failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- vibration
- ultrasound
- bushing capacitance
- dielecric frequency response (dfr)/ polarization and de-polarization current (pdc)/ recovery voltage method (rvm)
- noise


failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- ultrasound
- noise
- frequency response analysis (fra)
- vibration
- excitation current


failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- noise
- vibration
- ultrasound
- leak reactance flux
- frequency response analysis (fra)


failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- bushing capacitance
- vibration
- frequency response analysis (fra)
- noise
- ultrasound


failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- noise
- vibration
- excitation current
- ultrasound
- leak reactance flux


failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- noise
- excitation current
- vibration
- ultrasound
- bushing capacitance


failure_mode_sensor_analysis

Question: For power transformer, if core looseness occurs, which sensors among the choices are least likely to be relevant in identifying this failure?

Choices:
- bushing capacitance
- ultrasound
- leak reactance flux
- vibration
- noise


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor current exhibits an abnormal reading?

Choices:
- misalignment
- loss of input power phase
- stator windings fault
- unbalance
- brush(es) fault


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- brush(es) fault
- insulation deterioration
- rotor windings fault
- loss of input power phase
- stator windings fault


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- loss of input power phase
- eccentric rotor fault
- brush(es) fault
- rotor windings fault


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- loss of input power phase
- brush(es) fault
- rotor windings fault
- bearing damage


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- loss of input power phase
- unbalance
- rotor windings fault
- brush(es) fault
- insulation deterioration


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- misalignment
- brush(es) fault
- loss of input power phase
- rotor windings fault
- insulation deterioration


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- eccentric rotor fault
- stator windings fault
- loss of input power phase
- brush(es) fault
- insulation deterioration


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- loss of input power phase
- insulation deterioration
- stator windings fault
- brush(es) fault
- bearing damage


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- stator windings fault
- insulation deterioration
- loss of input power phase
- unbalance
- brush(es) fault


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- stator windings fault
- loss of input power phase
- brush(es) fault
- misalignment
- insulation deterioration


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- loss of input power phase
- brush(es) fault
- bearing damage
- eccentric rotor fault


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- brush(es) fault
- loss of input power phase
- eccentric rotor fault
- unbalance


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- brush(es) fault
- eccentric rotor fault
- loss of input power phase
- misalignment


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- bearing damage
- insulation deterioration
- loss of input power phase
- unbalance
- brush(es) fault


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- brush(es) fault
- loss of input power phase
- bearing damage
- misalignment


failure_mode_sensor_analysis

Question: For electric motor, what are the non-relevant failure events when the sensor voltage has an abnormal reading?

Choices:
- insulation deterioration
- brush(es) fault
- unbalance
- loss of input power phase
- misalignment


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- bearing damage
- stator windings fault
- rotor windings fault
- eccentric rotor fault
- brush(es) fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- brush(es) fault
- insulation deterioration
- stator windings fault
- bearing damage
- rotor windings fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- stator windings fault
- bearing damage
- rotor windings fault
- loss of input power phase
- brush(es) fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- unbalance
- brush(es) fault
- rotor windings fault
- stator windings fault
- bearing damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- bearing damage
- misalignment
- rotor windings fault
- brush(es) fault
- stator windings fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- brush(es) fault
- insulation deterioration
- eccentric rotor fault
- rotor windings fault
- bearing damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- eccentric rotor fault
- brush(es) fault
- rotor windings fault
- loss of input power phase
- bearing damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- eccentric rotor fault
- rotor windings fault
- bearing damage
- unbalance
- brush(es) fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- brush(es) fault
- rotor windings fault
- bearing damage
- eccentric rotor fault
- misalignment


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- loss of input power phase
- bearing damage
- rotor windings fault
- insulation deterioration
- brush(es) fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- brush(es) fault
- bearing damage
- unbalance
- rotor windings fault
- insulation deterioration


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- rotor windings fault
- brush(es) fault
- misalignment
- insulation deterioration
- bearing damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- unbalance
- brush(es) fault
- loss of input power phase
- bearing damage
- rotor windings fault


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- misalignment
- rotor windings fault
- brush(es) fault
- bearing damage
- loss of input power phase


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for electric motor if the sensor torque exhibits an abnormal reading?

Choices:
- bearing damage
- brush(es) fault
- rotor windings fault
- misalignment
- unbalance


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor vibration in electric motor, which failure events are not relevant?

Choices:
- brush(es) fault
- unbalance
- stator windings fault
- bearing damage
- insulation deterioration


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- rotor windings fault
- eccentric rotor fault
- insulation deterioration
- bearing damage
- brush(es) fault


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- stator windings fault
- loss of input power phase
- rotor windings fault
- bearing damage
- eccentric rotor fault


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- rotor windings fault
- eccentric rotor fault
- brush(es) fault
- bearing damage
- unbalance


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- eccentric rotor fault
- stator windings fault
- misalignment
- brush(es) fault
- bearing damage


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- loss of input power phase
- brush(es) fault
- stator windings fault
- bearing damage
- insulation deterioration


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- stator windings fault
- unbalance
- brush(es) fault
- rotor windings fault
- insulation deterioration


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- bearing damage
- brush(es) fault
- misalignment
- stator windings fault
- insulation deterioration


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- brush(es) fault
- unbalance
- stator windings fault
- loss of input power phase
- bearing damage


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- rotor windings fault
- loss of input power phase
- bearing damage
- stator windings fault
- misalignment


failure_mode_sensor_analysis

Question: In electric motor, which failure events are unimportant if the sensor temperature shows an abnormal reading?

Choices:
- rotor windings fault
- unbalance
- misalignment
- stator windings fault
- brush(es) fault


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- loss of input power phase
- brush(es) fault
- bearing damage
- eccentric rotor fault
- stator windings fault


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- brush(es) fault
- eccentric rotor fault
- loss of input power phase
- insulation deterioration
- stator windings fault


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- brush(es) fault
- eccentric rotor fault
- loss of input power phase
- stator windings fault
- unbalance


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- brush(es) fault
- eccentric rotor fault
- loss of input power phase
- rotor windings fault
- misalignment


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- loss of input power phase
- rotor windings fault
- stator windings fault
- insulation deterioration
- bearing damage


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- loss of input power phase
- rotor windings fault
- stator windings fault
- unbalance


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- eccentric rotor fault
- misalignment
- bearing damage
- rotor windings fault
- stator windings fault


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- unbalance
- insulation deterioration
- rotor windings fault
- loss of input power phase
- eccentric rotor fault


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- stator windings fault
- misalignment
- insulation deterioration
- loss of input power phase
- eccentric rotor fault


failure_mode_sensor_analysis

Question: When the sensor axial flux in electric motor displays an abnormal reading, which failure events are not applicable?

Choices:
- unbalance
- rotor windings fault
- stator windings fault
- misalignment
- eccentric rotor fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- stator windings fault
- eccentric rotor fault
- rotor windings fault
- insulation deterioration
- brush(es) fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- insulation deterioration
- bearing damage
- stator windings fault
- eccentric rotor fault
- rotor windings fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- stator windings fault
- eccentric rotor fault
- loss of input power phase
- insulation deterioration
- rotor windings fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- eccentric rotor fault
- stator windings fault
- rotor windings fault
- unbalance
- insulation deterioration


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- rotor windings fault
- misalignment
- insulation deterioration
- eccentric rotor fault
- stator windings fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- bearing damage
- rotor windings fault
- stator windings fault
- insulation deterioration
- brush(es) fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- stator windings fault
- insulation deterioration
- brush(es) fault
- rotor windings fault
- loss of input power phase


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- insulation deterioration
- stator windings fault
- brush(es) fault
- rotor windings fault
- unbalance


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- stator windings fault
- insulation deterioration
- brush(es) fault
- rotor windings fault
- misalignment


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- loss of input power phase
- insulation deterioration
- bearing damage
- rotor windings fault
- stator windings fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- unbalance
- insulation deterioration
- bearing damage
- rotor windings fault
- stator windings fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- misalignment
- insulation deterioration
- stator windings fault
- rotor windings fault
- bearing damage


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- loss of input power phase
- unbalance
- rotor windings fault
- stator windings fault
- insulation deterioration


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- insulation deterioration
- rotor windings fault
- misalignment
- loss of input power phase
- stator windings fault


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor cooling gas in electric motor, which failure events are not relevant?

Choices:
- stator windings fault
- rotor windings fault
- misalignment
- unbalance
- insulation deterioration


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor steam leakage registers an abnormal reading?

Choices:
- bearing damage
- eccentric rotor
- unbalance
- hogging or sagging rotor
- bearing wear


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor steam leakage registers an abnormal reading?

Choices:
- unequal expansion
- bearing damage
- damaged labyrinth
- misalignment
- eccentric rotor


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor steam leakage registers an abnormal reading?

Choices:
- eccentric rotor
- damaged labyrinth
- unbalance
- hogging or sagging rotor
- misalignment


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- damaged labyrinth
- unequal expansion
- bearing wear
- damaged rotor blade


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- bearing wear
- unequal expansion
- eccentric rotor
- damaged rotor blade


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- unequal expansion
- hogging or sagging rotor
- bearing wear
- damaged rotor blade


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- damaged rotor blade
- bearing wear
- unequal expansion
- unbalance


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- misalignment
- bearing damage
- damaged rotor blade
- unequal expansion
- bearing wear


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- unequal expansion
- bearing wear
- bearing damage
- eccentric rotor
- damaged labyrinth


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- damaged labyrinth
- unequal expansion
- hogging or sagging rotor
- bearing wear
- bearing damage


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing wear
- bearing damage
- unbalance
- unequal expansion
- damaged labyrinth


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- unequal expansion
- damaged labyrinth
- bearing damage
- bearing wear
- misalignment


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- eccentric rotor
- unequal expansion
- bearing wear
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- unequal expansion
- eccentric rotor
- unbalance
- bearing wear


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- eccentric rotor
- unequal expansion
- bearing wear
- misalignment


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- unequal expansion
- bearing wear
- bearing damage
- hogging or sagging rotor
- unbalance


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- hogging or sagging rotor
- unequal expansion
- misalignment
- bearing wear


failure_mode_sensor_analysis

Question: When the sensor length measurement in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- misalignment
- bearing wear
- unequal expansion
- unbalance


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- bearing wear
- bearing damage
- eccentric rotor
- damaged labyrinth


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- eccentric rotor
- bearing damage
- damaged labyrinth
- hogging or sagging rotor
- damaged rotor blade


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged labyrinth
- bearing damage
- unequal expansion
- damaged rotor blade
- eccentric rotor


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- bearing damage
- damaged labyrinth
- unbalance
- eccentric rotor
- damaged rotor blade


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- bearing damage
- misalignment
- damaged labyrinth
- eccentric rotor


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- bearing damage
- bearing wear
- damaged labyrinth
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- bearing damage
- unequal expansion
- bearing wear
- damaged labyrinth


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- damaged labyrinth
- bearing damage
- unbalance
- bearing wear


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- bearing damage
- misalignment
- bearing wear
- damaged labyrinth


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- unequal expansion
- damaged rotor blade
- bearing damage
- hogging or sagging rotor
- damaged labyrinth


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged labyrinth
- bearing damage
- damaged rotor blade
- unbalance
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- damaged labyrinth
- misalignment
- hogging or sagging rotor
- bearing damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- damaged rotor blade
- damaged labyrinth
- unequal expansion
- unbalance
- bearing damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- bearing damage
- damaged labyrinth
- misalignment
- unequal expansion
- damaged rotor blade


failure_mode_sensor_analysis

Question: Which failure events should be excluded for steam turbine when an abnormal reading is detected by the sensor power?

Choices:
- bearing damage
- unbalance
- damaged labyrinth
- damaged rotor blade
- misalignment


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor temperature in steam turbine, which failure events are not relevant?

Choices:
- hogging or sagging rotor
- unequal expansion
- bearing damage
- eccentric rotor
- bearing wear


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor temperature in steam turbine, which failure events are not relevant?

Choices:
- damaged rotor blade
- unbalance
- eccentric rotor
- bearing wear
- unequal expansion


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor temperature in steam turbine, which failure events are not relevant?

Choices:
- damaged rotor blade
- misalignment
- eccentric rotor
- damaged labyrinth
- unequal expansion


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor temperature in steam turbine, which failure events are not relevant?

Choices:
- unequal expansion
- unbalance
- bearing damage
- damaged rotor blade
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor temperature in steam turbine, which failure events are not relevant?

Choices:
- unequal expansion
- damaged rotor blade
- misalignment
- bearing wear
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: When an abnormal reading is detected by the sensor temperature in steam turbine, which failure events are not relevant?

Choices:
- misalignment
- unbalance
- unequal expansion
- bearing wear
- bearing damage


failure_mode_sensor_analysis

Question: When the sensor coast down time in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- damaged labyrinth
- bearing damage
- unequal expansion
- eccentric rotor
- unbalance


failure_mode_sensor_analysis

Question: When the sensor coast down time in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- unequal expansion
- hogging or sagging rotor
- bearing wear
- misalignment
- bearing damage


failure_mode_sensor_analysis

Question: When the sensor coast down time in steam turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing damage
- damaged rotor blade
- eccentric rotor
- misalignment
- unbalance


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- hogging or sagging rotor
- bearing wear
- damaged labyrinth
- bearing damage
- eccentric rotor


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- unequal expansion
- bearing wear
- damaged rotor blade
- damaged labyrinth
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- damaged labyrinth
- unbalance
- damaged rotor blade
- bearing damage
- bearing wear


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- bearing damage
- misalignment
- damaged labyrinth
- damaged rotor blade
- hogging or sagging rotor


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- hogging or sagging rotor
- eccentric rotor
- bearing wear
- unequal expansion
- damaged rotor blade


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- eccentric rotor
- unbalance
- damaged rotor blade
- bearing damage
- bearing wear


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- hogging or sagging rotor
- bearing damage
- misalignment
- eccentric rotor
- bearing wear


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- damaged rotor blade
- hogging or sagging rotor
- bearing wear
- unequal expansion
- unbalance


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- bearing damage
- unequal expansion
- misalignment
- hogging or sagging rotor
- damaged rotor blade


failure_mode_sensor_analysis

Question: For steam turbine, which failure events are not pertinent if the sensor oil debris registers an abnormal reading?

Choices:
- hogging or sagging rotor
- unbalance
- damaged rotor blade
- misalignment
- bearing damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine dirty
- power turbine damage
- compressor fouled
- compressor stall
- fuel filter blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine dirty
- power turbine damage
- compressor stall
- seal leakage
- air inlet blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor fouled
- combustion chamber holed
- air inlet blockage
- compressor stall
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine dirty
- power turbine damage
- compressor stall
- compressor damaged
- burner blocked


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- bearing wear/ damage
- compressor damaged
- air inlet blockage
- compressor stall
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine dirty
- power turbine damage
- gear defects
- compressor fouled
- compressor stall


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor stall
- power turbine dirty
- compressor fouled
- unbalance
- air inlet blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor stall
- misalignment
- power turbine dirty
- power turbine damage
- air inlet blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor damaged
- fuel filter blockage
- power turbine dirty
- seal leakage
- air inlet blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor fouled
- compressor damaged
- power turbine dirty
- combustion chamber holed
- fuel filter blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- air inlet blockage
- power turbine dirty
- power turbine damage
- fuel filter blockage
- burner blocked


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- air inlet blockage
- power turbine dirty
- bearing wear/ damage
- fuel filter blockage
- compressor fouled


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine damage
- gear defects
- fuel filter blockage
- power turbine dirty
- air inlet blockage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- unbalance
- fuel filter blockage
- power turbine dirty
- power turbine damage
- compressor damaged


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- misalignment
- fuel filter blockage
- compressor damaged
- power turbine damage
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- combustion chamber holed
- compressor damaged
- seal leakage
- power turbine damage
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor damaged
- power turbine damage
- seal leakage
- air inlet blockage
- burner blocked


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- bearing wear/ damage
- seal leakage
- power turbine damage
- compressor damaged
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor fouled
- power turbine damage
- seal leakage
- air inlet blockage
- gear defects


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine damage
- unbalance
- power turbine dirty
- seal leakage
- compressor fouled


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- misalignment
- compressor damaged
- power turbine dirty
- compressor fouled
- seal leakage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- air inlet blockage
- combustion chamber holed
- burner blocked
- power turbine damage
- compressor damaged


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- bearing wear/ damage
- combustion chamber holed
- power turbine damage
- compressor damaged
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor damaged
- combustion chamber holed
- compressor fouled
- gear defects
- power turbine damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- combustion chamber holed
- power turbine dirty
- air inlet blockage
- unbalance
- compressor fouled


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- combustion chamber holed
- power turbine dirty
- power turbine damage
- compressor damaged
- misalignment


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- bearing wear/ damage
- power turbine dirty
- air inlet blockage
- compressor fouled
- burner blocked


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- burner blocked
- gear defects
- power turbine dirty
- air inlet blockage
- power turbine damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor damaged
- air inlet blockage
- burner blocked
- compressor fouled
- unbalance


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- air inlet blockage
- burner blocked
- power turbine damage
- misalignment
- power turbine dirty


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor damaged
- air inlet blockage
- gear defects
- bearing wear/ damage
- power turbine damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor fouled
- power turbine damage
- compressor damaged
- unbalance
- bearing wear/ damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- air inlet blockage
- compressor damaged
- bearing wear/ damage
- misalignment
- power turbine damage


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- gear defects
- power turbine damage
- compressor damaged
- power turbine dirty
- unbalance


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- compressor damaged
- power turbine dirty
- power turbine damage
- gear defects
- misalignment


failure_mode_sensor_analysis

Question: What are the irrelevant failure events for aero gas turbine if the sensor compressor temperature exhibits an abnormal reading?

Choices:
- power turbine damage
- air inlet blockage
- compressor damaged
- misalignment
- unbalance


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine dirty
- seal leakage
- compressor stall
- compressor damaged
- power turbine damage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine damage
- compressor fouled
- compressor damaged
- combustion chamber holed
- compressor stall


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- burner blocked
- power turbine damage
- compressor fouled
- compressor damaged
- compressor stall


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- fuel filter blockage
- bearing wear/ damage
- compressor fouled
- compressor stall
- power turbine damage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- compressor stall
- power turbine damage
- gear defects
- compressor fouled


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- compressor stall
- compressor damaged
- fuel filter blockage
- compressor fouled
- unbalance


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- misalignment
- fuel filter blockage
- compressor stall
- power turbine damage
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- fuel filter blockage
- combustion chamber holed
- power turbine dirty
- seal leakage
- power turbine damage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- seal leakage
- power turbine damage
- burner blocked
- air inlet blockage
- power turbine dirty


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- seal leakage
- power turbine dirty
- fuel filter blockage
- bearing wear/ damage
- compressor fouled


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- compressor fouled
- compressor damaged
- fuel filter blockage
- seal leakage
- gear defects


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine damage
- seal leakage
- unbalance
- compressor fouled
- power turbine dirty


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine damage
- misalignment
- compressor fouled
- compressor damaged
- seal leakage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- compressor damaged
- fuel filter blockage
- burner blocked
- power turbine damage
- combustion chamber holed


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing wear/ damage
- air inlet blockage
- power turbine dirty
- fuel filter blockage
- combustion chamber holed


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- gear defects
- combustion chamber holed
- compressor damaged
- power turbine damage
- compressor fouled


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- compressor damaged
- fuel filter blockage
- combustion chamber holed
- unbalance


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- combustion chamber holed
- air inlet blockage
- power turbine damage
- misalignment
- fuel filter blockage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing wear/ damage
- compressor damaged
- burner blocked
- power turbine dirty
- fuel filter blockage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- compressor fouled
- burner blocked
- air inlet blockage
- gear defects
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- unbalance
- compressor damaged
- power turbine dirty
- air inlet blockage
- burner blocked


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- fuel filter blockage
- air inlet blockage
- misalignment
- burner blocked
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- bearing wear/ damage
- compressor fouled
- power turbine dirty
- compressor damaged
- gear defects


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine dirty
- bearing wear/ damage
- power turbine damage
- unbalance
- compressor fouled


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- compressor damaged
- power turbine dirty
- misalignment
- power turbine damage
- bearing wear/ damage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine damage
- gear defects
- compressor damaged
- unbalance
- air inlet blockage


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- misalignment
- gear defects
- compressor fouled
- power turbine dirty


failure_mode_sensor_analysis

Question: When the sensor compresor pressure/ pressure ratio in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- unbalance
- compressor fouled
- power turbine dirty
- power turbine damage
- misalignment


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- compressor stall
- power turbine damage
- compressor damaged
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- fuel filter blockage
- compressor damaged
- compressor fouled
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- compressor damaged
- power turbine damage
- seal leakage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor damaged
- air inlet blockage
- power turbine damage
- combustion chamber holed
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- burner blocked
- compressor fouled
- air inlet blockage
- power turbine dirty
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- compressor damaged
- power turbine damage
- bearing wear/ damage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- compressor damaged
- power turbine dirty
- power turbine damage
- gear defects


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- unbalance
- power turbine damage
- compressor fouled
- compressor damaged
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- compressor damaged
- air inlet blockage
- misalignment
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- power turbine dirty
- fuel filter blockage
- compressor stall
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- seal leakage
- compressor fouled
- power turbine dirty
- air inlet blockage
- compressor stall


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- combustion chamber holed
- compressor stall
- compressor fouled
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine damage
- power turbine dirty
- compressor stall
- burner blocked
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor stall
- power turbine damage
- bearing wear/ damage
- power turbine dirty
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- gear defects
- compressor fouled
- power turbine dirty
- compressor stall
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- power turbine dirty
- power turbine damage
- unbalance
- compressor stall


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- misalignment
- air inlet blockage
- power turbine damage
- compressor stall
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- power turbine damage
- seal leakage
- fuel filter blockage
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- fuel filter blockage
- power turbine damage
- compressor fouled
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- fuel filter blockage
- power turbine dirty
- compressor fouled
- burner blocked
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- power turbine damage
- bearing wear/ damage
- fuel filter blockage
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- gear defects
- power turbine dirty
- air inlet blockage
- fuel filter blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- power turbine dirty
- compressor fouled
- fuel filter blockage
- unbalance


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- misalignment
- fuel filter blockage
- compressor fouled
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine damage
- air inlet blockage
- seal leakage
- compressor fouled
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- seal leakage
- air inlet blockage
- power turbine damage
- burner blocked
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- compressor fouled
- seal leakage
- bearing wear/ damage
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- seal leakage
- power turbine dirty
- gear defects
- compressor fouled
- air inlet blockage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- air inlet blockage
- unbalance
- seal leakage
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- misalignment
- seal leakage
- air inlet blockage
- power turbine dirty
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- combustion chamber holed
- compressor fouled
- power turbine damage
- power turbine dirty
- burner blocked


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- bearing wear/ damage
- compressor fouled
- combustion chamber holed
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- power turbine dirty
- combustion chamber holed
- gear defects
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- unbalance
- combustion chamber holed
- power turbine dirty
- air inlet blockage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- combustion chamber holed
- power turbine dirty
- misalignment
- compressor fouled
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine damage
- burner blocked
- bearing wear/ damage
- air inlet blockage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- gear defects
- burner blocked
- power turbine damage
- air inlet blockage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine dirty
- burner blocked
- compressor fouled
- air inlet blockage
- unbalance


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- misalignment
- compressor fouled
- air inlet blockage
- power turbine dirty
- burner blocked


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- power turbine damage
- air inlet blockage
- compressor fouled
- gear defects
- bearing wear/ damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- air inlet blockage
- unbalance
- bearing wear/ damage
- power turbine damage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- bearing wear/ damage
- misalignment
- power turbine dirty
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- unbalance
- air inlet blockage
- gear defects
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- gear defects
- air inlet blockage
- misalignment
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events are irrelevant for aero gas turbine if there is an abnormal reading from the sensor air flow?

Choices:
- compressor fouled
- misalignment
- power turbine damage
- unbalance
- air inlet blockage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- air inlet blockage
- compressor stall
- burner blocked
- fuel filter blockage
- combustion chamber holed


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- burner blocked
- seal leakage
- combustion chamber holed
- compressor fouled
- air inlet blockage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- fuel filter blockage
- burner blocked
- compressor fouled
- air inlet blockage
- power turbine dirty


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- power turbine damage
- compressor damaged
- compressor fouled
- air inlet blockage
- fuel filter blockage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- air inlet blockage
- compressor fouled
- combustion chamber holed
- burner blocked
- bearing wear/ damage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- gear defects
- burner blocked
- compressor damaged
- air inlet blockage
- combustion chamber holed


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- burner blocked
- air inlet blockage
- combustion chamber holed
- compressor damaged
- unbalance


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- air inlet blockage
- burner blocked
- compressor damaged
- combustion chamber holed
- misalignment


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor fouled
- burner blocked
- seal leakage
- combustion chamber holed
- compressor stall


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- fuel filter blockage
- compressor stall
- power turbine dirty
- compressor damaged
- combustion chamber holed


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor stall
- burner blocked
- power turbine damage
- fuel filter blockage
- compressor damaged


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- combustion chamber holed
- bearing wear/ damage
- compressor stall
- compressor damaged
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- fuel filter blockage
- compressor stall
- compressor fouled
- gear defects
- burner blocked


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor fouled
- combustion chamber holed
- compressor damaged
- compressor stall
- unbalance


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor damaged
- misalignment
- compressor stall
- compressor fouled
- combustion chamber holed


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- power turbine dirty
- compressor damaged
- combustion chamber holed
- fuel filter blockage
- seal leakage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- power turbine damage
- combustion chamber holed
- burner blocked
- seal leakage
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- bearing wear/ damage
- combustion chamber holed
- burner blocked
- fuel filter blockage
- seal leakage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- gear defects
- fuel filter blockage
- compressor damaged
- burner blocked
- seal leakage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- burner blocked
- compressor damaged
- fuel filter blockage
- unbalance
- seal leakage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- burner blocked
- misalignment
- compressor damaged
- seal leakage
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor damaged
- power turbine damage
- fuel filter blockage
- power turbine dirty
- burner blocked


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- combustion chamber holed
- burner blocked
- power turbine dirty
- bearing wear/ damage
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- gear defects
- combustion chamber holed
- burner blocked
- power turbine dirty
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- unbalance
- compressor damaged
- combustion chamber holed
- power turbine dirty
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- misalignment
- compressor damaged
- fuel filter blockage
- combustion chamber holed
- power turbine dirty


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- burner blocked
- bearing wear/ damage
- combustion chamber holed
- power turbine damage
- fuel filter blockage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor fouled
- combustion chamber holed
- power turbine damage
- gear defects
- fuel filter blockage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor damaged
- power turbine damage
- unbalance
- combustion chamber holed
- burner blocked


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- power turbine damage
- compressor damaged
- burner blocked
- misalignment
- compressor fouled


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- bearing wear/ damage
- gear defects
- compressor damaged
- combustion chamber holed
- fuel filter blockage


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- bearing wear/ damage
- burner blocked
- unbalance
- combustion chamber holed
- compressor damaged


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- compressor damaged
- bearing wear/ damage
- misalignment
- fuel filter blockage
- burner blocked


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- gear defects
- unbalance
- fuel filter blockage
- compressor damaged
- combustion chamber holed


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- misalignment
- gear defects
- compressor fouled
- compressor damaged
- burner blocked


failure_mode_sensor_analysis

Question: In aero gas turbine, which failure events are unimportant if the sensor fuel pressure/ fuel flow shows an abnormal reading?

Choices:
- misalignment
- compressor fouled
- fuel filter blockage
- unbalance
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- fuel filter blockage
- burner blocked
- seal leakage
- compressor stall
- bearing wear/ damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- seal leakage
- compressor damaged
- power turbine damage
- gear defects
- burner blocked


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- seal leakage
- air inlet blockage
- compressor damaged
- unbalance
- burner blocked


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- compressor fouled
- seal leakage
- fuel filter blockage
- power turbine dirty
- misalignment


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- gear defects
- power turbine damage
- compressor damaged
- bearing wear/ damage
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- air inlet blockage
- burner blocked
- bearing wear/ damage
- unbalance
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- power turbine dirty
- misalignment
- compressor damaged
- burner blocked
- bearing wear/ damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- unbalance
- fuel filter blockage
- power turbine dirty
- compressor fouled
- gear defects


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- misalignment
- gear defects
- compressor damaged
- power turbine damage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor speed?

Choices:
- burner blocked
- misalignment
- fuel filter blockage
- compressor stall
- unbalance


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor stall
- compressor damaged
- air inlet blockage
- compressor fouled
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- fuel filter blockage
- air inlet blockage
- seal leakage
- compressor fouled
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- air inlet blockage
- compressor fouled
- compressor damaged
- combustion chamber holed
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- burner blocked
- seal leakage
- air inlet blockage
- compressor damaged
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- compressor fouled
- air inlet blockage
- seal leakage
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor fouled
- power turbine damage
- seal leakage
- air inlet blockage
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- air inlet blockage
- bearing wear/ damage
- seal leakage
- compressor fouled
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- seal leakage
- air inlet blockage
- gear defects
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- seal leakage
- air inlet blockage
- compressor fouled
- unbalance


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- compressor damaged
- misalignment
- air inlet blockage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor stall
- seal leakage
- compressor damaged
- compressor fouled
- fuel filter blockage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- compressor stall
- compressor damaged
- compressor fouled
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor fouled
- seal leakage
- compressor damaged
- burner blocked
- compressor stall


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- power turbine dirty
- compressor damaged
- seal leakage
- compressor fouled
- compressor stall


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- compressor fouled
- compressor stall
- power turbine damage
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- compressor stall
- compressor damaged
- compressor fouled
- bearing wear/ damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- compressor damaged
- compressor fouled
- gear defects
- compressor stall


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- unbalance
- compressor fouled
- compressor stall
- seal leakage
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor stall
- compressor damaged
- seal leakage
- compressor fouled
- misalignment


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor fouled
- seal leakage
- compressor damaged
- combustion chamber holed
- fuel filter blockage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- burner blocked
- compressor fouled
- fuel filter blockage
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- power turbine dirty
- fuel filter blockage
- compressor fouled
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- power turbine damage
- compressor fouled
- fuel filter blockage
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- fuel filter blockage
- seal leakage
- compressor damaged
- bearing wear/ damage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- fuel filter blockage
- compressor fouled
- gear defects
- seal leakage
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- unbalance
- compressor fouled
- seal leakage
- fuel filter blockage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor fouled
- compressor damaged
- fuel filter blockage
- seal leakage
- misalignment


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- burner blocked
- compressor damaged
- compressor fouled
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- power turbine dirty
- seal leakage
- compressor fouled
- combustion chamber holed
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- power turbine damage
- seal leakage
- compressor fouled
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- seal leakage
- bearing wear/ damage
- combustion chamber holed
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- compressor fouled
- gear defects
- seal leakage
- combustion chamber holed


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- unbalance
- combustion chamber holed
- compressor damaged
- seal leakage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- compressor fouled
- misalignment
- combustion chamber holed
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- burner blocked
- compressor fouled
- power turbine dirty
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor damaged
- power turbine damage
- compressor fouled
- burner blocked
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- burner blocked
- compressor damaged
- seal leakage
- bearing wear/ damage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- compressor fouled
- burner blocked
- gear defects
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- burner blocked
- seal leakage
- compressor fouled
- unbalance
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- burner blocked
- seal leakage
- compressor damaged
- misalignment
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- power turbine dirty
- compressor damaged
- compressor fouled
- power turbine damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- bearing wear/ damage
- compressor damaged
- power turbine dirty
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- power turbine dirty
- compressor fouled
- gear defects
- seal leakage
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- unbalance
- compressor fouled
- compressor damaged
- seal leakage
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- misalignment
- compressor damaged
- compressor fouled
- seal leakage
- power turbine dirty


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor fouled
- power turbine damage
- compressor damaged
- seal leakage
- bearing wear/ damage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- power turbine damage
- compressor damaged
- gear defects
- seal leakage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- unbalance
- compressor damaged
- seal leakage
- power turbine damage
- compressor fouled


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- misalignment
- seal leakage
- compressor fouled
- power turbine damage
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- gear defects
- bearing wear/ damage
- compressor fouled
- seal leakage
- compressor damaged


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- unbalance
- compressor fouled
- bearing wear/ damage
- compressor damaged
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- bearing wear/ damage
- compressor damaged
- compressor fouled
- seal leakage
- misalignment


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- gear defects
- compressor damaged
- unbalance
- compressor fouled
- seal leakage


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- seal leakage
- compressor fouled
- compressor damaged
- misalignment
- gear defects


failure_mode_sensor_analysis

Question: Which failure events should be excluded for aero gas turbine when an abnormal reading is detected by the sensor gas generator temperature?

Choices:
- compressor fouled
- unbalance
- compressor damaged
- misalignment
- seal leakage


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- air inlet blockage
- combustion chamber holed
- seal leakage
- fuel filter blockage
- compressor stall


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- air inlet blockage
- power turbine damage
- bearing wear/ damage
- burner blocked
- power turbine dirty


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- air inlet blockage
- compressor damaged
- gear defects
- power turbine dirty
- fuel filter blockage


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- compressor stall
- air inlet blockage
- fuel filter blockage
- compressor damaged
- unbalance


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- compressor stall
- misalignment
- air inlet blockage
- power turbine dirty
- burner blocked


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- compressor damaged
- fuel filter blockage
- bearing wear/ damage
- combustion chamber holed
- power turbine damage


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- combustion chamber holed
- seal leakage
- power turbine dirty
- gear defects
- fuel filter blockage


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- unbalance
- fuel filter blockage
- combustion chamber holed
- power turbine damage
- compressor fouled


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- fuel filter blockage
- misalignment
- combustion chamber holed
- seal leakage
- compressor damaged


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- seal leakage
- compressor fouled
- power turbine dirty
- bearing wear/ damage
- gear defects


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- unbalance
- power turbine dirty
- bearing wear/ damage
- burner blocked
- compressor damaged


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- burner blocked
- bearing wear/ damage
- power turbine damage
- compressor damaged
- misalignment


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- compressor damaged
- power turbine dirty
- gear defects
- burner blocked
- unbalance


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- gear defects
- misalignment
- burner blocked
- compressor damaged
- power turbine dirty


failure_mode_sensor_analysis

Question: In the context of aero gas turbine, which failure events are not relevant when the sensor pressure/ pressure ratio shows an abnormal reading?

Choices:
- burner blocked
- fuel filter blockage
- power turbine dirty
- unbalance
- misalignment


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- compressor damaged
- power turbine dirty
- compressor fouled
- compressor stall


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- fuel filter blockage
- power turbine dirty
- air inlet blockage
- compressor fouled
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- seal leakage
- air inlet blockage
- compressor fouled
- compressor damaged
- power turbine dirty


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- compressor fouled
- combustion chamber holed
- power turbine dirty
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- power turbine dirty
- burner blocked
- air inlet blockage
- compressor fouled
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- power turbine dirty
- power turbine damage
- compressor fouled
- compressor damaged


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- compressor damaged
- bearing wear/ damage
- power turbine dirty
- compressor fouled
- air inlet blockage


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- gear defects
- compressor damaged
- power turbine dirty
- air inlet blockage
- compressor fouled


failure_mode_sensor_analysis

Question: When the sensor power turbine temperature in aero gas turbine displays an abnormal reading, which failure events are not applicable?

Choices:
- air inlet blockage
- unbalance
- compressor fouled
- power turbine dirty
- compressor damaged