Define the scope, and carry both unit systems on every row

Scope, stated in the card because it was only ever implicit: this dataset stops
at the unit. Dimensions, volumes, capacity, nesting, naming and standards
conformance for the tote itself; pallet builds, container loads and shelving
layouts are out. The one deliberate exception is eur1_pallet_per_layer, which is
the last figure that is purely a property of the box — everything past it depends
on build height and pallet standard, which are decisions rather than dimensions.
The card now also says what the thing is for: pallet, shelving and consolidation
calculations, and comparison on cost per usable litre.

Both unit systems on every row, in both tables, plus capacity in US gallons. The
comparison this dataset exists for is cross-market and one of the four vendors
designs in inches, so making half the readers convert before they can compare two
rows is where mistakes happen. listings.csv gains native_unit — which side is the
vendor's own figure and which is the conversion — because the derived side is
rounded and Hudson's own 19.6 in came back from a 1 dp centimetre value as
19.61. Imperial-native rows now pass their inch figures straight through.

The reason it matters is in the new guidance/units-and-us-vendors.md: inch-designed
totes land near the 600 x 400 module without hitting it. Hudson Exchange's
24 x 15 in "straight wall stacking tote" is 61.0 x 38.1 cm — one centimetre too
long to put four on a Euro pallet, so the layer pattern collapses from 4 to 2. The
same doc separates what is standardised (the footprint, by ISO 3394) from what is
only convention (the heights: of 18 distinct 600 x 400 heights here, exactly one
is fixed by a standard).

Fixes a data bug found while assembling that evidence: the hand-written Yosibox
rows used int literals, so listings.csv carried "60" in a float64 column that held
"60.0" everywhere else. Anyone grouping the CSV as strings saw 16 distinct
footprints where there are 14. add() now coerces the metric columns.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

README.md

@@ -34,20 +34,36 @@ dataset_info:
         dtype: float64
       - name: external_height_cm
         dtype: float64
+      - name: external_length_in
+        dtype: float64
+      - name: external_width_in
+        dtype: float64
+      - name: external_height_in
+        dtype: float64
       - name: external_volume_l
         dtype: float64
+      - name: external_volume_gal
+        dtype: float64
       - name: internal_length_cm
         dtype: float64
       - name: internal_width_cm
         dtype: float64
       - name: internal_height_cm
         dtype: float64
+      - name: internal_length_in
+        dtype: float64
+      - name: internal_width_in
+        dtype: float64
+      - name: internal_height_in
+        dtype: float64
       - name: internal_dims_basis
         dtype: string
       - name: internal_dims_vendors
         dtype: int64
       - name: typical_capacity_l
         dtype: float64
+      - name: typical_capacity_gal
+        dtype: float64
       - name: vendor_capacity_low_l
         dtype: float64
       - name: vendor_capacity_high_l
@@ -95,22 +111,40 @@ dataset_info:
         dtype: string
       - name: type
         dtype: string
+      - name: native_unit
+        dtype: string
       - name: external_length_cm
         dtype: float64
       - name: external_width_cm
         dtype: float64
       - name: external_height_cm
         dtype: float64
+      - name: external_length_in
+        dtype: float64
+      - name: external_width_in
+        dtype: float64
+      - name: external_height_in
+        dtype: float64
       - name: internal_length_cm
         dtype: float64
       - name: internal_width_cm
         dtype: float64
       - name: internal_height_cm
         dtype: float64
+      - name: internal_length_in
+        dtype: float64
+      - name: internal_width_in
+        dtype: float64
+      - name: internal_height_in
+        dtype: float64
       - name: stated_capacity_l
         dtype: float64
+      - name: stated_capacity_gal
+        dtype: float64
       - name: external_volume_l
         dtype: float64
+      - name: external_volume_gal
+        dtype: float64
       - name: usable_ratio
         dtype: float64
       - name: price
@@ -162,6 +196,49 @@ judgement call about a spread of real products; `listings.csv` is that spread, w
 URLs and capture dates, so you can disagree with a number and see exactly what it
 was averaged from.
 
+Every dimension appears in **both centimetres and inches**, and every capacity in
+**litres and US gallons** — the comparison this dataset exists for is cross-market, and
+one of the four vendors here designs in inches. Which side is the vendor's own figure
+and which is derived is recorded per listing in `native_unit`.
+
+## Scope
+
+**This dataset stops at the unit.** It describes the smallest standardised unit of
+industrial storage — the tote — and nothing above it.
+
+| In scope | Out of scope |
+|---|---|
+| External and internal dimensions, both unit systems | Pallet builds and load patterns |
+| External volume and usable capacity | Container loads, TEU utilisation, stowage |
+| Nesting and stacking behaviour | Shelving and racking layouts |
+| Lid arrangement, standards conformance | Live pricing, availability, lead times |
+| What the trade calls each family, per geography | Any one manufacturer's exact spec |
+
+The one deliberate exception is `eur1_pallet_per_layer`, a convenience column giving
+the footprint count on a 1200 × 800 deck. It is the last thing that is purely a
+property of the box; anything past it depends on build height, pallet standard and
+container choice, which are decisions rather than dimensions.
+
+Prices in `listings.csv` are **captured observations with a date on them**, kept so a
+capacity figure can be audited against what was really on sale. They are not a price
+feed and will rot.
+
+## What it is for
+
+The point of a dimensional dataset is that the calculations downstream of it are
+somebody else's. In practice these are:
+
+- **Pallet load calculation** — how many units per layer and per pallet, and the
+  build height that follows. The footprints tile a 1200 × 800 and a 1200 × 1000 deck
+  exactly, which is the whole reason the module exists.
+- **Shelving and racking calculation** — industrial racking, business storeroom or
+  domestic shelf: how many boxes per bay, and which height variant uses a given shelf
+  pitch without wasting the gap above it.
+- **Consolidation and move planning** — how much of a shelf, room or shipment a given
+  box count becomes, and how much less it becomes if the boxes nest.
+- **Purchase comparison** — ranking products on cost per *usable* litre rather than on
+  the nominal size printed on the listing.
+
 ## The point of it
 
 If you are costing out a purchase or sizing a shipment, you need to know that a
@@ -174,6 +251,22 @@ That gap is the whole reason this dataset exists.
 
 ## Read this before using the numbers
 
+**The footprint is standardised. The heights mostly are not. The insides are not at
+all.**
+
+ISO 3394 fixes the 600 × 400 mm module and its submultiples, which is why the metric
+range tiles a Euro pallet exactly. Heights are a different matter: of the 18 distinct
+600 × 400 heights in `containers.csv`, exactly **one** — 280 mm — is fixed by a
+standard (VDA 4500). The rest are convention, and manufacturers ship one-off variants
+inside it. Attached-lid heights are vendor convention throughout, to the point where
+the same 80 L box is listed at both 400 and 420 mm.
+
+**US vendors design in inches, and some of their totes land near the 600 × 400 module
+without hitting it.** Hudson Exchange's 24 × 15 in "straight wall stacking tote" is
+61.0 × 38.1 cm — one centimetre too long to put four on a Euro pallet, so the pattern
+collapses to two. Full table of the near misses, and what `native_unit` is for:
+**[`guidance/units-and-us-vendors.md`](guidance/units-and-us-vendors.md)**.
+
 **The standards fix external dimensions. They do not fix internal ones.**
 
 ISO 3394 defines the 600 × 400 mm packaging module. EN 13199 caps a small load
@@ -205,11 +298,15 @@ a large order.**
 | `type_label` | Human-readable form of `type` |
 | `common_names` | Semicolon-separated search terms, ordered most standard to most colloquial, including regional ones (`Eurobehälter`, `bac gerbable`) and genericised vendor names (`Hudson box`). Search terms only — never discriminate families on them, see [`guidance/naming.md`](guidance/naming.md) |
 | `external_length_cm` / `external_width_cm` / `external_height_cm` | External, in cm |
+| `external_length_in` / `external_width_in` / `external_height_in` | The same, in inches. Always the derived side on this table — these nominal sizes are fixed in millimetres by the standards |
 | `external_volume_l` | L × W × H. **Not** what the box holds |
+| `external_volume_gal` | The same, in US liquid gallons |
 | `internal_length_cm` / `internal_width_cm` / `internal_height_cm` | Typical internal, in cm. Populated for every Euro row and for the two KLT sizes a vendor publishes; empty for ALCs — see below |
+| `internal_length_in` / `internal_width_in` / `internal_height_in` | The same, in inches |
 | `internal_dims_basis` | Where those internal figures came from: `vendor_average_rule`, `vendor_published`, `not_published`, `not_published_tapered_walls` |
 | `internal_dims_vendors` | How many **vendors** publish internal dimensions for this footprint. Vendors, not listings — one mould in five colours is one opinion |
 | `typical_capacity_l` | **The usable number.** Always populated |
+| `typical_capacity_gal` | The same, in US liquid gallons |
 | `vendor_capacity_low_l` / `vendor_capacity_high_l` | Capacity implied by the least and the most generous vendor's own published internal dimensions for this footprint. Empty where no vendor publishes any. See [`guidance/internal-dimensions.md`](guidance/internal-dimensions.md) |
 | `usable_ratio` | `typical_capacity_l / external_volume_l` |
 | `capacity_basis` | How the capacity was arrived at — see below |
@@ -220,7 +317,7 @@ a large order.**
 | `standard_conformant` | Whether the footprint conforms to a recognised module |
 | `standard` | Which one, stated precisely |
 | `vda_4500_height` | Whether the external height is on the VDA KLT grid |
-| `eur1_pallet_per_layer` | Boxes per layer on a 1200 × 800 Euro pallet, no overhang |
+| `eur1_pallet_per_layer` | Boxes per layer on a 1200 × 800 Euro pallet, no overhang. The one column that reaches past the box itself — see [Scope](#scope) |
 | `listings_observed` | How many rows in the `listings` table back this size — 0 means the row is a plausible interpolation, not something seen for sale |
 | `notes` | Per-row caveats. Read these |
 
@@ -285,9 +382,16 @@ still empty: nobody in `listings.csv` sells them with a spec sheet attached.
 ## The `listings` table
 
 121 individual vendor listings across four markets, each with the date it was
-captured. Same dimensional columns as the main table, plus `vendor`,
-`vendor_country`, `url`, `sku`, `price`, `currency`, `price_includes_vat`,
-`pack_quantity`, `unit_price` and `captured_date`.
+captured. Same dimensional columns as the main table — in both unit systems — plus
+`vendor`, `vendor_country`, `url`, `sku`, `native_unit`, `price`, `currency`,
+`price_includes_vat`, `pack_quantity`, `unit_price` and `captured_date`.
+
+`native_unit` is `imperial` or `metric`: which unit the vendor's own catalogue
+publishes in, and therefore which column is the figure and which is the conversion.
+Hudson Exchange is the imperial one. It matters because inch-designed totes land near
+the 600 × 400 module without hitting it — their 24 × 15 in tote is 61.0 × 38.1 cm,
+one centimetre too long to put four on a Euro pallet. See
+[`guidance/units-and-us-vendors.md`](guidance/units-and-us-vendors.md).
 
 | Vendor | Market | Listings | Publishes internals | Captured |
 |---|---|---|---|---|
@@ -402,6 +506,9 @@ Longer notes that did not fit the card:
   market, which of those names are evidenced here, and the two that mislead.
 - [`guidance/eurobox-vs-alc-same-size.md`](guidance/eurobox-vs-alc-same-size.md) —
   what the ALC taper actually costs you, worked through.
+- [`guidance/units-and-us-vendors.md`](guidance/units-and-us-vendors.md) — both unit
+  systems, what `native_unit` is for, the US near-miss footprints, and precisely what
+  is standardised and what is only convention.
 
 ## Regenerating
 

build.py

@@ -40,6 +40,17 @@ STRAIGHT_WALL_RULES = {
 # one published pair: R-KLT 6429, 600x400x280 external = 67.2 L, 48 L internal.
 VDA_USABLE_RATIO = 48 / 67.2
 
+MM_PER_IN = 25.4
+L_PER_US_GAL = 3.785411784
+
+
+def inches(mm):
+    return round(mm / MM_PER_IN, 2)
+
+
+def gallons(litres):
+    return round(litres / L_PER_US_GAL, 1)
+
 # Search terms, not a taxonomy. Ordered from the most standard to the most
 # colloquial, and deliberately including the loose and the regional: someone
 # searching "Hudson box" or "industrial tote" should land on the right family.
@@ -192,16 +203,29 @@ def row(kind, L, W, H, capacity_l=None, note="", vda_code=None):
         "type": kind,
         "type_label": TYPE_LABELS[kind],
         "common_names": NAMES[kind],
+        # Both unit systems on every row. These nominal sizes are metric by
+        # definition — the standards fix them in millimetres — so the inch columns
+        # are always the derived side here, unlike listings.csv where a US vendor's
+        # own figure is the inch one. They are carried anyway because the reader
+        # comparing a US tote against a Eurobox should not have to convert first.
         "external_length_cm": L / 10,
         "external_width_cm": W / 10,
         "external_height_cm": H / 10,
+        "external_length_in": inches(L),
+        "external_width_in": inches(W),
+        "external_height_in": inches(H),
         "external_volume_l": round(ext_l, 1),
+        "external_volume_gal": gallons(ext_l),
         "internal_length_cm": int_l / 10 if int_l else "",
         "internal_width_cm": int_w / 10 if int_w else "",
         "internal_height_cm": int_h / 10 if int_h else "",
+        "internal_length_in": inches(int_l) if int_l else "",
+        "internal_width_in": inches(int_w) if int_w else "",
+        "internal_height_in": inches(int_h) if int_h else "",
         "internal_dims_basis": dims_basis,
         "internal_dims_vendors": internal_dims_vendors(kind, L, W),
         "typical_capacity_l": cap,
+        "typical_capacity_gal": gallons(cap),
         # The same external size quoted by different vendors. Empty where no
         # vendor in listings.csv publishes internal dimensions for the footprint.
         "vendor_capacity_low_l": cap_low,
@@ -312,7 +336,10 @@ DTYPES = {
         "external_volume_l", "internal_length_cm", "internal_width_cm",
         "internal_height_cm", "typical_capacity_l", "vendor_capacity_low_l",
         "vendor_capacity_high_l", "usable_ratio",
-        "typical_nesting_ratio", "stated_capacity_l", "price", "unit_price")},
+        "typical_nesting_ratio", "stated_capacity_l", "price", "unit_price",
+        "external_length_in", "external_width_in", "external_height_in",
+        "internal_length_in", "internal_width_in", "internal_height_in",
+        "external_volume_gal", "typical_capacity_gal", "stated_capacity_gal")},
 }
 
 

build_listings.py

@@ -24,19 +24,53 @@ RAW = HERE / "raw"
 IN_TO_CM = 2.54
 US_GAL_TO_L = 3.785411784
 
+# vendor, country, currency, prices-include-VAT, unit the catalogue publishes in
 VENDOR_META = {
-    "hudsonex": ("Hudson Exchange", "US", "USD", False),
-    "plasticboxshop": ("Plastic Box Shop", "GB", "GBP", True),
+    "hudsonex": ("Hudson Exchange", "US", "USD", False, "imperial"),
+    "plasticboxshop": ("Plastic Box Shop", "GB", "GBP", True, "metric"),
 }
 
 ROWS = []
 
 
 def add(**kw):
+    # Normalise the metric dimensions to float before anything derives from them.
+    # The hand-written vendor blocks below use int literals where a dimension is a
+    # round number, which wrote "60" into a column that is float64 everywhere else
+    # and broke grouping: "60" and "60.0" are different keys to anyone filtering
+    # the CSV as strings.
+    for f in ("external_length_cm", "external_width_cm", "external_height_cm",
+              "internal_length_cm", "internal_width_cm", "internal_height_cm",
+              "stated_capacity_l"):
+        if kw.get(f) not in (None, ""):
+            kw[f] = float(kw[f])
+
     ext = kw["external_length_cm"] * kw["external_width_cm"] * kw["external_height_cm"] / 1000
     cap = kw.get("stated_capacity_l")
     kw["external_volume_l"] = round(ext, 1)
     kw["usable_ratio"] = round(cap / ext, 3) if cap and ext else ""
+
+    # Every row carries both unit systems, whichever the vendor published in.
+    # A US buyer shops in inches and gallons; anyone sizing European shelving or
+    # checking pallet interoperability needs mm. Converting on read means half the
+    # audience does arithmetic before it can compare two rows.
+    #
+    # native_unit records which side of the conversion is the vendor's own figure
+    # and which is derived. It matters: Hudson Exchange designs to inches, so its
+    # 21.9 x 15.2" tote is 55.6 x 38.6 cm — close enough to a 600 x 400 Eurobox to
+    # look like one in a catalogue, and not the same box.
+    # Derive only the side the vendor did not publish. An imperial-native vendor
+    # passes its own inch figures in, because back-converting a cm value that was
+    # itself rounded to 1 dp turns Hudson's own 19.6" into 19.61".
+    for axis in ("length", "width", "height"):
+        cm = kw.get(f"external_{axis}_cm")
+        if not kw.get(f"external_{axis}_in"):
+            kw[f"external_{axis}_in"] = round(cm / IN_TO_CM, 2) if cm else ""
+        icm = kw.get(f"internal_{axis}_cm")
+        if not kw.get(f"internal_{axis}_in"):
+            kw[f"internal_{axis}_in"] = round(icm / IN_TO_CM, 2) if icm else ""
+    kw["stated_capacity_gal"] = round(cap / US_GAL_TO_L, 1) if cap else ""
+    kw["external_volume_gal"] = round(ext / US_GAL_TO_L, 1) if ext else ""
     ROWS.append(kw)
 
 
@@ -50,7 +84,7 @@ def snapshot(name):
 # only confirms "tapered interior wall allow for nesting when not in use".
 # ---------------------------------------------------------------------------
 snap = snapshot("hudsonex-hudson-exchange-attached-lid-containers-2026-07-27.json")
-vendor, country, currency, vat = VENDOR_META["hudsonex"]
+vendor, country, currency, vat, unit = VENDOR_META["hudsonex"]
 TITLE_RE = re.compile(r'([\d.]+)\s*x\s*([\d.]+)\s*x\s*([\d.]+)\s*["”\']?\s*\(([\d.]+)\s*Gallon\)', re.I)
 # "Pallet Deal (120 Totes) ..." — the tote count sits in its own parenthetical,
 # ahead of the dimensions, so it needs a separate pattern from the UK packs.
@@ -67,14 +101,16 @@ for p in snap["products"]:
     price = float(p["price"])
     add(
         listing_id=f"hudsonex-{p['sku'] or p['handle']}",
-        vendor=vendor, vendor_country=country,
+        vendor=vendor, vendor_country=country, native_unit=unit,
         product_name=p["title"], sku=p["sku"] or "", url=p["url"],
         type="euro_stacking_container" if straight else "attached_lid_container",
         external_length_cm=round(L * IN_TO_CM, 1),
         external_width_cm=round(W * IN_TO_CM, 1),
         external_height_cm=round(H * IN_TO_CM, 1),
+        external_length_in=L, external_width_in=W, external_height_in=H,
         internal_length_cm="", internal_width_cm="", internal_height_cm="",
         stated_capacity_l=round(gal * US_GAL_TO_L, 1),
+        stated_capacity_gal=gal,
         price=price, currency=currency, price_includes_vat=vat,
         pack_quantity=qty, unit_price=round(price / qty, 2),
         captured_date=snap["captured_utc"],
@@ -102,7 +138,7 @@ PACK_RE = re.compile(r'(?:Pack|Pallet(?:\s+Deal)?)\s*(?:of\s*)?x?\s*(\d+)', re.I
 for fn, kind in (("plasticboxshop-alc-containers-2026-07-27.json", "attached_lid_container"),
                  ("plasticboxshop-euro-stacking-containers-2026-07-27.json", "euro_stacking_container")):
     snap = snapshot(fn)
-    vendor, country, currency, vat = VENDOR_META["plasticboxshop"]
+    vendor, country, currency, vat, unit = VENDOR_META["plasticboxshop"]
     for p in snap["products"]:
         blob = p["title"] + " " + (p["description"] or "")
         dims = {m.group(1).lower(): tuple(float(x) for x in m.groups()[1:])
@@ -121,7 +157,7 @@ for fn, kind in (("plasticboxshop-alc-containers-2026-07-27.json", "attached_lid
         internal = dims.get("internal", ("", "", ""))
         add(
             listing_id=f"plasticboxshop-{p['handle']}",
-            vendor=vendor, vendor_country=country,
+            vendor=vendor, vendor_country=country, native_unit=unit,
             product_name=p["title"], sku=p["sku"] or "", url=p["url"],
             type=kind,
             external_length_cm=ext[0], external_width_cm=ext[1], external_height_cm=ext[2],
@@ -159,7 +195,7 @@ for name, ext, internal, cap, price, item in YOSIBOX:
     i = internal or ("", "", "")
     add(
         listing_id=f"yosibox-{item}",
-        vendor="Yosibox", vendor_country="IL",
+        vendor="Yosibox", vendor_country="IL", native_unit="metric",
         product_name=name, sku="", url=f"https://www.yosibox.com/items/{item}",
         type="euro_stacking_container",
         external_length_cm=ext[0], external_width_cm=ext[1], external_height_cm=ext[2],
@@ -254,7 +290,7 @@ for p in snap["products"]:
         notes.append("Price on application at capture")
     add(
         listing_id=f"salesbridges-{ident}",
-        vendor="Salesbridges", vendor_country="NL",
+        vendor="Salesbridges", vendor_country="NL", native_unit="metric",
         product_name=p["title"], sku=p["sku"], url=p["url"],
         type=kind,
         external_length_cm=ext[0], external_width_cm=ext[1], external_height_cm=ext[2],
@@ -270,9 +306,13 @@ for p in snap["products"]:
 
 FIELDS = [
     "listing_id", "vendor", "vendor_country", "product_name", "sku", "url", "type",
+    "native_unit",
     "external_length_cm", "external_width_cm", "external_height_cm",
+    "external_length_in", "external_width_in", "external_height_in",
     "internal_length_cm", "internal_width_cm", "internal_height_cm",
-    "stated_capacity_l", "external_volume_l", "usable_ratio",
+    "internal_length_in", "internal_width_in", "internal_height_in",
+    "stated_capacity_l", "stated_capacity_gal",
+    "external_volume_l", "external_volume_gal", "usable_ratio",
     "price", "currency", "price_includes_vat", "pack_quantity", "unit_price",
     "captured_date", "notes",
 ]

containers.csv

@@ -1,49 +1,49 @@
-id,type,type_label,common_names,external_length_cm,external_width_cm,external_height_cm,external_volume_l,internal_length_cm,internal_width_cm,internal_height_cm,internal_dims_basis,internal_dims_vendors,typical_capacity_l,vendor_capacity_low_l,vendor_capacity_high_l,usable_ratio,capacity_basis,lidded,lid_available_separately,nestable_when_empty,typical_nesting_ratio,standard_conformant,standard,vda_4500_height,eur1_pallet_per_layer,listings_observed,notes
-euro-600x400x120,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,12.0,28.8,55.0,35.5,10.5,vendor_average_rule,3,20.5,20.8,24.3,0.712,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
-euro-600x400x150,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,15.0,36.0,55.0,35.5,13.5,vendor_average_rule,3,26.4,26.7,30.6,0.733,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,1,
-euro-600x400x170,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,17.0,40.8,55.0,35.5,15.5,vendor_average_rule,3,30.3,30.7,34.8,0.743,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
-euro-600x400x175,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,17.5,42.0,55.0,35.5,16.0,vendor_average_rule,3,31.2,31.7,35.9,0.743,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
-euro-600x400x200,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,20.0,48.0,55.0,35.5,18.5,vendor_average_rule,3,36.1,36.6,41.1,0.752,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
-euro-600x400x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,22.0,52.8,55.0,35.5,20.5,vendor_average_rule,3,40.0,40.6,45.3,0.758,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,6,
-euro-600x400x230,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,23.0,55.2,55.0,35.5,21.5,vendor_average_rule,3,42.0,42.6,47.5,0.761,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
-euro-600x400x240,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,24.0,57.6,55.0,35.5,22.5,vendor_average_rule,3,43.9,44.5,49.6,0.762,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,5,
-euro-600x400x270,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,27.0,64.8,55.0,35.5,25.5,vendor_average_rule,3,49.8,50.5,55.9,0.769,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,8,
-euro-600x400x280,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,28.0,67.2,55.0,35.5,26.5,vendor_average_rule,3,51.7,52.5,58.0,0.769,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,True,4,3,
-euro-600x400x300,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,30.0,72.0,55.0,35.5,28.5,vendor_average_rule,3,55.6,56.4,62.2,0.772,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
-euro-600x400x310,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,31.0,74.4,55.0,35.5,29.5,vendor_average_rule,3,57.6,58.4,64.3,0.774,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,1,
-euro-600x400x320,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,32.0,76.8,55.0,35.5,30.5,vendor_average_rule,3,59.6,60.4,66.4,0.776,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,7,
-euro-600x400x340,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,34.0,81.6,55.0,35.5,32.5,vendor_average_rule,3,63.5,64.3,70.7,0.778,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,3,
-euro-600x400x365,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,36.5,87.6,55.0,35.5,35.0,vendor_average_rule,3,68.3,69.3,75.9,0.78,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,1,
-euro-600x400x400,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,40.0,96.0,55.0,35.5,38.5,vendor_average_rule,3,75.2,76.2,83.3,0.783,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
-euro-600x400x420,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,42.0,100.8,55.0,35.5,40.5,vendor_average_rule,3,79.1,80.2,87.5,0.785,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
-euro-600x400x465,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,46.5,111.6,55.0,35.5,45.0,vendor_average_rule,3,87.9,89.1,97.0,0.788,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,0,
-euro-400x300x120,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,12.0,14.4,35.0,25.0,11.0,vendor_average_rule,2,9.6,10.0,11.5,0.667,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,2,
-euro-400x300x150,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,15.0,18.0,35.0,25.0,14.0,vendor_average_rule,2,12.2,12.7,14.5,0.678,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,1,
-euro-400x300x170,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,17.0,20.4,35.0,25.0,16.0,vendor_average_rule,2,14.0,14.5,16.5,0.686,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,1,
-euro-400x300x200,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,20.0,24.0,35.0,25.0,19.0,vendor_average_rule,2,16.6,17.2,19.5,0.692,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
-euro-400x300x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,22.0,26.4,35.0,25.0,21.0,vendor_average_rule,2,18.4,19.0,21.5,0.697,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,5,
-euro-400x300x230,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,23.0,27.6,35.0,25.0,22.0,vendor_average_rule,2,19.2,19.9,22.5,0.696,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,3,
-euro-400x300x240,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,24.0,28.8,35.0,25.0,23.0,vendor_average_rule,2,20.1,20.8,23.5,0.698,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,2,
-euro-400x300x270,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,27.0,32.4,35.0,25.0,26.0,vendor_average_rule,2,22.8,23.5,26.5,0.704,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,6,
-euro-400x300x320,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,32.0,38.4,35.0,25.0,31.0,vendor_average_rule,2,27.1,28.1,31.5,0.706,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,5,
-euro-300x200x120,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,12.0,7.2,26.0,16.0,11.0,vendor_average_rule,2,4.6,4.6,5.3,0.639,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,2,
-euro-300x200x150,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,15.0,9.0,26.0,16.0,14.0,vendor_average_rule,2,5.8,5.8,6.7,0.644,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,0,
-euro-300x200x170,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,17.0,10.2,26.0,16.0,16.0,vendor_average_rule,2,6.7,6.7,7.6,0.657,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,1,
-euro-300x200x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,22.0,13.2,26.0,16.0,21.0,vendor_average_rule,2,8.7,8.7,9.9,0.659,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,0,
-euro-800x600x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),80.0,60.0,22.0,105.6,75.0,55.0,20.0,vendor_average_rule,1,82.5,90.0,90.0,0.781,derived_from_internal_dims,False,True,False,0.0,True,Euro pallet module (half of 1200x800); exceeds the EN 13199 600x400 small-load-carrier cap,False,2,2,800x600 internal rule is not cross-checked against a published internal dimension; thin-walled containers of this size are marketed above it
-euro-800x600x320,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),80.0,60.0,32.0,153.6,75.0,55.0,30.0,vendor_average_rule,1,123.8,133.9,133.9,0.806,derived_from_internal_dims,False,True,False,0.0,True,Euro pallet module (half of 1200x800); exceeds the EN 13199 600x400 small-load-carrier cap,False,2,1,800x600 internal rule is not cross-checked against a published internal dimension; thin-walled containers of this size are marketed above it
-euro-800x600x420,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),80.0,60.0,42.0,201.6,75.0,55.0,40.0,vendor_average_rule,1,165.0,177.8,177.8,0.818,derived_from_internal_dims,False,True,False,0.0,True,Euro pallet module (half of 1200x800); exceeds the EN 13199 600x400 small-load-carrier cap,False,2,1,800x600 internal rule is not cross-checked against a published internal dimension; thin-walled containers of this size are marketed above it
-alc-600x400x250,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,25.0,60.0,,,,not_published_tapered_walls,0,44,,,0.733,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,0,
-alc-600x400x310,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,31.0,74.4,,,,not_published_tapered_walls,0,56,,,0.753,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,"Nominal capacity for this external size varies by range: 56 L (Loadhog/Kaiman-compatible), 55 L and 53 L are all sold"
-alc-600x400x367,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,36.7,88.1,,,,not_published_tapered_walls,0,65,,,0.738,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
-alc-600x400x400,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,40.0,96.0,,,,not_published_tapered_walls,0,80,,,0.833,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,0,"Outlier: 83 % usable ratio where the rest of the range sits at 73-75 %. Published figure, not independently measured — treat with caution"
-alc-400x300x222,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",40.0,30.0,22.2,26.6,,,,not_published_tapered_walls,0,22,,,0.826,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
-alc-400x300x264,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",40.0,30.0,26.4,31.7,,,,not_published_tapered_walls,0,25,,,0.789,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
-alc-400x300x306,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",40.0,30.0,30.6,36.7,,,,not_published_tapered_walls,0,30,,,0.817,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
-vda-rklt-6415,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),60.0,40.0,14.75,35.4,,,,not_published,1,25.3,23.5,23.5,0.715,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,4,0,
-vda-rklt-6422,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),60.0,40.0,21.3,51.1,,,,not_published,1,36.5,36.4,36.4,0.714,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,4,0,
-vda-rklt-6429,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),60.0,40.0,28.0,67.2,54.4,36.2,25.2,vendor_published,1,48.0,49.6,49.6,0.714,published,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,4,2,"Published: 65 L external / 48 L internal, tare 2.97 kg. Anchors the KLT ratio used for the other two heights"
-vda-rklt-4315,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),40.0,30.0,14.75,17.7,,,,not_published,1,12.6,11.5,11.5,0.712,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,8,0,
-vda-rklt-4322,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),40.0,30.0,21.3,25.6,,,,not_published,1,18.3,17.4,17.4,0.716,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,8,0,
-vda-rklt-4329,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),40.0,30.0,28.0,33.6,34.6,26.0,26.0,vendor_published,1,24.0,23.4,23.4,0.714,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,8,1,
-vda-rklt-3215,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),30.0,20.0,14.75,8.8,,,,not_published,0,6.3,,,0.712,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,16,0,The 300x200 module exists only in the 147.5 mm height
+id,type,type_label,common_names,external_length_cm,external_width_cm,external_height_cm,external_length_in,external_width_in,external_height_in,external_volume_l,external_volume_gal,internal_length_cm,internal_width_cm,internal_height_cm,internal_length_in,internal_width_in,internal_height_in,internal_dims_basis,internal_dims_vendors,typical_capacity_l,typical_capacity_gal,vendor_capacity_low_l,vendor_capacity_high_l,usable_ratio,capacity_basis,lidded,lid_available_separately,nestable_when_empty,typical_nesting_ratio,standard_conformant,standard,vda_4500_height,eur1_pallet_per_layer,listings_observed,notes
+euro-600x400x120,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,12.0,23.62,15.75,4.72,28.8,7.6,55.0,35.5,10.5,21.65,13.98,4.13,vendor_average_rule,3,20.5,5.4,20.8,24.3,0.712,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
+euro-600x400x150,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,15.0,23.62,15.75,5.91,36.0,9.5,55.0,35.5,13.5,21.65,13.98,5.31,vendor_average_rule,3,26.4,7.0,26.7,30.6,0.733,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,1,
+euro-600x400x170,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,17.0,23.62,15.75,6.69,40.8,10.8,55.0,35.5,15.5,21.65,13.98,6.1,vendor_average_rule,3,30.3,8.0,30.7,34.8,0.743,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
+euro-600x400x175,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,17.5,23.62,15.75,6.89,42.0,11.1,55.0,35.5,16.0,21.65,13.98,6.3,vendor_average_rule,3,31.2,8.2,31.7,35.9,0.743,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
+euro-600x400x200,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,20.0,23.62,15.75,7.87,48.0,12.7,55.0,35.5,18.5,21.65,13.98,7.28,vendor_average_rule,3,36.1,9.5,36.6,41.1,0.752,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
+euro-600x400x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,22.0,23.62,15.75,8.66,52.8,13.9,55.0,35.5,20.5,21.65,13.98,8.07,vendor_average_rule,3,40.0,10.6,40.6,45.3,0.758,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,6,
+euro-600x400x230,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,23.0,23.62,15.75,9.06,55.2,14.6,55.0,35.5,21.5,21.65,13.98,8.46,vendor_average_rule,3,42.0,11.1,42.6,47.5,0.761,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
+euro-600x400x240,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,24.0,23.62,15.75,9.45,57.6,15.2,55.0,35.5,22.5,21.65,13.98,8.86,vendor_average_rule,3,43.9,11.6,44.5,49.6,0.762,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,5,
+euro-600x400x270,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,27.0,23.62,15.75,10.63,64.8,17.1,55.0,35.5,25.5,21.65,13.98,10.04,vendor_average_rule,3,49.8,13.2,50.5,55.9,0.769,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,8,
+euro-600x400x280,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,28.0,23.62,15.75,11.02,67.2,17.8,55.0,35.5,26.5,21.65,13.98,10.43,vendor_average_rule,3,51.7,13.7,52.5,58.0,0.769,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,True,4,3,
+euro-600x400x300,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,30.0,23.62,15.75,11.81,72.0,19.0,55.0,35.5,28.5,21.65,13.98,11.22,vendor_average_rule,3,55.6,14.7,56.4,62.2,0.772,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
+euro-600x400x310,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,31.0,23.62,15.75,12.2,74.4,19.7,55.0,35.5,29.5,21.65,13.98,11.61,vendor_average_rule,3,57.6,15.2,58.4,64.3,0.774,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,1,
+euro-600x400x320,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,32.0,23.62,15.75,12.6,76.8,20.3,55.0,35.5,30.5,21.65,13.98,12.01,vendor_average_rule,3,59.6,15.7,60.4,66.4,0.776,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,7,
+euro-600x400x340,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,34.0,23.62,15.75,13.39,81.6,21.6,55.0,35.5,32.5,21.65,13.98,12.8,vendor_average_rule,3,63.5,16.8,64.3,70.7,0.778,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,3,
+euro-600x400x365,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,36.5,23.62,15.75,14.37,87.6,23.1,55.0,35.5,35.0,21.65,13.98,13.78,vendor_average_rule,3,68.3,18.0,69.3,75.9,0.78,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,1,
+euro-600x400x400,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,40.0,23.62,15.75,15.75,96.0,25.4,55.0,35.5,38.5,21.65,13.98,15.16,vendor_average_rule,3,75.2,19.9,76.2,83.3,0.783,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
+euro-600x400x420,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,42.0,23.62,15.75,16.54,100.8,26.6,55.0,35.5,40.5,21.65,13.98,15.94,vendor_average_rule,3,79.1,20.9,80.2,87.5,0.785,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,4,
+euro-600x400x465,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),60.0,40.0,46.5,23.62,15.75,18.31,111.6,29.5,55.0,35.5,45.0,21.65,13.98,17.72,vendor_average_rule,3,87.9,23.2,89.1,97.0,0.788,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,0,
+euro-400x300x120,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,12.0,15.75,11.81,4.72,14.4,3.8,35.0,25.0,11.0,13.78,9.84,4.33,vendor_average_rule,2,9.6,2.5,10.0,11.5,0.667,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,2,
+euro-400x300x150,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,15.0,15.75,11.81,5.91,18.0,4.8,35.0,25.0,14.0,13.78,9.84,5.51,vendor_average_rule,2,12.2,3.2,12.7,14.5,0.678,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,1,
+euro-400x300x170,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,17.0,15.75,11.81,6.69,20.4,5.4,35.0,25.0,16.0,13.78,9.84,6.3,vendor_average_rule,2,14.0,3.7,14.5,16.5,0.686,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,1,
+euro-400x300x200,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,20.0,15.75,11.81,7.87,24.0,6.3,35.0,25.0,19.0,13.78,9.84,7.48,vendor_average_rule,2,16.6,4.4,17.2,19.5,0.692,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
+euro-400x300x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,22.0,15.75,11.81,8.66,26.4,7.0,35.0,25.0,21.0,13.78,9.84,8.27,vendor_average_rule,2,18.4,4.9,19.0,21.5,0.697,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,5,
+euro-400x300x230,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,23.0,15.75,11.81,9.06,27.6,7.3,35.0,25.0,22.0,13.78,9.84,8.66,vendor_average_rule,2,19.2,5.1,19.9,22.5,0.696,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,3,
+euro-400x300x240,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,24.0,15.75,11.81,9.45,28.8,7.6,35.0,25.0,23.0,13.78,9.84,9.06,vendor_average_rule,2,20.1,5.3,20.8,23.5,0.698,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,2,
+euro-400x300x270,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,27.0,15.75,11.81,10.63,32.4,8.6,35.0,25.0,26.0,13.78,9.84,10.24,vendor_average_rule,2,22.8,6.0,23.5,26.5,0.704,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,6,
+euro-400x300x320,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),40.0,30.0,32.0,15.75,11.81,12.6,38.4,10.1,35.0,25.0,31.0,13.78,9.84,12.2,vendor_average_rule,2,27.1,7.2,28.1,31.5,0.706,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,5,
+euro-300x200x120,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,12.0,11.81,7.87,4.72,7.2,1.9,26.0,16.0,11.0,10.24,6.3,4.33,vendor_average_rule,2,4.6,1.2,4.6,5.3,0.639,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,2,
+euro-300x200x150,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,15.0,11.81,7.87,5.91,9.0,2.4,26.0,16.0,14.0,10.24,6.3,5.51,vendor_average_rule,2,5.8,1.5,5.8,6.7,0.644,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,0,
+euro-300x200x170,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,17.0,11.81,7.87,6.69,10.2,2.7,26.0,16.0,16.0,10.24,6.3,6.3,vendor_average_rule,2,6.7,1.8,6.7,7.6,0.657,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,1,
+euro-300x200x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),30.0,20.0,22.0,11.81,7.87,8.66,13.2,3.5,26.0,16.0,21.0,10.24,6.3,8.27,vendor_average_rule,2,8.7,2.3,8.7,9.9,0.659,derived_from_internal_dims,False,True,False,0.0,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,16,0,
+euro-800x600x220,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),80.0,60.0,22.0,31.5,23.62,8.66,105.6,27.9,75.0,55.0,20.0,29.53,21.65,7.87,vendor_average_rule,1,82.5,21.8,90.0,90.0,0.781,derived_from_internal_dims,False,True,False,0.0,True,Euro pallet module (half of 1200x800); exceeds the EN 13199 600x400 small-load-carrier cap,False,2,2,800x600 internal rule is not cross-checked against a published internal dimension; thin-walled containers of this size are marketed above it
+euro-800x600x320,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),80.0,60.0,32.0,31.5,23.62,12.6,153.6,40.6,75.0,55.0,30.0,29.53,21.65,11.81,vendor_average_rule,1,123.8,32.7,133.9,133.9,0.806,derived_from_internal_dims,False,True,False,0.0,True,Euro pallet module (half of 1200x800); exceeds the EN 13199 600x400 small-load-carrier cap,False,2,1,800x600 internal rule is not cross-checked against a published internal dimension; thin-walled containers of this size are marketed above it
+euro-800x600x420,euro_stacking_container,Euro stacking container (open top),Eurobox; Euro container; Eurocontainer; Euro stacking container; euro crate; stacking crate; stacking tote; straight-wall tote; industrial tote; KLT box (loose vendor usage); KLC; Eurobehälter (DE); Eurokiste (DE); Stapelbehälter (DE); bac gerbable (FR); bac Euronorme (FR); caja apilable (ES); stapelbak (NL),80.0,60.0,42.0,31.5,23.62,16.54,201.6,53.3,75.0,55.0,40.0,29.53,21.65,15.75,vendor_average_rule,1,165.0,43.6,177.8,177.8,0.818,derived_from_internal_dims,False,True,False,0.0,True,Euro pallet module (half of 1200x800); exceeds the EN 13199 600x400 small-load-carrier cap,False,2,1,800x600 internal rule is not cross-checked against a published internal dimension; thin-walled containers of this size are marketed above it
+alc-600x400x250,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,25.0,23.62,15.75,9.84,60.0,15.9,,,,,,,not_published_tapered_walls,0,44,11.6,,,0.733,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,0,
+alc-600x400x310,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,31.0,23.62,15.75,12.2,74.4,19.7,,,,,,,not_published_tapered_walls,0,56,14.8,,,0.753,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,"Nominal capacity for this external size varies by range: 56 L (Loadhog/Kaiman-compatible), 55 L and 53 L are all sold"
+alc-600x400x367,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,36.7,23.62,15.75,14.45,88.1,23.3,,,,,,,not_published_tapered_walls,0,65,17.2,,,0.738,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,2,
+alc-600x400x400,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",60.0,40.0,40.0,23.62,15.75,15.75,96.0,25.4,,,,,,,not_published_tapered_walls,0,80,21.1,,,0.833,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,4,0,"Outlier: 83 % usable ratio where the rest of the range sits at 73-75 %. Published figure, not independently measured — treat with caution"
+alc-400x300x222,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",40.0,30.0,22.2,15.75,11.81,8.74,26.6,7.0,,,,,,,not_published_tapered_walls,0,22,5.8,,,0.826,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
+alc-400x300x264,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",40.0,30.0,26.4,15.75,11.81,10.39,31.7,8.4,,,,,,,not_published_tapered_walls,0,25,6.6,,,0.789,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
+alc-400x300x306,attached_lid_container,Attached-lid container (ALC),"Attached lid container; ALC; attached top container; ATC; attached-lid tote; hinged-lid crate; crocodile-lid box (UK); Hudson box (US, after Hudson Exchange); distribution tote; industrial tote; Klappdeckelbehälter (DE); Deckelbehälter (DE); bac à couvercle solidaire (FR)",40.0,30.0,30.6,15.75,11.81,12.05,36.7,9.7,,,,,,,not_published_tapered_walls,0,30,7.9,,,0.817,vendor_nominal,True,False,True,0.75,True,ISO 3394 packaging module; within the EN 13199 600x400 small-load-carrier cap,False,8,0,
+vda-rklt-6415,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),60.0,40.0,14.75,23.62,15.75,5.81,35.4,9.4,,,,,,,not_published,1,25.3,6.7,23.5,23.5,0.715,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,4,0,
+vda-rklt-6422,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),60.0,40.0,21.3,23.62,15.75,8.39,51.1,13.5,,,,,,,not_published,1,36.5,9.6,36.4,36.4,0.714,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,4,0,
+vda-rklt-6429,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),60.0,40.0,28.0,23.62,15.75,11.02,67.2,17.8,54.4,36.2,25.2,21.42,14.25,9.92,vendor_published,1,48.0,12.7,49.6,49.6,0.714,published,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,4,2,"Published: 65 L external / 48 L internal, tare 2.97 kg. Anchors the KLT ratio used for the other two heights"
+vda-rklt-4315,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),40.0,30.0,14.75,15.75,11.81,5.81,17.7,4.7,,,,,,,not_published,1,12.6,3.3,11.5,11.5,0.712,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,8,0,
+vda-rklt-4322,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),40.0,30.0,21.3,15.75,11.81,8.39,25.6,6.8,,,,,,,not_published,1,18.3,4.8,17.4,17.4,0.716,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,8,0,
+vda-rklt-4329,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),40.0,30.0,28.0,15.75,11.81,11.02,33.6,8.9,34.6,26.0,26.0,13.62,10.24,10.24,vendor_published,1,24.0,6.3,23.4,23.4,0.714,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,8,1,
+vda-rklt-3215,vda_klt_container,VDA 4500 KLT (returnable small load carrier),KLT; R-KLT; RL-KLT; Kleinladungsträger (DE); VDA container; VDA 4500 carrier; small load carrier; SLC; automotive tote; returnable tote; ESD KLT (conductive),30.0,20.0,14.75,11.81,7.87,5.81,8.8,2.3,,,,,,,not_published,0,6.3,1.7,,,0.712,derived_from_klt_ratio,False,True,False,0.0,True,VDA 4500 (R-KLT); ISO 3394 packaging module; EN 13199 small load carrier,True,16,0,The 300x200 module exists only in the 147.5 mm height

guidance/units-and-us-vendors.md

@@ -0,0 +1,80 @@
+# Inches, centimetres, and why a US tote is not a Eurobox
+
+**Short answer: every row carries both unit systems, and `native_unit` on each
+listing tells you which one the vendor actually published. It matters more than a
+conversion should, because US totes are designed to inch dimensions and land near the
+600 × 400 module without hitting it — one of them costs you half a pallet layer.**
+
+Verified 30 July 2026 against the four catalogues in `listings.csv`.
+
+## Both units on every row
+
+`containers.csv` and `listings.csv` both carry `*_cm` and `*_in` dimension columns,
+plus capacity in litres and US gallons. Not because either audience cannot divide by
+25.4, but because the comparison this dataset exists for is **cross-market**: a US
+buyer shops in inches and gallons, and anyone sizing European shelving or checking
+pallet interoperability works in millimetres. Making half the readers convert before
+they can compare two rows is where mistakes get made.
+
+`native_unit` on `listings.csv` records which side is the vendor's own figure:
+
+| `native_unit` | Vendors | Authoritative column |
+|---|---|---|
+| `imperial` | Hudson Exchange (US) — 9 listings | `*_in`, `stated_capacity_gal` |
+| `metric` | Salesbridges (NL), Plastic Box Shop (GB), Yosibox (IL) — 112 listings | `*_cm`, `stated_capacity_l` |
+
+The derived side is rounded, so do not read precision into it. Hudson's own figure is
+`21.9 × 15.2 × 12.8 in`; the metric columns say `55.6 × 38.6 × 32.5 cm`. Converting
+that back gives 21.89 × 15.20 × 12.80 — the same box, one rounding step degraded. Use
+the native column when the difference matters.
+
+`containers.csv` has no `native_unit`: those rows are nominal sizes fixed in
+millimetres by the standards, so the inch columns are always the derived side.
+
+## The trap: near-miss footprints
+
+US totes are moulded to inch dimensions. Some of them land close enough to
+600 × 400 mm to read as Euroboxes in a catalogue, and they do not interoperate.
+Every Hudson Exchange footprint in `listings.csv`, against a EUR-1 pallet:
+
+| Native | Metric | vs 600 × 400 | Per 1200 × 800 layer |
+|---|---|--:|--:|
+| 19.6 × 11.6 in | 49.8 × 29.5 cm | −10.2, −10.5 cm | 4 (wastes 39 % of the deck) |
+| **21.9 × 15.2 in** | **55.6 × 38.6 cm** | **−4.4, −1.4 cm** | 4 (wastes 10 % of the deck) |
+| **24.0 × 15.0 in** | **61.0 × 38.1 cm** | **+1.0, −1.9 cm** | **2** |
+| 27.3 × 17.2 in | 69.3 × 43.7 cm | +9.3, +3.7 cm | 1 |
+| 28.1 × 20.8 in | 71.4 × 52.8 cm | +11.4, +12.8 cm | 1 |
+| 39.4 × 14.3 in | 100.1 × 36.3 cm | +40.1, −3.7 cm | 2 |
+
+The row to look at is **24 × 15 in = 61.0 × 38.1 cm**, listed as a "straight wall
+handled stacking tote". It is 1 cm longer than a Eurobox. Two of them across a
+1200 mm pallet need 1220 mm, so the pattern collapses from 4 per layer to **2** — you
+lose half your pallet load to a centimetre. A Eurobox tiles the deck exactly; this
+does not tile it at all.
+
+The 21.9 × 15.2 in tote is the subtler case: it still gets 4 per layer because it is
+*under* 600 × 400, but it leaves 10 % of the deck empty and will not interlock with
+genuine Euroboxes in a mixed stack.
+
+**None of these are 600 × 400 modules.** The `notes` field on the Hudson rows says so,
+and the `standard_conformant` column on `containers.csv` is the machine-readable
+version. If pallet or shelving interoperability matters, filter on the footprint in
+millimetres, not on a product being called an "industrial tote".
+
+## What is actually standardised, and what is not
+
+| | Standardised? |
+|---|---|
+| **Footprint** | **Yes.** ISO 3394 fixes the 600 × 400 mm module and its submultiples (400 × 300, 300 × 200, 200 × 150); EN 13199 caps a small load carrier at that footprint. This is why the metric range tiles a 1200 × 800 and a 1200 × 1000 pallet exactly. |
+| **Height** | **Mostly by convention, not by standard.** VDA 4500 fixes three external heights for KLTs (147.5, 213, 280 mm) and nothing else does. Of the 18 distinct 600 × 400 heights in `containers.csv`, exactly **one** — 280 mm — is standard-fixed. The rest are what manufacturers happen to make. |
+| **Internal dimensions** | **No.** Wall thickness, draft angle and rib design are the manufacturer's choice. See [`internal-dimensions.md`](internal-dimensions.md). |
+| **ALC heights** | **No.** The mainstream 600 × 400 grid (250 / 310 / 367 / 400 mm) is Loadhog and Schoeller Allibert convention. Vendors list the same 80 L box at 400 and at 420 mm. |
+
+So the expectation to carry into a purchase is: **the footprint will be right and the
+height will be approximately what you asked for.** Euroboxes cluster hard around the
+common heights and then there are one-off variants — this dataset carries 175, 365 and
+465 mm at 600 × 400 because real vendors sell them, and Salesbridges lists a
+59.5 × 40.0 cm footprint that is not a 600 × 400 module either. Do not assume a height
+you saw in one catalogue exists in another, and do not assume two vendors' "60 × 40 ×
+34" boxes stack on each other — the footprint says they will sit on the same pallet,
+nothing says their rims mate.

reference/storage-container-reference.pdf

@@ -114,7 +114,7 @@ endobj
 endobj
 15 0 obj
 <<
-/Author (Daniel Rosehill) /CreationDate (D:20260727180906+00'00') /Creator (\(unspecified\)) /Keywords () /ModDate (D:20260727180906+00'00') /Producer (ReportLab PDF Library - \(opensource\)) 
+/Author (Daniel Rosehill) /CreationDate (D:20260730123842+00'00') /Creator (\(unspecified\)) /Keywords () /ModDate (D:20260730123842+00'00') /Producer (ReportLab PDF Library - \(opensource\)) 
   /Subject (Container dimensions and capacities) /Title (Industrial storage containers \204 dimensional reference) /Trapped /False
 >>
 endobj
@@ -125,10 +125,10 @@ endobj
 endobj
 17 0 obj
 <<
-/Filter [ /ASCII85Decode /FlateDecode ] /Length 1240
+/Filter [ /ASCII85Decode /FlateDecode ] /Length 1244
 >>
 stream
-Gat=)gQ(#H&:O:SbZimGVCCfEDn0\:[[R8d(b#gaKpHD/W?c4MC*!'74/=H2kcX5g@Fu>Q1P^a,3=LGt-h+l>$h/<Al^n4a(i4@,6mRB/*SbNJ%u]B,R4sfb/B<N&+AkTqN*G(%lO]U-*Yp#/6(I"$JqU"("GD?/(:[^*;8CF[gn"O>h"Dn6RkK9Zb/%13Glu&9bprgKl7A9md,mjNI"TZo8+HQ[$c_<[U**6F"sf)$S2)3A`>??h.O73@EOg&7R#TVEGlsmZ7;&F]OHC;?Tg`%=)n6oqg8aVY]EW7*05=@e)HkA,!q/bVqYgs%HFJ/#o9b7XRH<m.f^Vc-!%c>sO>u6j$_rqs&7kmaZ93b>OPj"EfY'UVpGr%Xih(?;q%5cNP:R%15D`9!TdM9ilT08aao?r'nXM7_p[A.<c*o?Y'J6IsFR%adEF[(1B5_5SDCc56q3RJ8AEFtefDmYW@g\."RHMQ'G.hsN8/cfeYG*P4L.3(3]?7oie.Oj^etTiEklcMN@&I"_'D1Ln%*/np/_>IZHf83a`!MTLnaF$M(ocUlMXnoU;\5]T=j_?1dS'@D:AdX957#If[o]i4JEtiIeVSMKU'=nZ/&7?mD/F3/f'@X\.a7RG(P3?9?"*jDAdTV@.2o;sQCqsC-c&q[1VB02s)M.9?#h;#-OeVT3O[p/Gl'SF%\<DW:&"n,h\IK^1)@kpZBKZI0uY%*r*_ln%/Y%Og[f[JWduhdl(+7?H8PJdSJhBP2#>%Y)?"k<qY?TurH^<K\V9n3pQotS8n/Kg@=I_jM-)_t]^-hNa/liabfTB-$b^k9*#^@)joG=\b<HgThlY7#cd1_G@XV&Tm'.-fiH,op/I_NF>Q::ip2#KdFqJO$T[clh*qs+$)U[IR`_m$s(3K?\(^J62]KjUI=,'(['lIPthOumbK3VHb?0upd@$EY-3NnR1/8EsD$B$/:V=i3-#CjiWpTj1sQ:?!F0Qo*;k7e-e?4j\97d.[8?:]E^iaHV:TN&m\q65CqKAkQS9Kj:Lk3Pr&kiI1cXnLRrdmg%"a\mXdI]JA#GQN=Jn0j8a1iiO-%!2:&C@BpH\_=58Tp3+OboW1C'V5k/=(CqEFaN=,T9sLiFEmu*-Y+U*iFp4m^@ZR=1@#G!%pK`aX;IJGK>;CHCfK=j)I@,$ShpNA"L&<?HeNTJI5m"&^d%1p;P9AsEEeLdYr'.;80sqI,(igthuQZbYd*p"nBX57ibu5URZI~>endstream
+Gat=)gQ(#H&:O:SbZimGVCCfEDn0\:[[R8d(b#gaKpHD/W?c4MC*!'74/=H2kcX5g@Fu>Q1P^a,3=LGt-h+l>$h/<Al^n4a(i4@,6mRB/*SbNJ%u]B,R4sfb/B<N&+AkTqN*G(%lO]U-*Yp#/6(I"$JqU"("GD?/(:[^*;8CF[gn"O>h"Dn6RkK9Zb/%13Glu&9bprgKl7A9md,mjNI"TZo8+HQ[$c_<[U**6F"sf)$S2)3A`>??h.O73@EOg&7R#TVEGlsmZ7;&F]OHC;?Tg`%=)n6oqg8aVY]EW7*05=@e)HkA,!q/bVqYgs%HFJ/#o9b7XRH<m.f^Vc-!%c>sO>u6j$_rqs&7kmaZ93b>OPj"EfY'UVpGr%Xih(?;q%5cNP:R%15D`9!TdM9ilT08aao?r'nXM7_p[A.<c*o?Y'J6IsFR%adEF[(1B5_5SDCc56q3RJ8AEFtefDmYW@g\."RHMQ'G.hsN8/cfeYG*P4L.3(3]?7oie.Oj^etTiEklcMN@&I"_'D1Ln%*/np/_>IZHf83a`!MTLnaF$M(ocUlMXnoU;\5]T=j_?1dS'@D:AdX957#If[o]i4J.Xl=Q`tJ0'CYcd%D!*PJ1'g>g>:VdfC_s?R-PbG"=_j3_upq$'L$V:1g1bJ6.;o2K!UnXGVos1jfG&bjA$Ic(p9]VCrLVfp32alq15(`r.<gE$^,*>$Y(=48\VKtiXC56YTPKOrA`NuGs$&r^mFZbc:i[M)Z@n*N.*o.rF!p0IQ\VJr6:1L4W<S?6N-6I90*lc0aY`O^Nbl//=[\dG*0"=<o"&DjER#F?G/Q5NKnp5!.NM\*t3to<bSDokONr(5,\MUfEe-h3fM#nL4.=KJ'Uu=[_i-X#dsubC8bm.q_2uKB^c7:W<4"G\pO^@KB57&+Q\;-_]cJr2mP=0cl;F>0!!^/p:P)n8f[;if>pQ"2/Y""71t=&HK`\-^Z:r4g%JZDUH0)+],.2_$3PIT#i$UKo\_kcUcg^-YdH;aWa`bk=MX+9n80Bs+,h(Yp8Ao%E^$@$qsM+2UJT3G.DR@H<Q0;I!C%EGPXZi8\UFj>3W3m(pMK\1m8oNKb$=RN&'I`U:PbjJ1&I!B4nP+;9K+<0]E-t)ZBNgX1ufT`qDrniFbf4:/IFC:$r5eJi&;0).W?gGYI"j:)M*29=9dGAm5fnaS3o<p+8/nfd*(IZX[htbRU/(O&l<&"_5UN*!2s/T=F5MlB:`Q%2jJEPM?~>endstream
 endobj
 18 0 obj
 <<
@@ -199,17 +199,17 @@ xref
 0000002366 00000 n 
 0000002712 00000 n 
 0000002817 00000 n 
-0000004149 00000 n 
-0000006558 00000 n 
-0000009814 00000 n 
-0000012748 00000 n 
-0000014585 00000 n 
-0000017019 00000 n 
-0000018990 00000 n 
+0000004153 00000 n 
+0000006562 00000 n 
+0000009818 00000 n 
+0000012752 00000 n 
+0000014589 00000 n 
+0000017023 00000 n 
+0000018994 00000 n 
 trailer
 <<
 /ID 
-[<7d3a6ca93c4be93f7e63ee35f0cc2b37><7d3a6ca93c4be93f7e63ee35f0cc2b37>]
+[<7997c94b3ba7047498a352f7b3d9d02e><7997c94b3ba7047498a352f7b3d9d02e>]
 % ReportLab generated PDF document -- digest (opensource)
 
 /Info 15 0 R
@@ -217,5 +217,5 @@ trailer
 /Size 25
 >>
 startxref
-21547
+21551
 %%EOF