Daily Papers

Autoregressive learning of time-stepping operators provides an effective approach to data-driven partial differential equation (PDE) simulation, yet for conservation laws, they face a fundamental challenge: learned updates may violate global conservation over long rollouts. For the important subclass of mass-conservation-type equations, the problem is compounded by inherent physical bounds (e.g., nonnegativity or concentrations in [0,1]) whose violation further destabilizes predictions. We introduce FluxNet, which learns cumulative transport amounts representing the total conserved quantity redistributed between each cell and a configurable neighborhood over the full surrogate interval. A conservative update guarantees exact discrete conservation by construction; modular capacity-constrained transport heads (L, U, and D) enforce lower bounds, upper bounds, or near-zero dual-bound violations through architectural design. Unlike flux-rate surrogates that require temporal integration and thus inherit CFL constraints, FluxNet involves no such integration; configurable transport neighborhoods enable large-timestep prediction at full spatial resolution. Ghost cells extend the framework to non-periodic boundaries. Experiments on four benchmarks (1D convection--diffusion, 2D shallow water, 1D traffic flow, 2D Cahn--Hilliard) demonstrate exact conservation, structural bound preservation, architecture modularity, and superior stability over flux-rate surrogates at large temporal strides. The code is publicly available at: https://github.com/Lan-zs/FluxNet.

Neural surrogates promise large speedups over classical solvers for physical dynamics but fail silently at sharp dynamical events such as shocks, fronts, and contact. We present hybrid neural world models for physical dynamics: a recipe for training and deploying multi-horizon surrogates in physical state space, where a single network with continuous horizon conditioning is trained with direct supervision against textbook reference solvers to predict any future state at horizon T in one forward pass. Although no part of the training data, loss function, or architecture supervises discontinuity location, the trained surrogate encodes it implicitly, recoverable from its forward passes alone as a per-trajectory error map that concentrates on shocks, fronts, and contacts, and stays small elsewhere. The map is competitive with or better than standard label-free baselines including deep ensembles, learned error heads, gradient-magnitude indicators, and locally-adaptive conformal prediction, while using only a single trained network and requiring no calibration set or governing-equation knowledge. The recipe supports two operating points. Mode 1 runs the surrogate alone for maximum throughput, with same-hardware CPU speedups of 26x to 72x against textbook solvers on the PDE environments. Mode 2 uses the error map to gate a reference-solver fallback, deferring uncertain trajectories and roughly halving the surrogate's residual error at the default operating point. The recipe applies without modification across reaction-diffusion, compressible Euler, and rigid-body collision dynamics.

Fast, geometry-generalizing surrogates for unsteady flow remain challenging. We present a time-dependent, geometry-aware Deep Operator Network that predicts velocity fields for moderate-Re flows around parametric and non-parametric shapes. The model encodes geometry via a signed distance field (SDF) trunk and flow history via a CNN branch, trained on 841 high-fidelity simulations. On held-out shapes, it attains sim 5% relative L2 single-step error and up to 1000X speedups over CFD. We provide physics-centric rollout diagnostics, including phase error at probes and divergence norms, to quantify long-horizon fidelity. These reveal accurate near-term transients but error accumulation in fine-scale wakes, most pronounced for sharp-cornered geometries. We analyze failure modes and outline practical mitigations. Code, splits, and scripts are openly released at: https://github.com/baskargroup/TimeDependent-DeepONet to support reproducibility and benchmarking.

Numerical simulations in climate, chemistry, or astrophysics are computationally too expensive for uncertainty quantification or parameter-exploration at high-resolution. Reduced-order or surrogate models are multiple orders of magnitude faster, but traditional surrogates are inflexible or inaccurate and pure machine learning (ML)-based surrogates too data-hungry. We propose a hybrid, flexible surrogate model that exploits known physics for simulating large-scale dynamics and limits learning to the hard-to-model term, which is called parametrization or closure and captures the effect of fine- onto large-scale dynamics. Leveraging neural operators, we are the first to learn grid-independent, non-local, and flexible parametrizations. Our multiscale neural operator is motivated by a rich literature in multiscale modeling, has quasilinear runtime complexity, is more accurate or flexible than state-of-the-art parametrizations and demonstrated on the chaotic equation multiscale Lorenz96.

This paper introduces a novel surrogate modeling framework for aerodynamic applications based on Neural Fields. The proposed approach, MARIO (Modulated Aerodynamic Resolution Invariant Operator), addresses non parametric geometric variability through an efficient shape encoding mechanism and exploits the discretization-invariant nature of Neural Fields. It enables training on significantly downsampled meshes, while maintaining consistent accuracy during full-resolution inference. These properties allow for efficient modeling of diverse flow conditions, while reducing computational cost and memory requirements compared to traditional CFD solvers and existing surrogate methods. The framework is validated on two complementary datasets that reflect industrial constraints. First, the AirfRANS dataset consists in a two-dimensional airfoil benchmark with non-parametric shape variations. Performance evaluation of MARIO on this case demonstrates an order of magnitude improvement in prediction accuracy over existing methods across velocity, pressure, and turbulent viscosity fields, while accurately capturing boundary layer phenomena and aerodynamic coefficients. Second, the NASA Common Research Model features three-dimensional pressure distributions on a full aircraft surface mesh, with parametric control surface deflections. This configuration confirms MARIO's accuracy and scalability. Benchmarking against state-of-the-art methods demonstrates that Neural Field surrogates can provide rapid and accurate aerodynamic predictions under the computational and data limitations characteristic of industrial applications.

Neural surrogates offer a promising route to accelerating computationally expensive simulations governed by partial differential equations across science and industry. Their practical deployment, however, is limited by unreliable predictions under out-of-distribution (OOD) conditions. We develop a solver-coupled surrogate-Newton framework that uses surrogate predictions as high-quality initial guesses for Newton-Krylov iterations, thereby combining rapid global flow-field prediction with high-accuracy numerical convergence at the terminal stage. On an OOD benchmark comprising geometries sampled from actual transonic airfoil optimization trajectories, the framework lowers the median residual L_2 ratio by over seven orders of magnitude while substantially reducing field and aerodynamic errors. In practical supercritical airfoil optimization, it improves online prediction reliability while achieving a 15.5-fold generation-level speedup over CFD. We further test the framework's extension to three dimensions using a flying-wing dataset. Together, these studies demonstrate the potential of surrogate-Newton coupling to deliver accurate, efficient and scalable steady CFD across industrial workflows.

The aim of this study is to develop surrogate models for quick, accurate prediction of thrust forces generated through flapping fin propulsion for given operating conditions and fin geometries. Different network architectures and configurations are explored to model the training data separately for the lead fin and rear fin of a tandem fin setup. We progressively improve the data representation of the input parameter space for model predictions. The models are tested on three unseen fin geometries and the predictions validated with computational fluid dynamics (CFD) data. Finally, the orders of magnitude gains in computational performance of these surrogate models, compared to experimental and CFD runs, vs their tradeoff with accuracy is discussed within the context of this tandem fin configuration.

Offline optimization is an important task in numerous material engineering domains where online experimentation to collect data is too expensive and needs to be replaced by an in silico maximization of a surrogate of the black-box function. Although such a surrogate can be learned from offline data, its prediction might not be reliable outside the offline data regime, which happens when the surrogate has narrow prediction margin and is (therefore) sensitive to small perturbations of its parameterization. This raises the following questions: (1) how to regulate the sensitivity of a surrogate model; and (2) whether conditioning an offline optimizer with such less sensitive surrogate will lead to better optimization performance. To address these questions, we develop an optimizable sensitivity measurement for the surrogate model, which then inspires a sensitivity-informed regularizer that is applicable to a wide range of offline optimizers. This development is both orthogonal and synergistic to prior research on offline optimization, which is demonstrated in our extensive experiment benchmark.

Neural surrogates for partial differential equations (PDEs) have become popular due to their potential to quickly simulate physics. With a few exceptions, neural surrogates generally treat the forward evolution of time-dependent PDEs as a black box by directly predicting the next state. While this is a natural and easy framework for applying neural surrogates, it can be an over-simplified and rigid framework for predicting physics. In this work, we propose an alternative framework in which neural solvers predict the temporal derivative and an ODE integrator forwards the solution in time, which has little overhead and is broadly applicable across model architectures and PDEs. We find that by simply changing the training target and introducing numerical integration during inference, neural surrogates can gain accuracy and stability. Predicting temporal derivatives also allows models to not be constrained to a specific temporal discretization, allowing for flexible time-stepping during inference or training on higher-resolution PDE data. Lastly, we investigate why this new framework can be beneficial and in what situations does it work well.

The lack of freely available standardized datasets represents an aggravating factor during the development and testing the performance of novel computational techniques in exposure assessment and dosimetry research. This hinders progress as researchers are required to generate numerical data (field, power and temperature distribution) anew using simulation software for each exposure scenario. Other than being time consuming, this approach is highly susceptible to errors that occur during the configuration of the electromagnetic model. To address this issue, in this paper, the limited available data on the incident power density and resultant maximum temperature rise on the skin surface considering various steady-state exposure scenarios at 10-90 GHz have been statistically modeled. The synthetic data have been sampled from the fitted statistical multivariate distribution with respect to predetermined dosimetric constraints. We thus present a comprehensive and open-source dataset compiled of the high-fidelity numerical data considering various exposures to a realistic source. Furthermore, different surrogate models for predicting maximum temperature rise on the skin surface were fitted based on the synthetic dataset. All surrogate models were tested on the originally available data where satisfactory predictive performance has been demonstrated. A simple technique of combining quadratic polynomial and tensor-product spline surrogates, each operating on its own cluster of data, has achieved the lowest mean absolute error of 0.058 {\deg}C. Therefore, overall experimental results indicate the validity of the proposed synthetic dataset.

Modern power systems require fast and accurate dynamic simulations for stability assessment, digital twins, and real-time control, but classical ODE solvers are often too slow for large-scale or online applications. We propose a neural-operator framework for surrogate modeling of power system components, using Deep Operator Networks (DeepONets) to learn mappings from system states and time-varying inputs to full trajectories without step-by-step integration. To enhance generalization and data efficiency, we introduce Physics-Informed DeepONets (PI-DeepONets), which embed the residuals of governing equations into the training loss. Our results show that DeepONets, and especially PI-DeepONets, achieve accurate predictions under diverse scenarios, providing over 30 times speedup compared to high-order ODE solvers. Benchmarking against Physics-Informed Neural Networks (PINNs) highlights superior stability and scalability. Our results demonstrate neural operators as a promising path toward real-time, physics-aware simulation of power system dynamics.

Recent years have seen a surge in deep learning approaches to accelerate numerical solvers, which provide faithful but computationally intensive simulations of the physical world. These deep surrogates are generally trained in a supervised manner from limited amounts of data slowly generated by the same solver they intend to accelerate. We propose an open-source framework that enables the online training of these models from a large ensemble run of simulations. It leverages multiple levels of parallelism to generate rich datasets. The framework avoids I/O bottlenecks and storage issues by directly streaming the generated data. A training reservoir mitigates the inherent bias of streaming while maximizing GPU throughput. Experiment on training a fully connected network as a surrogate for the heat equation shows the proposed approach enables training on 8TB of data in 2 hours with an accuracy improved by 47% and a batch throughput multiplied by 13 compared to a traditional offline procedure.

Designing urban spaces that provide pedestrian wind comfort and safety requires time-resolved Computational Fluid Dynamics (CFD) simulations, but their current computational cost makes extensive design exploration impractical. We introduce WinDiNet (Wind Diffusion Network), a pretrained video diffusion model that is repurposed as a fast, differentiable surrogate for this task. Starting from LTX-Video, a 2B-parameter latent video transformer, we fine-tune on 10,000 2D incompressible CFD simulations over procedurally generated building layouts. A systematic study of training regimes, conditioning mechanisms, and VAE adaptation strategies, including a physics-informed decoder loss, identifies a configuration that outperforms purpose-built neural PDE solvers. The resulting model generates full 112-frame rollouts in under a second. As the surrogate is end-to-end differentiable, it doubles as a physics simulator for gradient-based inverse optimization: given an urban footprint layout, we optimize building positions directly through backpropagation to improve wind safety as well as pedestrian wind comfort. Experiments on single- and multi-inlet layouts show that the optimizer discovers effective layouts even under challenging multi-objective configurations, with all improvements confirmed by ground-truth CFD simulations.

Traditional experimental and numerical approaches for fluid dynamics problems often suffer from high computational cost, mesh sensitivity, and limited capability in capturing complex physical behaviors. Moreover, conventional physics-informed neural networks (PINNs) frequently struggle in chaotic and highly unsteady flow regimes. In this work, we propose PhysicsFormer, a fast and efficient transformer-based physics-informed framework that incorporates multi-head encoder-decoder cross-attention. Unlike multilayer perceptron-based PINNs, PhysicsFormer operates on sequential representations constructed from spatio-temporal data, enabling effective learning of long-range temporal dependencies and improved propagation of initial condition information. A data-embedding strategy is employed to convert spatio-temporal points into pseudo-sequences, while a dynamics-weighted loss function replaces the standard PINNs formulation. Owing to its parallel learning structure, PhysicsFormer demonstrates superior computational efficiency compared to existing transformer-based approaches. The framework is validated on Burgers' equation and flow reconstruction governed by the Navier-Stokes equations, achieving mean squared errors on the order of 10^{-6}. In addition, an inverse problem involving parameter identification in the two-dimensional incompressible Navier-Stokes equations is investigated. For clean data, PhysicsFormer achieves zero identification error for both λ_1 and λ_2; under 1% Gaussian noise, the errors are 0.07% for λ_1 and 0% for λ_2. These results demonstrate that PhysicsFormer provides a reliable and computationally efficient surrogate modeling framework for time-dependent fluid flow problems.

Simulations of turbulent flows in 3D are one of the most expensive simulations in computational fluid dynamics (CFD). Many works have been written on surrogate models to replace numerical solvers for fluid flows with faster, learned, autoregressive models. However, the intricacies of turbulence in three dimensions necessitate training these models with very small time steps, while generating realistic flow states requires either long roll-outs with many steps and significant error accumulation or starting from a known, realistic flow state - something we aimed to avoid in the first place. Instead, we propose to approach turbulent flow simulation as a generative task directly learning the manifold of all possible turbulent flow states without relying on any initial flow state. For our experiments, we introduce a challenging 3D turbulence dataset of high-resolution flows and detailed vortex structures caused by various objects and derive two novel sample evaluation metrics for turbulent flows. On this dataset, we show that our generative model captures the distribution of turbulent flows caused by unseen objects and generates high-quality, realistic samples amenable for downstream applications without access to any initial state.

Building local surrogates to accelerate stationary point searches on potential energy surfaces spans decades of effort. Done correctly, surrogates can reduce the number of expensive electronic structure evaluations by roughly an order of magnitude while preserving the accuracy of the underlying theory, with the gain depending on oracle cost, search distance, and the availability of analytical forces. We present a unified Bayesian optimization view of minimization, single-point saddle searches, and double-ended path searches: all three share one six-step surrogate loop and differ only in the inner optimization target and the acquisition criterion. The framework uses Gaussian process regression with derivative observations, inverse-distance kernels, and active learning, and we develop optional extensions for production use, including farthest-point sampling with the Earth Mover's Distance, MAP regularization, an adaptive trust radius, and random Fourier features for scaling. Accompanying pedagogical Rust code demonstrates that all three applications use the same Bayesian optimization loop, bridging the gap between theoretical formulation and practical execution.

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

We present a neural network emulator to constrain the thermal parameters of the intergalactic medium (IGM) at 5.4z6.0 using the Lyman-displaystylealpha (Lydisplaystylealpha) forest flux auto-correlation function. Our auto-differentiable JAX-based framework accelerates the surrogate model generation process using approximately 100 sparsely sampled Nyx hydrodynamical simulations with varying combinations of thermal parameters, i.e., the temperature at mean density T_{{0}}, the slope of the temperaturedisplaystyle-density relation displaystylegamma, and the mean transmission flux langle{F}{rangle}. We show that this emulator has a typical accuracy of 1.0% across the specified redshift range. Bayesian inference of the IGM thermal parameters, incorporating emulator uncertainty propagation, is further expedited using NumPyro Hamiltonian Monte Carlo. We compare both the inference results and computational cost of our framework with the traditional nearest-neighbor interpolation approach applied to the same set of mock Lyalpha flux. By examining the credibility contours of the marginalized posteriors for T_{{0}},gamma,and{langle}{F}{rangle} obtained using the emulator, the statistical reliability of measurements is established through inference on 100 realistic mock data sets of the auto-correlation function.

Neural networks are a commonly used approach to replace physical models with computationally cheap surrogates. Parametric uncertainty quantification can be included in training, assuming that an accurate prior distribution of the model parameters is available. Here we study the common opposite situation, where direct screening or random sampling of model parameters leads to exhaustive training times and evaluations at unphysical parameter values. Our solution is to decouple uncertainty quantification from network architecture. Instead of sampling network weights, we introduce the model-parameter distribution as an input to network training via Markov chain Monte Carlo (MCMC). In this way, the surrogate achieves the same uncertainty quantification as the underlying physical model, but with substantially reduced computation time. The approach is fully agnostic with respect to the neural network choice. In our examples, we present a quantile emulator for prediction and a novel autoencoder-based ODE network emulator that can flexibly estimate different trajectory paths corresponding to different ODE model parameters. Moreover, we present a mathematical analysis that provides a transparent way to relate potential performance loss to measurable distribution mismatch.

Shape optimization is essential in aerospace vehicle design, including reentry systems, and propulsion system components, as it directly influences aerodynamic efficiency, structural integrity, and overall mission success. Rapid and accurate prediction of external and internal flows accelerates design iterations. To this end, we develop a new variant of DeepONet, called Fusion-DeepONet as a fast surrogate model for geometry-dependent hypersonic and supersonic flow fields. We evaluated Fusion-DeepONet in learning two external hypersonic flows and a supersonic shape-dependent internal flow problem. First, we compare the performance of Fusion-DeepONet with state-of-the-art neural operators to learn inviscid hypersonic flow around semi-elliptic blunt bodies for two grid types: uniform Cartesian and irregular grids. Fusion-DeepONet provides comparable accuracy to parameter-conditioned U-Net on uniform grids while outperforming MeshGraphNet and Vanilla-DeepONet on irregular grids. Fusion-DeepONet requires significantly fewer trainable parameters than U-Net, MeshGraphNet, and FNO. For the second hypersonic problem, we set up Fusion-DeepONet to map from geometry and free stream Mach number to the temperature field around a reentry capsule traveling at hypersonic speed. This fast surrogate is then improved to predict the spatial derivative of the temperature, resulting in an accurate prediction of heat flux at the surfaces of the capsule. To enhance the accuracy of spatial derivative prediction, we introduce a derivative-enhanced loss term with the least computation overhead. For the third problem, we show that Fusion-DeepONet outperforms MeshGraphNet in learning geometry-dependent supersonic flow in a converging-diverging nozzle configuration. For all the problems, we used high-fidelity simulations with a high-order entropy-stable DGSEM solver to generate training datasets with limited samples.

Scientific applications increasingly demand real-time surrogate models that can capture the behavior of strongly coupled multiphysics systems driven by multiple input functions, such as in thermo-mechanical and electro-thermal processes. While neural operator frameworks, such as Deep Operator Networks (DeepONets), have shown considerable success in single-physics settings, their extension to multiphysics problems remains poorly understood. In particular, the challenge of learning nonlinear interactions between tightly coupled physical fields has received little systematic attention. This study addresses a foundational question: should the architectural design of a neural operator reflect the strength of physical coupling it aims to model? To answer this, we present the first comprehensive, architecture-aware evaluation of DeepONet variants across three regimes: single-physics, weakly coupled, and strongly coupled multiphysics systems. We consider a reaction-diffusion equation with dual spatial inputs, a nonlinear thermo-electrical problem with bidirectional coupling through temperature-dependent conductivity, and a viscoplastic thermo-mechanical model of steel solidification governed by transient phase-driven interactions. Two operator-learning frameworks, the classical DeepONet and its sequential GRU-based extension, S-DeepONet, are benchmarked using both single-branch and multi-branch (MIONet-style) architectures. Our results demonstrate that architectural alignment with physical coupling is crucial: single-branch networks significantly outperform multi-branch counterparts in strongly coupled settings, whereas multi-branch encodings offer advantages for decoupled or single-physics problems. Once trained, these surrogates achieve full-field predictions up to 1.8e4 times faster than high-fidelity finite-element solvers, without compromising solution accuracy.

The Muon optimizer has received considerable attention for its strong performance in training large language models, yet the design principle behind its matrix-gradient orthogonalization remains largely elusive. In this paper, we introduce a surrogate model that not only sheds new light on the design of Muon, but more importantly leads to a new optimizer. In the same spirit as the derivation of Newton's method, the surrogate approximates the loss as a quadratic function of the perturbation to a weight matrix W using only three matrices: the gradient G, an output-space curvature matrix H, and the data matrix Z that stacks the layer inputs. By minimizing this surrogate in one step and adopting a certain isotropic assumption on the weights, we obtain the closed-form update rule (up to momentum and weight decay) W leftarrow W - ηcdot msgn(G(ZZ^top)^{-1}), where η is the learning rate and msgn(X)=UV^top if X=USV^top is a compact singular value decomposition. This new optimization method, which we refer to as Newton-Muon, shows that standard Muon can be interpreted as an implicit Newton-type method that neglects the right preconditioning induced by the input second moment. Empirically, on a reproduction of the earliest publicly released Modded-NanoGPT speedrun configuration using Muon for GPT-2 pretraining, Newton-Muon reaches the target validation loss in 6\% fewer iteration steps and reduces wall-clock training time by about 4\%.

We present a method for parametrizing sub-grid processes in the Shallow Water equations. We define coarse variables and local spatial averages and use a feed-forward neural network to learn sub-grid fluxes. Our method results in a local parametrization that uses a four-point computational stencil, which has several advantages over globally coupled parametrizations. We demonstrate numerically that our method improves energy balance in long-term turbulent simulations and also accurately reproduces individual solutions. The neural network parametrization can be easily combined with flux limiting to reduce oscillations near shocks. More importantly, our method provides reliable parametrizations, even in dynamical regimes that are not included in the training data.

Generative models transform random noise into images; their inversion aims to transform images back to structured noise for recovery and editing. This paper addresses two key tasks: (i) inversion and (ii) editing of a real image using stochastic equivalents of rectified flow models (such as Flux). Although Diffusion Models (DMs) have recently dominated the field of generative modeling for images, their inversion presents faithfulness and editability challenges due to nonlinearities in drift and diffusion. Existing state-of-the-art DM inversion approaches rely on training of additional parameters or test-time optimization of latent variables; both are expensive in practice. Rectified Flows (RFs) offer a promising alternative to diffusion models, yet their inversion has been underexplored. We propose RF inversion using dynamic optimal control derived via a linear quadratic regulator. We prove that the resulting vector field is equivalent to a rectified stochastic differential equation. Additionally, we extend our framework to design a stochastic sampler for Flux. Our inversion method allows for state-of-the-art performance in zero-shot inversion and editing, outperforming prior works in stroke-to-image synthesis and semantic image editing, with large-scale human evaluations confirming user preference.

Generative AI models have made significant progress in automating the creation of 3D shapes, which has the potential to transform car design. In engineering design and optimization, evaluating engineering metrics is crucial. To make generative models performance-aware and enable them to create high-performing designs, surrogate modeling of these metrics is necessary. However, the currently used representations of three-dimensional (3D) shapes either require extensive computational resources to learn or suffer from significant information loss, which impairs their effectiveness in surrogate modeling. To address this issue, we propose a new two-dimensional (2D) representation of 3D shapes. We develop a surrogate drag model based on this representation to verify its effectiveness in predicting 3D car drag. We construct a diverse dataset of 9,070 high-quality 3D car meshes labeled by drag coefficients computed from computational fluid dynamics (CFD) simulations to train our model. Our experiments demonstrate that our model can accurately and efficiently evaluate drag coefficients with an R^2 value above 0.84 for various car categories. Moreover, the proposed representation method can be generalized to many other product categories beyond cars. Our model is implemented using deep neural networks, making it compatible with recent AI image generation tools (such as Stable Diffusion) and a significant step towards the automatic generation of drag-optimized car designs. We have made the dataset and code publicly available at https://decode.mit.edu/projects/dragprediction/.

Time-dependent partial differential equations (PDEs) are ubiquitous in science and engineering. Recently, mostly due to the high computational cost of traditional solution techniques, deep neural network based surrogates have gained increased interest. The practical utility of such neural PDE solvers relies on their ability to provide accurate, stable predictions over long time horizons, which is a notoriously hard problem. In this work, we present a large-scale analysis of common temporal rollout strategies, identifying the neglect of non-dominant spatial frequency information, often associated with high frequencies in PDE solutions, as the primary pitfall limiting stable, accurate rollout performance. Based on these insights, we draw inspiration from recent advances in diffusion models to introduce PDE-Refiner; a novel model class that enables more accurate modeling of all frequency components via a multistep refinement process. We validate PDE-Refiner on challenging benchmarks of complex fluid dynamics, demonstrating stable and accurate rollouts that consistently outperform state-of-the-art models, including neural, numerical, and hybrid neural-numerical architectures. We further demonstrate that PDE-Refiner greatly enhances data efficiency, since the denoising objective implicitly induces a novel form of spectral data augmentation. Finally, PDE-Refiner's connection to diffusion models enables an accurate and efficient assessment of the model's predictive uncertainty, allowing us to estimate when the surrogate becomes inaccurate.

Surrogate models are necessary to optimize meaningful quantities in physical dynamics as their recursive numerical resolutions are often prohibitively expensive. It is mainly the case for fluid dynamics and the resolution of Navier-Stokes equations. However, despite the fast-growing field of data-driven models for physical systems, reference datasets representing real-world phenomena are lacking. In this work, we develop AirfRANS, a dataset for studying the two-dimensional incompressible steady-state Reynolds-Averaged Navier-Stokes equations over airfoils at a subsonic regime and for different angles of attacks. We also introduce metrics on the stress forces at the surface of geometries and visualization of boundary layers to assess the capabilities of models to accurately predict the meaningful information of the problem. Finally, we propose deep learning baselines on four machine learning tasks to study AirfRANS under different constraints for generalization considerations: big and scarce data regime, Reynolds number, and angle of attack extrapolation.

We introduce Flux Matching, a new paradigm for generative modeling that generalizes existing score-based models to a broader family of vector fields that need not be conservative. Rather than requiring the model to equal the data score, the Flux Matching objective imposes a weaker condition that admits infinitely many vector fields whose stationary distribution is the data. This flexibility enables a class of generative models that cannot be learned under score matching, in which inductive biases, structural priors, and properties of the dynamics can be directly imposed or optimized. We show that Flux Matching performs strongly on high-dimensional image datasets and, more importantly, that our added freedom unlocks a range of applications including faster sampling, interpretable and mechanistic models, and dynamics that encode directed dependencies between variables. More broadly, Flux Matching opens a new dimension in generative modeling by turning the vector field itself into a design choice rather than a fixed target. Code is available at https://github.com/peterpaohuang/flux_matching.

We present TORAX, a new, open-source, differentiable tokamak core transport simulator implemented in Python using the JAX framework. TORAX solves the coupled equations for ion heat transport, electron heat transport, particle transport, and current diffusion, incorporating modular physics-based and ML models. JAX's just-in-time compilation ensures fast runtimes, while its automatic differentiation capability enables gradient-based optimization workflows and simplifies the use of Jacobian-based PDE solvers. Coupling to ML-surrogates of physics models is greatly facilitated by JAX's intrinsic support for neural network development and inference. TORAX is verified against the established RAPTOR code, demonstrating agreement in simulated plasma profiles. TORAX provides a powerful and versatile tool for accelerating research in tokamak scenario modeling, pulse design, and control.

Gravitational-wave approximants are essential for gravitational-wave astronomy, allowing the coverage binary black hole parameter space for inference or match filtering without costly numerical relativity (NR) simulations, but generally trading some accuracy for computational efficiency. To reduce this trade-off, NR surrogate models can be constructed using interpolation within NR waveform space. We present a 2-stage training approach for neural network-based NR surrogate models. Initially trained on approximant-generated waveforms and then fine-tuned with NR data, these dual-stage artificial neural surrogate (DANSur) models offer rapid and competitively accurate waveform generation, generating millions in under 20ms on a GPU while keeping mean mismatches with NR around 10^{-4}. Implemented in the bilby framework, we show they can be used for parameter estimation tasks.

The spatiotemporal resolution of Partial Differential Equations (PDEs) plays important roles in the mathematical description of the world's physical phenomena. In general, scientists and engineers solve PDEs numerically by the use of computationally demanding solvers. Recently, deep learning algorithms have emerged as a viable alternative for obtaining fast solutions for PDEs. Models are usually trained on synthetic data generated by solvers, stored on disk and read back for training. This paper advocates that relying on a traditional static dataset to train these models does not allow the full benefit of the solver to be used as a data generator. It proposes an open source online training framework for deep surrogate models. The framework implements several levels of parallelism focused on simultaneously generating numerical simulations and training deep neural networks. This approach suppresses the I/O and storage bottleneck associated with disk-loaded datasets, and opens the way to training on significantly larger datasets. Experiments compare the offline and online training of four surrogate models, including state-of-the-art architectures. Results indicate that exposing deep surrogate models to more dataset diversity, up to hundreds of GB, can increase model generalization capabilities. Fully connected neural networks, Fourier Neural Operator (FNO), and Message Passing PDE Solver prediction accuracy is improved by 68%, 16% and 7%, respectively.

Offline optimization has recently emerged as an increasingly popular approach to mitigate the prohibitively expensive cost of online experimentation. The key idea is to learn a surrogate of the black-box function that underlines the target experiment using a static (offline) dataset of its previous input-output queries. Such an approach is, however, fraught with an out-of-distribution issue where the learned surrogate becomes inaccurate outside the offline data regimes. To mitigate this, existing offline optimizers have proposed numerous conditioning techniques to prevent the learned surrogate from being too erratic. Nonetheless, such conditioning strategies are often specific to particular surrogate or search models, which might not generalize to a different model choice. This motivates us to develop a model-agnostic approach instead, which incorporates a notion of model sharpness into the training loss of the surrogate as a regularizer. Our approach is supported by a new theoretical analysis demonstrating that reducing surrogate sharpness on the offline dataset provably reduces its generalized sharpness on unseen data. Our analysis extends existing theories from bounding generalized prediction loss (on unseen data) with loss sharpness to bounding the worst-case generalized surrogate sharpness with its empirical estimate on training data, providing a new perspective on sharpness regularization. Our extensive experimentation on a diverse range of optimization tasks also shows that reducing surrogate sharpness often leads to significant improvement, marking (up to) a noticeable 9.6% performance boost. Our code is publicly available at https://github.com/cuong-dm/IGNITE

The Dragonfly network, with its high-radix and low-diameter structure, is a leading interconnect in high-performance computing. A major challenge is workload interference on shared network links. Parallel discrete event simulation (PDES) is commonly used to analyze workload interference. However, high-fidelity PDES is computationally expensive, making it impractical for large-scale or real-time scenarios. Hybrid simulation that incorporates data-driven surrogate models offers a promising alternative, especially for forecasting application runtime, a task complicated by the dynamic behavior of network traffic. We present \ourmodel, a surrogate model that combines graph neural networks (GNNs) and large language models (LLMs) to capture both spatial and temporal patterns from port level router data. \ourmodel outperforms existing statistical and machine learning baselines, enabling accurate runtime prediction and supporting efficient hybrid simulation of Dragonfly networks.

Data-driven surrogate models are increasingly adopted to accelerate vehicle design. However, open-source multi-fidelity datasets and empirical guidelines linking dataset size to model performance remain limited. This study investigates the relationship between training data size and prediction accuracy for a graph neural network (GNN) based surrogate model for aerodynamic field prediction. We release an open-source, multi-fidelity aerodynamic dataset for double-delta wings, comprising 2448 flow snapshots across 272 geometries evaluated at angles of attack from 11 (degree) to 19 (degree) at Ma=0.3 using both Vortex Lattice Method (VLM) and Reynolds-Averaged Navier-Stokes (RANS) solvers. The geometries are generated using a nested Saltelli sampling scheme to support future dataset expansion and variance-based sensitivity analysis. Using this dataset, we conduct a preliminary empirical scaling study of the MF-VortexNet surrogate by constructing six training datasets with sizes ranging from 40 to 1280 snapshots and training models with 0.1 to 2.4 million parameters under a fixed training budget. We find that the test error decreases with data size with a power-law exponent of -0.6122, indicating efficient data utilization. Based on this scaling law, we estimate that the optimal sampling density is approximately eight samples per dimension in a d-dimensional design space. The results also suggest improved data utilization efficiency for larger surrogate models, implying a potential trade-off between dataset generation cost and model training budget.

Nuclear fusion plays a pivotal role in the quest for reliable and sustainable energy production. A major roadblock to viable fusion power is understanding plasma turbulence, which significantly impairs plasma confinement, and is vital for next-generation reactor design. Plasma turbulence is governed by the nonlinear gyrokinetic equation, which evolves a 5D distribution function over time. Due to its high computational cost, reduced-order models are often employed in practice to approximate turbulent transport of energy. However, they omit nonlinear effects unique to the full 5D dynamics. To tackle this, we introduce GyroSwin, the first scalable 5D neural surrogate that can model 5D nonlinear gyrokinetic simulations, thereby capturing the physical phenomena neglected by reduced models, while providing accurate estimates of turbulent heat transport.GyroSwin (i) extends hierarchical Vision Transformers to 5D, (ii) introduces cross-attention and integration modules for latent 3Dleftrightarrow5D interactions between electrostatic potential fields and the distribution function, and (iii) performs channelwise mode separation inspired by nonlinear physics. We demonstrate that GyroSwin outperforms widely used reduced numerics on heat flux prediction, captures the turbulent energy cascade, and reduces the cost of fully resolved nonlinear gyrokinetics by three orders of magnitude while remaining physically verifiable. GyroSwin shows promising scaling laws, tested up to one billion parameters, paving the way for scalable neural surrogates for gyrokinetic simulations of plasma turbulence.

Macro placement significantly affects a chip's post-route performance, power, and area (PPA). Most placement methods optimize half-perimeter wirelength (HPWL) as the primary objective. However, recent benchmarking shows a near-zero correlation between HPWL and post-route timing metrics such as the worst negative slack (WNS) and total negative slack (TNS). As a result, all six evaluated artificial intelligence (AI) placers degraded PPA relative to the hierarchical baseline. Recent efforts have tried to train cross-stage predictors to close this gap. However, existing methods focus on macro-only representations and use pre-route metrics as training labels. A label fidelity study of ten circuits at four design flow stages reveals that HPWL and pre-route timing poorly reflect final post-route timing rankings. In contrast, post-global-routing achieves the best balance between final timing fidelity and label generation cost-effectiveness. Based on this finding, PPAPlace is a timing-driven differentiable surrogate predicting post-route PPA from macro and standard-cell placements. The surrogate is a dual-stream predictor that combines graph attention over the chip netlist with spatial convolution over the placement grid. It is trained on post-global-routing labels. The predicted WNS and TNS gradients flow end-to-end back to cell coordinates. PPAPlace exploits these gradients in two ways: as a co-objective injected into an analytical placer's optimization loop (PPAPlace-CoOpt), and as a post-placement refinement step that adjusts macro positions via projected gradient descent (PPAPlace-Refine). On five ChiPBench test circuits excluded from training, PPAPlace improves average WNS and TNS by 22\% and 51\% over the hierarchical baseline while preserving power and routability, using the same predictor without test-circuit retraining. Code is available at https://github.com/ValleyC/PPAPlace.

Multiscale problems are ubiquitous in physics. Numerical simulations of such problems by solving partial differential equations (PDEs) at high resolution are computationally too expensive for many-query scenarios, e.g., uncertainty quantification, remeshing applications, topology optimization, and so forth. This limitation has motivated the application of data-driven surrogate models, where the microscale computations are substituted with a surrogate, usually acting as a black-box mapping between macroscale quantities. These models offer significant speedups but struggle with incorporating microscale physical constraints, such as the balance of linear momentum and constitutive models. In this contribution, we propose Equilibrium Neural Operator (EquiNO) as a complementary physics-informed PDE surrogate for predicting microscale physics and compare it with variational physics-informed neural and operator networks. Our framework, applicable to the so-called multiscale FE^{,2}, computations, introduces the FE-OL approach by integrating the finite element (FE) method with operator learning (OL). We apply the proposed FE-OL approach to quasi-static problems of solid mechanics. The results demonstrate that FE-OL can yield accurate solutions even when confronted with a restricted dataset during model development. Our results show that EquiNO achieves speedup factors exceeding 8000-fold compared to traditional methods and offers an optimal balance between data-driven and physics-based strategies.

We consider minimizing functions for which it is expensive to compute the (possibly stochastic) gradient. Such functions are prevalent in reinforcement learning, imitation learning and adversarial training. Our target optimization framework uses the (expensive) gradient computation to construct surrogate functions in a target space (e.g. the logits output by a linear model for classification) that can be minimized efficiently. This allows for multiple parameter updates to the model, amortizing the cost of gradient computation. In the full-batch setting, we prove that our surrogate is a global upper-bound on the loss, and can be (locally) minimized using a black-box optimization algorithm. We prove that the resulting majorization-minimization algorithm ensures convergence to a stationary point of the loss. Next, we instantiate our framework in the stochastic setting and propose the SSO algorithm, which can be viewed as projected stochastic gradient descent in the target space. This connection enables us to prove theoretical guarantees for SSO when minimizing convex functions. Our framework allows the use of standard stochastic optimization algorithms to construct surrogates which can be minimized by any deterministic optimization method. To evaluate our framework, we consider a suite of supervised learning and imitation learning problems. Our experiments indicate the benefits of target optimization and the effectiveness of SSO.

The carbon footprint of any deployed Large Language Model (LLM) accumulates during inference, where repeated use of the model substantially exceeds the one-time cost of fine-tuning. Yet most efficiency interventions target either pre-training scale or post-hoc compression. We ask whether folding a calibrated, differentiable energy surrogate into the fine-tuning objective can produce inference behavior that gains task accuracy at zero or near-zero carbon cost, a break-even configuration. We propose a joint loss mechanism with a per-model carbon-emission parameter, a linear surrogate over parameter norm, FLOP proxy, and a memory proxy, fit from on-hardware energy profiling. We fine-tune three architecturally distinct families: Gemma-2 2B, Llama-3.1 8B, and Qwen-2.5 14B, and evaluate inference F1 and CO_2 emissions on three MMLU subjects: abstract algebra, philosophy, and formal logic. We discover from several outcomes that the carbon term behaves as either harmful interference or beneficial regularization depending on the task structure. We position calibrated carbon-aware fine-tuning as a lightweight, drop-in regularizer with a non-empty but model and task-dependent break-even region. This is an ongoing work, and we will release our codebase soon.

Traditional scientific discovery relies on an iterative hypothesise-experiment-refine cycle that has driven progress for centuries, but its intuitive, ad-hoc implementation often wastes resources, yields inefficient designs, and misses critical insights. This tutorial presents Bayesian Optimisation (BO), a principled probability-driven framework that formalises and automates this core scientific cycle. BO uses surrogate models (e.g., Gaussian processes) to model empirical observations as evolving hypotheses, and acquisition functions to guide experiment selection, balancing exploitation of known knowledge and exploration of uncharted domains to eliminate guesswork and manual trial-and-error. We first frame scientific discovery as an optimisation problem, then unpack BO's core components, end-to-end workflows, and real-world efficacy via case studies in catalysis, materials science, organic synthesis, and molecule discovery. We also cover critical technical extensions for scientific applications, including batched experimentation, heteroscedasticity, contextual optimisation, and human-in-the-loop integration. Tailored for a broad audience, this tutorial bridges AI advances in BO with practical natural science applications, offering tiered content to empower cross-disciplinary researchers to design more efficient experiments and accelerate principled scientific discovery.

Neural surrogate solvers of partial differential equations (PDEs) promise dramatic speedups over numerical methods, especially in scenarios requiring many solves. However, current accuracy-based evaluations do not fully consider two central issues: (1) neural solvers incur substantial up-front costs for data generation, training, and tuning; and (2) classical solvers can also generate low-fidelity solutions at a sufficiently low simulation cost. To explicitly account for these realities and fully incorporate end-to-end costs, we propose an evaluation framework centered on breakeven complexity, a metric that counts the forward solves before a learned solver is cost-effective relative to an error-equivalent traditional solver. To evaluate this measure, we apply scaling laws to determine how much training budget to allocate to data generation and discuss how to achieve smooth error-matching in diverse settings. We evaluate the breakeven complexity of multiple neural PDE solvers on three PDEs on 2D periodic domains from APEBench and a novel benchmark of flows past multiple obstacles generated by the GPU-native PyFR code. Among other findings, our results suggest that neural PDE solvers become more effective as problems get harder in terms of cost, dimension, rollout, physics regime (e.g. higher Reynolds number), etc.

We present a generative framework for inverse design of five-layer transmissive Huygens' metasurfaces (HMSs), addressing a longstanding challenge in achieving full-phase, high-efficiency unit cell designs with minimal full-wave simulations. The key to achieving this is our reliance on the field-based semianalytical (SA) scheme developed in Part I of this paper, which allows rapid and highly effective synthesis of such multilayer composites, however with limited accuracy. To overcome the prohibitive data demands of traditional pipelines, we employ Mamba, a selective state space model well suited for long-range sequence modeling as the backbone of our learning framework. A bidirectional Mamba (Bi-Mamba) forward surrogate is first trained on SA-generated data and subsequently fine-tuned with full-wave CST samples. An ablation over a 1080-sample CST pool shows that as few as 270 full-wave calibration samples suffice to reach near-CST-level agreement at a fraction of the simulation cost. An autoregressive Mamba inverse generator is subsequently trained on surrogate-augmented data, treating unit-cell synthesis as a sequential generation task. The resulting one-to-many generative model produces diverse unit cell geometries conditioned on target scattering responses. It achieves CST-validated designs with field transmission magnitude 0.9 across the full 0-2π phase range at 20 GHz. Moreover, a CST-calibrated surrogate trained to accurately predict frequency responses (18-22 GHz) enables functional post-selection of inverse generated designs. Together, the hybrid SA-generative methodology in this two-part compilation establishes a scalable and data-efficient solution for multilayer HMS synthesis, with natural extensions toward broadband, oblique-incidence, and higher-dimensional electromagnetic inverse-design problems.

Scientific Machine Learning (SciML) is concerned with the development of learned emulators of physical systems governed by partial differential equations (PDE). In application domains such as weather forecasting, molecular dynamics, and inverse design, ML-based surrogate models are increasingly used to augment or replace inefficient and often non-differentiable numerical simulation algorithms. While a number of ML-based methods for approximating the solutions of PDEs have been proposed in recent years, they typically do not adapt to the parameters of the PDEs, making it difficult to generalize to PDE parameters not seen during training. We propose a Channel Attention mechanism guided by PDE Parameter Embeddings (CAPE) component for neural surrogate models and a simple yet effective curriculum learning strategy. The CAPE module can be combined with neural PDE solvers allowing them to adapt to unseen PDE parameters. The curriculum learning strategy provides a seamless transition between teacher-forcing and fully auto-regressive training. We compare CAPE in conjunction with the curriculum learning strategy using a popular PDE benchmark and obtain consistent and significant improvements over the baseline models. The experiments also show several advantages of CAPE, such as its increased ability to generalize to unseen PDE parameters without large increases inference time and parameter count.

Resided at the intersection of multi-fidelity optimization (MFO) and Bayesian optimization (BO), MF BO has found a niche in solving expensive engineering design optimization problems, thanks to its advantages in incorporating physical and mathematical understandings of the problems, saving resources, addressing exploitation-exploration trade-off, considering uncertainty, and processing parallel computing. The increasing number of works dedicated to MF BO suggests the need for a comprehensive review of this advanced optimization technique. In this paper, we survey recent developments of two essential ingredients of MF BO: Gaussian process (GP) based MF surrogates and acquisition functions. We first categorize the existing MF modeling methods and MFO strategies to locate MF BO in a large family of surrogate-based optimization and MFO algorithms. We then exploit the common properties shared between the methods from each ingredient of MF BO to describe important GP-based MF surrogate models and review various acquisition functions. By doing so, we expect to provide a structured understanding of MF BO. Finally, we attempt to reveal important aspects that require further research for applications of MF BO in solving intricate yet important design optimization problems, including constrained optimization, high-dimensional optimization, optimization under uncertainty, and multi-objective optimization.

Bayesian parameter inference is useful to improve Li-ion battery diagnostics and can help formulate battery aging models. However, it is computationally intensive and cannot be easily repeated for multiple cycles, multiple operating conditions, or multiple replicate cells. To reduce the computational cost of Bayesian calibration, numerical solvers for physics-based models can be replaced with faster surrogates. A physics-informed neural network (PINN) is developed as a surrogate for the pseudo-2D (P2D) battery model calibration. For the P2D surrogate, additional training regularization was needed as compared to the PINN single-particle model (SPM) developed in Part I. Both the PINN SPM and P2D surrogate models are exercised for parameter inference and compared to data obtained from a direct numerical solution of the governing equations. A parameter inference study highlights the ability to use these PINNs to calibrate scaling parameters for the cathode Li diffusion and the anode exchange current density. By realizing computational speed-ups of 2250x for the P2D model, as compared to using standard integrating methods, the PINN surrogates enable rapid state-of-health diagnostics. In the low-data availability scenario, the testing error was estimated to 2mV for the SPM surrogate and 10mV for the P2D surrogate which could be mitigated with additional data.

This paper presents a methodology to learn surrogate models of steady state fluid dynamics simulations on meshed domains, based on Implicit Neural Representations (INRs). The proposed models can be applied directly to unstructured domains for different flow conditions, handle non-parametric 3D geometric variations, and generalize to unseen shapes at test time. The coordinate-based formulation naturally leads to robustness with respect to discretization, allowing an excellent trade-off between computational cost (memory footprint and training time) and accuracy. The method is demonstrated on two industrially relevant applications: a RANS dataset of the two-dimensional compressible flow over a transonic airfoil and a dataset of the surface pressure distribution over 3D wings, including shape, inflow condition, and control surface deflection variations. On the considered test cases, our approach achieves a more than three times lower test error and significantly improves generalization error on unseen geometries compared to state-of-the-art Graph Neural Network architectures. Remarkably, the method can perform inference five order of magnitude faster than the high fidelity solver on the RANS transonic airfoil dataset. Code is available at https://gitlab.isae-supaero.fr/gi.catalani/aero-nepf

Time domain simulation, i.e., modeling the system's evolution over time, is a crucial tool for studying and enhancing power system stability and dynamic performance. However, these simulations become computationally intractable for renewable-penetrated grids, due to the small simulation time step required to capture renewable energy resources' ultra-fast dynamic phenomena in the range of 1-50 microseconds. This creates a critical need for solutions that are both fast and scalable, posing a major barrier for the stable integration of renewable energy resources and thus climate change mitigation. This paper explores operator learning, a family of machine learning methods that learn mappings between functions, as a surrogate model for these costly simulations. The paper investigates, for the first time, the fundamental concept of simulation time step-invariance, which enables models trained on coarse time steps to generalize to fine-resolution dynamics. Three operator learning methods are benchmarked on a simple test system that, while not incorporating practical complexities of renewable-penetrated grids, serves as a first proof-of-concept to demonstrate the viability of time step-invariance. Models are evaluated on (i) zero-shot super-resolution, where training is performed on a coarse simulation time step and inference is performed at super-resolution, and (ii) generalization between stable and unstable dynamic regimes. This work addresses a key challenge in the integration of renewable energy for the mitigation of climate change by benchmarking operator learning methods to model physical systems.

Generative machine learning methods, such as diffusion models and flow matching, have shown great potential in modeling complex system behaviors and building efficient surrogate models. However, these methods typically learn the underlying physics implicitly from data. We propose Physics-Based Flow Matching (PBFM), a novel generative framework that explicitly embeds physical constraints, both PDE residuals and algebraic relations, into the flow matching objective. We also introduce temporal unrolling at training time that improves the accuracy of the final, noise-free sample prediction. Our method jointly minimizes the flow matching loss and the physics-based residual loss without requiring hyperparameter tuning of their relative weights. Additionally, we analyze the role of the minimum noise level, sigma_{min}, in the context of physical constraints and evaluate a stochastic sampling strategy that helps to reduce physical residuals. Through extensive benchmarks on three representative PDE problems, we show that our approach yields up to an 8times more accurate physical residuals compared to FM, while clearly outperforming existing algorithms in terms of distributional accuracy. PBFM thus provides a principled and efficient framework for surrogate modeling, uncertainty quantification, and accelerated simulation in physics and engineering applications.

Atmospheric retrieval determines the properties of an atmosphere based on its measured spectrum. The low signal-to-noise ratio of exoplanet observations require a Bayesian approach to determine posterior probability distributions of each model parameter, given observed spectra. This inference is computationally expensive, as it requires many executions of a costly radiative transfer (RT) simulation for each set of sampled model parameters. Machine learning (ML) has recently been shown to provide a significant reduction in runtime for retrievals, mainly by training inverse ML models that predict parameter distributions, given observed spectra, albeit with reduced posterior accuracy. Here we present a novel approach to retrieval by training a forward ML surrogate model that predicts spectra given model parameters, providing a fast approximate RT simulation that can be used in a conventional Bayesian retrieval framework without significant loss of accuracy. We demonstrate our method on the emission spectrum of HD 189733 b and find good agreement with a traditional retrieval from the Bayesian Atmospheric Radiative Transfer (BART) code (Bhattacharyya coefficients of 0.9843--0.9972, with a mean of 0.9925, between 1D marginalized posteriors). This accuracy comes while still offering significant speed enhancements over traditional RT, albeit not as much as ML methods with lower posterior accuracy. Our method is ~9x faster per parallel chain than BART when run on an AMD EPYC 7402P central processing unit (CPU). Neural-network computation using an NVIDIA Titan Xp graphics processing unit is 90--180x faster per chain than BART on that CPU.

While complex simulations of physical systems have been widely used in engineering and scientific computing, lowering their often prohibitive computational requirements has only recently been tackled by deep learning approaches. In this paper, we present GraphSplineNets, a novel deep-learning method to speed up the forecasting of physical systems by reducing the grid size and number of iteration steps of deep surrogate models. Our method uses two differentiable orthogonal spline collocation methods to efficiently predict response at any location in time and space. Additionally, we introduce an adaptive collocation strategy in space to prioritize sampling from the most important regions. GraphSplineNets improve the accuracy-speedup tradeoff in forecasting various dynamical systems with increasing complexity, including the heat equation, damped wave propagation, Navier-Stokes equations, and real-world ocean currents in both regular and irregular domains.

To plan and optimize energy storage demands that account for Li-ion battery aging dynamics, techniques need to be developed to diagnose battery internal states accurately and rapidly. This study seeks to reduce the computational resources needed to determine a battery's internal states by replacing physics-based Li-ion battery models -- such as the single-particle model (SPM) and the pseudo-2D (P2D) model -- with a physics-informed neural network (PINN) surrogate. The surrogate model makes high-throughput techniques, such as Bayesian calibration, tractable to determine battery internal parameters from voltage responses. This manuscript is the first of a two-part series that introduces PINN surrogates of Li-ion battery models for parameter inference (i.e., state-of-health diagnostics). In this first part, a method is presented for constructing a PINN surrogate of the SPM. A multi-fidelity hierarchical training, where several neural nets are trained with multiple physics-loss fidelities is shown to significantly improve the surrogate accuracy when only training on the governing equation residuals. The implementation is made available in a companion repository (https://github.com/NREL/pinnstripes). The techniques used to develop a PINN surrogate of the SPM are extended in Part II for the PINN surrogate for the P2D battery model, and explore the Bayesian calibration capabilities of both surrogates.

With the increasing computational costs associated with deep learning, automated hyperparameter optimization methods, strongly relying on black-box Bayesian optimization (BO), face limitations. Freeze-thaw BO offers a promising grey-box alternative, strategically allocating scarce resources incrementally to different configurations. However, the frequent surrogate model updates inherent to this approach pose challenges for existing methods, requiring retraining or fine-tuning their neural network surrogates online, introducing overhead, instability, and hyper-hyperparameters. In this work, we propose FT-PFN, a novel surrogate for Freeze-thaw style BO. FT-PFN is a prior-data fitted network (PFN) that leverages the transformers' in-context learning ability to efficiently and reliably do Bayesian learning curve extrapolation in a single forward pass. Our empirical analysis across three benchmark suites shows that the predictions made by FT-PFN are more accurate and 10-100 times faster than those of the deep Gaussian process and deep ensemble surrogates used in previous work. Furthermore, we show that, when combined with our novel acquisition mechanism (MFPI-random), the resulting in-context freeze-thaw BO method (ifBO), yields new state-of-the-art performance in the same three families of deep learning HPO benchmarks considered in prior work.

Diffusion Transformers have established a new state-of-the-art in image synthesis, but the high computational cost of iterative sampling severely hampers their practical deployment. While existing acceleration methods often focus on the temporal domain, they overlook the substantial spatial redundancy inherent in the generative process, where global structures emerge long before fine-grained details are formed. The uniform computational treatment of all spatial regions represents a critical inefficiency. In this paper, we introduce Just-in-Time (JiT), a novel training-free framework that addresses this challenge by acceleration in the spatial domain. JiT formulates a spatially approximated generative ordinary differential equation (ODE) that drives the full latent state evolution based on computations from a dynamically selected, sparse subset of anchor tokens. To ensure seamless transitions as new tokens are incorporated to expand the dimensions of the latent state, we propose a deterministic micro-flow, a simple and effective finite-time ODE that maintains both structural coherence and statistical correctness. Extensive experiments on the state-of-the-art FLUX.1-dev model demonstrate that JiT achieves up to a 7x speedup with nearly lossless performance, significantly outperforming existing acceleration methods and establishing a new and superior trade-off between inference speed and generation fidelity.

Accurate and efficient detector simulation is essential for modern collider experiments. To reduce the high computational cost, various fast machine learning surrogate models have been proposed. Traditional surrogate models for calorimeter shower modeling train separate networks for each particle species, limiting scalability and reuse. We introduce AllShowers, a unified generative model that simulates calorimeter showers across multiple particle types using a single generative model. AllShowers is a continuous normalizing flow model with a Transformer architecture, enabling it to generate complex spatial and energy correlations in variable-length point cloud representations of showers. Trained on a diverse dataset of simulated showers in the highly granular ILD detector, the model demonstrates the ability to generate realistic showers for electrons, photons, and charged and neutral hadrons across a wide range of incident energies and angles without retraining. In addition to unifying shower generation for multiple particle types, AllShowers surpasses the fidelity of previous single-particle-type models for hadronic showers. Key innovations include the use of a layer embedding, allowing the model to learn all relevant calorimeter layer properties; a custom attention masking scheme to reduce computational demands and introduce a helpful inductive bias; and a shower- and layer-wise optimal transport mapping to improve training convergence and sample quality. AllShowers marks a significant step towards a universal model for calorimeter shower simulations in collider experiments.

Recent advances in neural surrogate modeling offer the potential for transformative innovations in applications such as automotive aerodynamics. Yet, industrial-scale problems often involve volumetric meshes with cell counts reaching the 100 millions, presenting major scalability challenges. Complex geometries further complicate modeling through intricate surface-volume interactions, while quantities such as vorticity are highly nonlinear and must satisfy strict divergence-free constraints. To address these requirements, we introduce AB-UPT as a novel modeling scheme for building neural surrogates for CFD simulations. AB-UPT is designed to: (i) decouple geometry encoding and prediction tasks via multi-branch operators; (ii) enable scalability to high-resolution outputs via neural simulation in a low-dimensional latent space, coupled with anchored neural field decoders to predict high-fidelity outputs; (iii) enforce physics consistency by a novel divergence-free formulation. We show that AB-UPT yields state-of-the-art predictive accuracy of surface and volume fields on automotive CFD simulations ranging from 33 thousand up to 150 million mesh cells. Furthermore, our anchored neural field architecture enables the enforcement of hard physical constraints on the physics predictions without degradation in performance, exemplified by modeling divergence-free vorticity fields. Notably, the proposed models can be trained on a single GPU in less than a day and predict industry-standard surface and volume fields within seconds. Additionally, we show that the flexible design of our method enables neural simulation from a CAD geometry alone, omitting the need for costly CFD meshing procedures.

Synthesizing optimal controllers for dynamical systems often involves solving optimization problems with hard real-time constraints. These constraints determine the class of numerical methods that can be applied: computationally expensive but accurate numerical routines are replaced by fast and inaccurate methods, trading inference time for solution accuracy. This paper provides techniques to improve the quality of optimized control policies given a fixed computational budget. We achieve the above via a hypersolvers approach, which hybridizes a differential equation solver and a neural network. The performance is evaluated in direct and receding-horizon optimal control tasks in both low and high dimensions, where the proposed approach shows consistent Pareto improvements in solution accuracy and control performance.

Rectified flow and reflow procedures have significantly advanced fast generation by progressively straightening ordinary differential equation (ODE) flows. They operate under the assumption that image and noise pairs, known as couplings, can be approximated by straight trajectories with constant velocity. However, we observe that modeling with constant velocity and using reflow procedures have limitations in accurately learning straight trajectories between pairs, resulting in suboptimal performance in few-step generation. To address these limitations, we introduce Constant Acceleration Flow (CAF), a novel framework based on a simple constant acceleration equation. CAF introduces acceleration as an additional learnable variable, allowing for more expressive and accurate estimation of the ODE flow. Moreover, we propose two techniques to further improve estimation accuracy: initial velocity conditioning for the acceleration model and a reflow process for the initial velocity. Our comprehensive studies on toy datasets, CIFAR-10, and ImageNet 64x64 demonstrate that CAF outperforms state-of-the-art baselines for one-step generation. We also show that CAF dramatically improves few-step coupling preservation and inversion over Rectified flow. Code is available at https://github.com/mlvlab/CAF{https://github.com/mlvlab/CAF}.

Accurately describing the distribution of CO_2 in the atmosphere with atmospheric tracer transport models is essential for greenhouse gas monitoring and verification support systems to aid implementation of international climate agreements. Large deep neural networks are poised to revolutionize weather prediction, which requires 3D modeling of the atmosphere. While similar in this regard, atmospheric transport modeling is subject to new challenges. Both, stable predictions for longer time horizons and mass conservation throughout need to be achieved, while IO plays a larger role compared to computational costs. In this study we explore four different deep neural networks (UNet, GraphCast, Spherical Fourier Neural Operator and SwinTransformer) which have proven as state-of-the-art in weather prediction to assess their usefulness for atmospheric tracer transport modeling. For this, we assemble the CarbonBench dataset, a systematic benchmark tailored for machine learning emulators of Eulerian atmospheric transport. Through architectural adjustments, we decouple the performance of our emulators from the distribution shift caused by a steady rise in atmospheric CO_2. More specifically, we center CO_2 input fields to zero mean and then use an explicit flux scheme and a mass fixer to assure mass balance. This design enables stable and mass conserving transport for over 6 months with all four neural network architectures. In our study, the SwinTransformer displays particularly strong emulation skill (90-day R^2 > 0.99), with physically plausible emulation even for forward runs of multiple years. This work paves the way forward towards high resolution forward and inverse modeling of inert trace gases with neural networks.

Many engineering problems involve phenomena whose governing equations are poorly characterized or only partially known. Surrogate modeling techniques such as neural networks can capture the behavior of these systems, but they typically demand large training datasets that are difficult to obtain in engineering contexts and yield models with limited physical interpretability. The Sparse Identification of Nonlinear Dynamics (SINDy) method addresses both limitations by performing sparse regression over libraries of candidate nonlinear terms, recovering interpretable governing equations from comparatively small datasets. Although SINDy has been demonstrated extensively on canonical benchmark systems, its application to practical engineering problems is less widely documented. This tutorial introduces the SINDy method and progressively builds toward its main extensions, from noise-robust weak-form and ensembling-based variants to constrained and parametrizable formulations. The paper and the accompanying tutorial (available at https://github.com/paullililili/SINDy4Engineers) is organized in three parts: the first introduces the standard SINDy algorithm and progressively extends it, inviting readers without prior knowledge to follow each step and adapt the methods to their own problems; the remaining two parts present detailed case studies on (1) the system identification of an unmanned aerial vehicle and (2) a chaotic thermosyphon heat exchanger. Through these examples, we aim to demonstrate that SINDy is simple to implement yet flexible enough to serve as a valuable identification tool for advanced engineering applications.

Physics-informed surrogate models can accelerate computational fluid dynamics simulations. However, many existing methods reproduce global flow patterns more reliably than localized multiscale structures. This study presents a physics-informed Fourier-wavelet transformer for next-step velocity-field reconstruction in real-world flow benchmarks. The proposed formulation combines hybrid Fourier-wavelet spectral encoding with physics-biased self-attention based on partial differential equation residual diagnostics. It also uses self-supervised pretraining through Masked Physics Prediction and Equation Consistency Prediction. The experiments are conducted on two real benchmark cases: cylinder-wake flow and fluid-structure interaction. All approaches are evaluated under a shared local protocol and compared with spectral, transformer-based, operator-learning, and physics-informed neural-network baselines. On the cylinder-wake benchmark, the proposed model achieves the best aggregate accuracy, with an all-channel normalized mean-squared error of 0.05875 and an all-channel Pearson correlation coefficient of 0.97019. On the fluid-structure-interaction benchmark, it gives the lowest all-channel normalized mean-squared error of 2.70 times 10^{-4}, compared with 4.02 times 10^{-4} for the strongest baseline. Component-wise field comparisons and scale-separated diagnostics further show stronger recovery of localized wake structures, including near-body, wake-core, and far-wake features. The results demonstrate improved real-world flow reconstruction while maintaining a practical accuracy-cost tradeoff.

Neural operator surrogates (NO) approximate PDE solutions orders of magnitude faster than numerical solvers, but suffer from spectral bias: high-frequency content is systematically attenuated, limiting reliability where fine-scale structure matters. Sparse sensor measurements of the field are often available too, offering pointwise accuracy without spectral distortion but covering only a small fraction of the domain. We address this by treating NO predictions as auxiliary observations in a diffusion posterior sampling framework. Our method, FreqNO-DPS (https://github.com/niccoloperrone/FreqNO-DPS), combines an unconditional score-based diffusion prior, trained on high-fidelity simulations, with diffusion posterior sampling (DPS) conditioned on sparse observations and guided by a frozen neural operator. Naive integration reintroduces the surrogate's spectral bias; we resolve this with a closed-form, spectrally shaped guidance score that weights the surrogate by its frequency-dependent accuracy and needs no denoiser backpropagation. A distribution-free analysis bounds the approximation error across the frequency-diffusion-time plane and shows the guidance's frequency dependence is preserved regardless of distributional assumptions. On 3D elastic wavefield prediction at 5% and 2% sensor coverage, the method reaches near-zero spectral bias across all bands, where both the surrogate and sensor-only DPS show systematic high-frequency attenuation. Isotropic guidance, the natural baseline, improves pointwise accuracy but carries the bias into the posterior nearly intact, confirming that frequency-dependent calibration is essential, not merely beneficial. The framework needs only paired surrogate/reference data and exploits no problem-specific structure beyond the residual's approximate spectral diagonality, verifiable for new surrogates via the coherence diagnostic we provide.

We introduced a novel method to solve Bayesian inverse problems governed by PDE equations with a hybrid two-level MCMC where we took advantage of the AI surrogate model speed and the accuracy of numerical models. We show theoretically the potential to solve Bayesian inverse problems accurately with only a small number of numerical samples when the AI surrogate model error is small. Several numerical experiment results are included which demonstrates the advantage of the hybrid method.

Directed energy deposition (DED) produces complex thermo-mechanical responses that can lead to distortion and reduced dimensional accuracy of a manufactured part. Thermo-mechanical finite element simulations are widely used to estimate these effects, but their computational cost and the complexity of accurately capturing DED physics limit their use in design iteration and process optimization. This paper introduces FLARE (Field Prediction via Linear Affine Reconstruction in wEight-space), a data-efficient surrogate modeling framework for predicting post-cooling displacement fields in DED from geometric and process parameters. We develop a predefined-geometry DED simulation workflow using an open-source finite element framework and generate a dataset of simulations with varying geometry, laser power, and deposition velocity. Each simulation provides full-field displacement, stress, strain, and temperature data throughout the manufacturing process. FLARE encodes each simulation as an implicit neural field and regularizes the corresponding neural-network weights so that they follow the affine structure of the input parameter space. This enables prediction of unseen parameter combinations by reconstructing network weights through affine mixing of training examples. On this DED benchmark, the method shows improved accuracy compared to baseline methods in both in-distribution and extrapolation settings. Although the present study focuses on DED displacement prediction, the proposed affine weight-space reconstruction framework offers a promising approach for data-efficient surrogate modeling of physical fields.

Reconstructing large-scale dynamic scenes from visual observations is a fundamental challenge in computer vision, with critical implications for robotics and autonomous systems. While recent differentiable rendering methods such as Neural Radiance Fields (NeRF) and 3D Gaussian Splatting (3DGS) have achieved impressive photorealistic reconstruction, they suffer from scalability limitations and require annotations to decouple actor motion. Existing self-supervised methods attempt to eliminate explicit annotations by leveraging motion cues and geometric priors, yet they remain constrained by per-scene optimization and sensitivity to hyperparameter tuning. In this paper, we introduce Flux4D, a simple and scalable framework for 4D reconstruction of large-scale dynamic scenes. Flux4D directly predicts 3D Gaussians and their motion dynamics to reconstruct sensor observations in a fully unsupervised manner. By adopting only photometric losses and enforcing an "as static as possible" regularization, Flux4D learns to decompose dynamic elements directly from raw data without requiring pre-trained supervised models or foundational priors simply by training across many scenes. Our approach enables efficient reconstruction of dynamic scenes within seconds, scales effectively to large datasets, and generalizes well to unseen environments, including rare and unknown objects. Experiments on outdoor driving datasets show Flux4D significantly outperforms existing methods in scalability, generalization, and reconstruction quality.

Aligning text-to-image flow matching models with human preferences via direct reward backpropagation is sample-efficient but hampered by two well-known pathologies: activations cannot be stored across the full sampling trajectory at modern model scale, and chained Jacobian products across steps inflate the reward gradient as it travels back to early indices. Connector-based methods, such as LeapAlign, address these issues by replacing the full backward trajectory with a short pinned path, highlighting a useful decoupling between sampling and optimization. However, the quality of the resulting gradient depends on how accurately this short path approximates the full rollout, especially over long intervals. We propose FlowBP, a unified surrogate-trajectory framework that treats the backward trajectory itself as the design object. FlowBP keeps a no-gradient cached rollout for sampling, then builds a lightweight backward surrogate from cached and selectively re-forwarded velocities. This view separates four choices: the reward-model input, active set, integration weights, and bridge coupling, and recovers prior direct-gradient methods as particular settings. Within this framework, we instantiate three variants: FlowBP-Sparse uses sparse Euler reconstruction, FlowBP-Bridge adds controlled bridge coupling, and FlowBP-Lagrange raises the order of leap quadrature. All three bound memory by the active-set size and limit gradient chaining to at most one Jacobian factor. Across SD3.5-M, FLUX.1-dev, and FLUX.2-Klein-base on preference, quality, and compositional metrics, the three variants improve over direct-gradient baselines on most metrics.

Surrogate modeling of wave propagation and scattering (i.e. the wave speed and source to wave field map) in heterogeneous media has significant potential in applications such as seismic imaging and inversion. High-contrast settings, such as subsurface models with salt bodies, exhibit strong scattering and phase sensitivity that challenge existing neural operators. We propose a hybrid architecture that decomposes the scattering operator into two separate contributions: a smooth background propagation and a high-contrast scattering correction. The smooth component is learned with a Fourier Neural Operator (FNO), which produces globally coupled feature tokens encoding background wave propagation; these tokens are then passed to a vision transformer, where attention is used to model the high-contrast scattering correction dominated by strong, spatial interactions. Evaluated on high-frequency Helmholtz problems with strong contrasts, the hybrid model achieves substantially improved phase and amplitude accuracy compared to standalone FNOs or transformers, with favorable accuracy-parameter scaling.

Machine learning-based surrogate models have emerged as a powerful tool to accelerate simulation-driven scientific workflows. However, their widespread adoption is hindered by the lack of large-scale, diverse, and standardized datasets tailored to physics-based simulations. While existing initiatives provide valuable contributions, many are limited in scope-focusing on specific physics domains, relying on fragmented tooling, or adhering to overly simplistic datamodels that restrict generalization. To address these limitations, we introduce PLAID (Physics-Learning AI Datamodel), a flexible and extensible framework for representing and sharing datasets of physics simulations. PLAID defines a unified standard for describing simulation data and is accompanied by a library for creating, reading, and manipulating complex datasets across a wide range of physical use cases (gitlab.com/drti/plaid). We release six carefully crafted datasets under the PLAID standard, covering structural mechanics and computational fluid dynamics, and provide baseline benchmarks using representative learning methods. Benchmarking tools are made available on Hugging Face, enabling direct participation by the community and contribution to ongoing evaluation efforts (huggingface.co/PLAIDcompetitions).

Optimization problems with nonlinear cost functions and combinatorial constraints appear in many real-world applications but remain challenging to solve efficiently compared to their linear counterparts. To bridge this gap, we propose SurCo that learns linear text{Sur}rogate costs which can be used in existing text{Co}mbinatorial solvers to output good solutions to the original nonlinear combinatorial optimization problem. The surrogate costs are learned end-to-end with nonlinear loss by differentiating through the linear surrogate solver, combining the flexibility of gradient-based methods with the structure of linear combinatorial optimization. We propose three SurCo variants: SurCo-zero for individual nonlinear problems, SurCo-prior for problem distributions, and SurCo-hybrid to combine both distribution and problem-specific information. We give theoretical intuition motivating SurCo, and evaluate it empirically. Experiments show that SurCo finds better solutions faster than state-of-the-art and domain expert approaches in real-world optimization problems such as embedding table sharding, inverse photonic design, and nonlinear route planning.

Diffusion models have achieved remarkable success in image and video generation tasks. However, the high computational demands of Diffusion Transformers (DiTs) pose a significant challenge to their practical deployment. While feature caching is a promising acceleration strategy, existing methods based on simple reusing or training-free forecasting struggle to adapt to the complex, stage-dependent dynamics of the diffusion process, often resulting in quality degradation and failing to maintain consistency with the standard denoising process. To address this, we propose a LEarnable Stage-Aware (LESA) predictor framework based on two-stage training. Our approach leverages a Kolmogorov-Arnold Network (KAN) to accurately learn temporal feature mappings from data. We further introduce a multi-stage, multi-expert architecture that assigns specialized predictors to different noise-level stages, enabling more precise and robust feature forecasting. Extensive experiments show our method achieves significant acceleration while maintaining high-fidelity generation. Experiments demonstrate 5.00x acceleration on FLUX.1-dev with minimal quality degradation (1.0% drop), 6.25x speedup on Qwen-Image with a 20.2% quality improvement over the previous SOTA (TaylorSeer), and 5.00x acceleration on HunyuanVideo with a 24.7% PSNR improvement over TaylorSeer. State-of-the-art performance on both text-to-image and text-to-video synthesis validates the effectiveness and generalization capability of our training-based framework across different models. Our code is included in the supplementary materials and will be released on GitHub.

Diffusion models deliver high-fidelity synthesis but remain slow due to iterative sampling. We empirically observe there exists feature invariance in deterministic sampling, and present InvarDiff, a training-free acceleration method that exploits the relative temporal invariance across timestep-scale and layer-scale. From a few deterministic runs, we compute a per-timestep, per-layer, per-module binary cache plan matrix and use a re-sampling correction to avoid drift when consecutive caches occur. Using quantile-based change metrics, this matrix specifies which module at which step is reused rather than recomputed. The same invariance criterion is applied at the step scale to enable cross-timestep caching, deciding whether an entire step can reuse cached results. During inference, InvarDiff performs step-first and layer-wise caching guided by this matrix. When applied to DiT and FLUX, our approach reduces redundant compute while preserving fidelity. Experiments show that InvarDiff achieves 2-3times end-to-end speed-ups with minimal impact on standard quality metrics. Qualitatively, we observe almost no degradation in visual quality compared with full computations.

The task of locating first order saddle points on high-dimensional surfaces describing the variation of energy as a function of atomic coordinates is an essential step for identifying the mechanism and estimating the rate of thermally activated events within the harmonic approximation of transition state theory. When combined directly with electronic structure calculations, the number of energy and atomic force evaluations needed for convergence is a primary issue. Here, we describe an efficient implementation of Gaussian process regression (GPR) acceleration of the minimum mode following method where a dimer is used to estimate the lowest eigenmode of the Hessian. A surrogate energy surface is constructed and updated after each electronic structure calculation. The method is applied to a test set of 500 molecular reactions previously generated by Hermez and coworkers [J. Chem. Theory Comput. 18, 6974 (2022)]. An order of magnitude reduction in the number of electronic structure calculations needed to reach the saddle point configurations is obtained by using the GPR compared to the dimer method. Despite the wide range in stiffness of the molecular degrees of freedom, the calculations are carried out using Cartesian coordinates and are found to require similar number of electronic structure calculations as an elaborate internal coordinate method implemented in the Sella software package. The present implementation of the GPR surrogate model in C++ is efficient enough for the wall time of the saddle point searches to be reduced in 3 out of 4 cases even though the calculations are carried out at a low Hartree-Fock level.

Bayesian optimization is a highly efficient approach to optimizing objective functions which are expensive to query. These objectives are typically represented by Gaussian process (GP) surrogate models which are easy to optimize and support exact inference. While standard GP surrogates have been well-established in Bayesian optimization, Bayesian neural networks (BNNs) have recently become practical function approximators, with many benefits over standard GPs such as the ability to naturally handle non-stationarity and learn representations for high-dimensional data. In this paper, we study BNNs as alternatives to standard GP surrogates for optimization. We consider a variety of approximate inference procedures for finite-width BNNs, including high-quality Hamiltonian Monte Carlo, low-cost stochastic MCMC, and heuristics such as deep ensembles. We also consider infinite-width BNNs and partially stochastic models such as deep kernel learning. We evaluate this collection of surrogate models on diverse problems with varying dimensionality, number of objectives, non-stationarity, and discrete and continuous inputs. We find: (i) the ranking of methods is highly problem dependent, suggesting the need for tailored inductive biases; (ii) HMC is the most successful approximate inference procedure for fully stochastic BNNs; (iii) full stochasticity may be unnecessary as deep kernel learning is relatively competitive; (iv) infinite-width BNNs are particularly promising, especially in high dimensions.

Neural surrogates and operator networks for solving partial differential equation (PDE) problems have attracted significant research interest in recent years. However, most existing approaches are limited in their ability to generalize solutions across varying non-parametric geometric domains. In this work, we address this challenge in the context of Polyethylene Terephthalate (PET) bottle buckling analysis, a representative packaging design problem conventionally solved using computationally expensive finite element analysis (FEA). We introduce a hybrid DeepONet-Transolver framework that simultaneously predicts nodal displacement fields and the time evolution of reaction forces during top load compression. Our methodology is evaluated on two families of bottle geometries parameterized by two and four design variables. Training data is generated using nonlinear FEA simulations in Abaqus for 254 unique designs per family. The proposed framework achieves mean relative L^{2} errors of 2.5-13% for displacement fields and approximately 2.4% for time-dependent reaction forces for the four-parameter bottle family. Point-wise error analyses further show absolute displacement errors on the order of 10^{-4}-10^{-3}, with the largest discrepancies confined to localized geometric regions. Importantly, the model accurately captures key physical phenomena, such as buckling behavior, across diverse bottle geometries. These results highlight the potential of our framework as a scalable and computationally efficient surrogate, particularly for multi-task predictions in computational mechanics and applications requiring rapid design evaluation.

The widespread use of neural surrogates in automotive aerodynamics, enabled by datasets such as DrivAerML and DrivAerNet++, has primarily focused on bluff-body flows with large wakes. Extending these methods to aerospace, particularly in the transonic regime, remains challenging due to the high level of non-linearity of compressible flows and 3D effects such as wingtip vortices. Existing aerospace datasets predominantly focus on 2D airfoils, neglecting these critical 3D phenomena. To address this gap, we present a new dataset of CFD simulations for 3D wings in the transonic regime. The dataset comprises volumetric and surface-level fields for around 30,000 samples with unique geometry and inflow conditions. This allows computation of lift and drag coefficients, providing a foundation for data-driven aerodynamic optimization of the drag-lift Pareto front. We evaluate several state-of-the-art neural surrogates on our dataset, including Transolver and AB-UPT, focusing on their out-of-distribution (OOD) generalization over geometry and inflow variations. AB-UPT demonstrates strong performance for transonic flowfields and reproduces physically consistent drag-lift Pareto fronts even for unseen wing configurations. Our results demonstrate that AB-UPT can approximate drag-lift Pareto fronts for unseen geometries, highlighting its potential as an efficient and effective tool for rapid aerodynamic design exploration. To facilitate future research, we open-source our dataset at https://huggingface.co/datasets/EmmiAI/Emmi-Wing.

We introduce a deep neural network-based numerical method for solving kinetic Fokker Planck equations, including both linear and nonlinear cases. Building upon the conservative dissipative structure of Vlasov-type equations, we formulate a class of generalized minimizing movement schemes as iterative constrained minimization problems: the conservative part determines the constraint set, while the dissipative part defines the objective functional. This leads to an analog of the classical Jordan-Kinderlehrer-Otto (JKO) scheme for Wasserstein gradient flows, and we refer to it as the kinetic JKO scheme. To compute each step of the kinetic JKO iteration, we introduce a particle-based approximation in which the velocity field is parameterized by deep neural networks. The resulting algorithm can be interpreted as a kinetic-oriented neural differential equation that enables the representation of high-dimensional kinetic dynamics while preserving the essential variational and structural properties of the underlying PDE. We validate the method with extensive numerical experiments and demonstrate that the proposed kinetic JKO-neural ODE framework is effective for high-dimensional numerical simulations.

Many state-of-the-art hyperparameter optimization (HPO) algorithms rely on model-based optimizers that learn surrogate models of the target function to guide the search. Gaussian processes are the de facto surrogate model due to their ability to capture uncertainty but they make strong assumptions about the observation noise, which might not be warranted in practice. In this work, we propose to leverage conformalized quantile regression which makes minimal assumptions about the observation noise and, as a result, models the target function in a more realistic and robust fashion which translates to quicker HPO convergence on empirical benchmarks. To apply our method in a multi-fidelity setting, we propose a simple, yet effective, technique that aggregates observed results across different resource levels and outperforms conventional methods across many empirical tasks.

We propose a new uncertainty estimator for gradient-free optimisation of black-box simulators using deep generative surrogate models. Optimisation of these simulators is especially challenging for stochastic simulators and higher dimensions. To address these issues, we utilise a deep generative surrogate approach to model the black box response for the entire parameter space. We then leverage this knowledge to estimate the proposed uncertainty based on the Wasserstein distance - the Wasserstein uncertainty. This approach is employed in a posterior agnostic gradient-free optimisation algorithm that minimises regret over the entire parameter space. A series of tests were conducted to demonstrate that our method is more robust to the shape of both the black box function and the stochastic response of the black box than state-of-the-art methods, such as efficient global optimisation with a deep Gaussian process surrogate.

Molecular Dynamics (MD) is a powerful computational microscope for probing protein functions. However, the need for fine-grained integration and the long timescales of biomolecular events make MD computationally expensive. To address this, several generative models have been proposed to generate surrogate trajectories at lower cost. Yet, these models typically learn a fixed-lag transition density, causing the training signal to be dominated by frequent but uninformative transitions. We introduce a new class of generative models, MSM Emulators, which instead learn to sample transitions across discrete states defined by an underlying Markov State Model (MSM). We instantiate this class with Markov Space Flow Matching (MarS-FM), whose sampling offers more than two orders of magnitude speedup compared to implicit- or explicit-solvent MD simulations. We benchmark Mars-FM ability to reproduce MD statistics through structural observables such as RMSD, radius of gyration, and secondary structure content. Our evaluation spans protein domains (up to 500 residues) with significant chemical and structural diversity, including unfolding events, and enforces strict sequence dissimilarity between training and test sets to assess generalization. Across all metrics, MarS-FM outperforms existing methods, often by a substantial margin.

Two benchmark problems for linear radiation transport and derived from the literature are presented in detail and several quantities of interest are defined. High-resolution simulations are computed using standard, robust numerical methods and implemented using HPC resources. The goal of these simulations is to provide reference solutions for new discretization approaches, to aid in the development of multi-fidelity uncertainty quantification and optimization algorithms, to provide data for training surrogates models. The code used to perform the simulations and post-process the data is publicly available, as is the raw data that used to generate the results presented in the paper.

An established way to improve the transferability of black-box evasion attacks is to craft the adversarial examples on an ensemble-based surrogate to increase diversity. We argue that transferability is fundamentally related to uncertainty. Based on a state-of-the-art Bayesian Deep Learning technique, we propose a new method to efficiently build a surrogate by sampling approximately from the posterior distribution of neural network weights, which represents the belief about the value of each parameter. Our extensive experiments on ImageNet, CIFAR-10 and MNIST show that our approach improves the success rates of four state-of-the-art attacks significantly (up to 83.2 percentage points), in both intra-architecture and inter-architecture transferability. On ImageNet, our approach can reach 94% of success rate while reducing training computations from 11.6 to 2.4 exaflops, compared to an ensemble of independently trained DNNs. Our vanilla surrogate achieves 87.5% of the time higher transferability than three test-time techniques designed for this purpose. Our work demonstrates that the way to train a surrogate has been overlooked, although it is an important element of transfer-based attacks. We are, therefore, the first to review the effectiveness of several training methods in increasing transferability. We provide new directions to better understand the transferability phenomenon and offer a simple but strong baseline for future work.

Machine learning based surrogate models offer researchers powerful tools for accelerating simulation-based workflows. However, as standard datasets in this space often cover small classes of physical behavior, it can be difficult to evaluate the efficacy of new approaches. To address this gap, we introduce the Well: a large-scale collection of datasets containing numerical simulations of a wide variety of spatiotemporal physical systems. The Well draws from domain experts and numerical software developers to provide 15TB of data across 16 datasets covering diverse domains such as biological systems, fluid dynamics, acoustic scattering, as well as magneto-hydrodynamic simulations of extra-galactic fluids or supernova explosions. These datasets can be used individually or as part of a broader benchmark suite. To facilitate usage of the Well, we provide a unified PyTorch interface for training and evaluating models. We demonstrate the function of this library by introducing example baselines that highlight the new challenges posed by the complex dynamics of the Well. The code and data is available at https://github.com/PolymathicAI/the_well.

Hardware-agnostic strategies for accelerating text-to-image diffusion, such as timestep distillation and feature caching, can reduce inference time without custom kernels or system-level optimization. Among them, multi-resolution generation strategies have recently received broad attention, attaining more than 5x speedup without any training. However, the design of performing upsampling in the latent space, together with the selective modification of partial regions, causes these methods to exhibit noticeable blurring or artifacts. To this end, we propose MrFlow, a training-free multi-resolution acceleration strategy for pretrained flow-matching models built upon a staged low-to-high-resolution pipeline. MrFlow first rapidly generates the main structure at low resolution, then performs super-resolution in the pixel space using a lightweight pretrained GAN-based model, subsequently injects low-strength noise to enable high-frequency resampling, and finally refines the details at high resolution. Quantitative and qualitative results on FLUX.1-dev and Qwen-Image show that MrFlow exploits the quadratic token reduction and reduced step requirement of low-resolution sampling to achieve 10x end-to-end acceleration while keeping OneIG within a 1% gap relative to that before acceleration, significantly surpassing other training-free acceleration strategies, and requiring no training or runtime dynamic identification whatsoever. MrFlow can further be directly combined orthogonally with pre-trained timestep distillation strategies, achieving even higher generation acceleration of up to 25x.

Diffusion models have achieved remarkable success in generative tasks but suffer from high computational costs due to their iterative sampling process and quadratic attention costs. Existing training-free acceleration strategies that reduce per-step computation cost, while effectively reducing sampling time, demonstrate low faithfulness compared to the original baseline. We hypothesize that this fidelity gap arises because (a) different prompts correspond to varying denoising trajectory, and (b) such methods do not consider the underlying ODE formulation and its numerical solution. In this paper, we propose Stability-guided Adaptive Diffusion Acceleration (SADA), a novel paradigm that unifies step-wise and token-wise sparsity decisions via a single stability criterion to accelerate sampling of ODE-based generative models (Diffusion and Flow-matching). For (a), SADA adaptively allocates sparsity based on the sampling trajectory. For (b), SADA introduces principled approximation schemes that leverage the precise gradient information from the numerical ODE solver. Comprehensive evaluations on SD-2, SDXL, and Flux using both EDM and DPM++ solvers reveal consistent ge 1.8times speedups with minimal fidelity degradation (LPIPS leq 0.10 and FID leq 4.5) compared to unmodified baselines, significantly outperforming prior methods. Moreover, SADA adapts seamlessly to other pipelines and modalities: It accelerates ControlNet without any modifications and speeds up MusicLDM by 1.8times with sim 0.01 spectrogram LPIPS.

Rectified-flow-based diffusion transformers, such as FLUX and OpenSora, have demonstrated exceptional performance in the field of image and video generation. Despite their robust generative capabilities, these models often suffer from inaccurate inversion, which could further limit their effectiveness in downstream tasks such as image and video editing. To address this issue, we propose RF-Solver, a novel training-free sampler that enhances inversion precision by reducing errors in the process of solving rectified flow ODEs. Specifically, we derive the exact formulation of the rectified flow ODE and perform a high-order Taylor expansion to estimate its nonlinear components, significantly decreasing the approximation error at each timestep. Building upon RF-Solver, we further design RF-Edit, which comprises specialized sub-modules for image and video editing. By sharing self-attention layer features during the editing process, RF-Edit effectively preserves the structural information of the source image or video while achieving high-quality editing results. Our approach is compatible with any pre-trained rectified-flow-based models for image and video tasks, requiring no additional training or optimization. Extensive experiments on text-to-image generation, image & video inversion, and image & video editing demonstrate the robust performance and adaptability of our methods. Code is available at https://github.com/wangjiangshan0725/RF-Solver-Edit.

In mechanical structures like airplanes, cars and houses, noise is generated and transmitted through vibrations. To take measures to reduce this noise, vibrations need to be simulated with expensive numerical computations. Deep learning surrogate models present a promising alternative to classical numerical simulations as they can be evaluated magnitudes faster, while trading-off accuracy. To quantify such trade-offs systematically and foster the development of methods, we present a benchmark on the task of predicting the vibration of harmonically excited plates. The benchmark features a total of 12,000 plate geometries with varying forms of beadings, material, boundary conditions, load position and sizes with associated numerical solutions. To address the benchmark task, we propose a new network architecture, named Frequency-Query Operator, which predicts vibration patterns of plate geometries given a specific excitation frequency. Applying principles from operator learning and implicit models for shape encoding, our approach effectively addresses the prediction of highly variable frequency response functions occurring in dynamic systems. To quantify the prediction quality, we introduce a set of evaluation metrics and evaluate the method on our vibrating-plates benchmark. Our method outperforms DeepONets, Fourier Neural Operators and more traditional neural network architectures and can be used for design optimization. Code, dataset and visualizations: https://github.com/ecker-lab/Learning_Vibrating_Plates

Diffusion models (DMs) have significantly advanced the development of real-world image super-resolution (Real-ISR), but the computational cost of multi-step diffusion models limits their application. One-step diffusion models generate high-quality images in a one sampling step, greatly reducing computational overhead and inference latency. However, most existing one-step diffusion methods are constrained by the performance of the teacher model, where poor teacher performance results in image artifacts. To address this limitation, we propose FluxSR, a novel one-step diffusion Real-ISR technique based on flow matching models. We use the state-of-the-art diffusion model FLUX.1-dev as both the teacher model and the base model. First, we introduce Flow Trajectory Distillation (FTD) to distill a multi-step flow matching model into a one-step Real-ISR. Second, to improve image realism and address high-frequency artifact issues in generated images, we propose TV-LPIPS as a perceptual loss and introduce Attention Diversification Loss (ADL) as a regularization term to reduce token similarity in transformer, thereby eliminating high-frequency artifacts. Comprehensive experiments demonstrate that our method outperforms existing one-step diffusion-based Real-ISR methods. The code and model will be released at https://github.com/JianzeLi-114/FluxSR.

Parameterizing high-fidelity "digital twins" of batteries is a critical yet challenging inverse problem that hinders the pace of battery innovation. Prevailing methods formulate this as a black-box optimization (BBO) task, employing algorithms that are sample-inefficient and blind to the underlying physics. In this work, we introduce a new paradigm that reframes the inverse problem as a reasoning task, and present Battery-Sim-Agent, the first framework to deploy a Large Language Model (LLM) agent in a closed loop with a high-fidelity battery simulator. The agent mimics a human scientist's workflow: it interprets rich, multi-modal feedback from the simulator, forms physically-grounded hypotheses to explain discrepancies, and proposes structured parameter updates. On a systematically constructed benchmark suite spanning diverse battery chemistries, operating conditions, and difficulty levels, our agent significantly outperforms strong BBO baselines like Bayesian optimization in identifying accurate parameters. We further demonstrate the framework's capability in complex long-horizon degradation fitting tasks and validate its practical applicability on real-world battery datasets. Our results highlight the promise of LLM-agents as reasoning-based optimizers for scientific discovery and battery parameter estimation.

Transformer neural operators have recently become an effective approach for surrogate modeling of systems governed by partial differential equations (PDEs). In this paper, we introduce a modified implicit factorized transformer (IFactFormer-m) model which replaces the original chained factorized attention with parallel factorized attention. The IFactFormer-m model successfully performs long-term predictions for turbulent channel flow, whereas the original IFactFormer (IFactFormer-o), Fourier neural operator (FNO), and implicit Fourier neural operator (IFNO) exhibit a poor performance. Turbulent channel flows are simulated by direct numerical simulation using fine grids at friction Reynolds numbers Re_{tau}approx 180,395,590, and filtered to coarse grids for training neural operator. The neural operator takes the current flow field as input and predicts the flow field at the next time step, and long-term prediction is achieved in the posterior through an autoregressive approach. The results show that IFactFormer-m, compared to other neural operators and the traditional large eddy simulation (LES) methods including dynamic Smagorinsky model (DSM) and the wall-adapted local eddy-viscosity (WALE) model, reduces prediction errors in the short term, and achieves stable and accurate long-term prediction of various statistical properties and flow structures, including the energy spectrum, mean streamwise velocity, root mean square (rms) values of fluctuating velocities, Reynolds shear stress, and spatial structures of instantaneous velocity. Moreover, the trained IFactFormer-m is much faster than traditional LES methods. By analyzing the attention kernels, we elucidate the reasons why IFactFormer-m converges faster and achieves a stable and accurate long-term prediction compared to IFactFormer-o. Code and data are available at: https://github.com/huiyu-2002/IFactFormer-m.

The work focuses on gathering high-fidelity and low-fidelity numerical simulations data using Nektar++ (Solver based on Applied Mathematics) and XFOIL respectively. The utilization of the higher polynomial distribution in calculating the Coefficient of lift and drag has demonstrated superior accuracy and precision. Further, Co-kriging Data fusion and Adaptive sampling technique has been used to obtain the precise data predictions for the lift and drag within the confined domain without conducting the costly simulations on HPC clusters. This creates a methodology to quantifying uncertainty in computational fluid dynamics by minimizing the required number of samples. To minimize the reliability on high-fidelity numerical simulations in Uncertainty Quantification, a multi-fidelity strategy has been adopted. The effectiveness of the multi-fidelity deep neural network model has been validated through the approximation of benchmark functions across 1-, 32-, and 100-dimensional, encompassing both linear and nonlinear correlations. The surrogate modelling results showed that multi-fidelity deep neural network model has shown excellent approximation capabilities for the test functions and multi-fidelity deep neural network method has outperformed Co-kriging in effectiveness. In addition to that, multi-fidelity deep neural network model is utilized for the simulation of aleatory uncertainty propagation in 1-, 32-, and 100 dimensional function test, considering both uniform and Gaussian distributions for input uncertainties. The results have shown that multi-fidelity deep neural network model has efficiently predicted the probability density distributions of quantities of interest as well as the statistical moments with precision and accuracy. The Co-Kriging model has exhibited limitations when addressing 32-Dimension problems due to the limitation of memory capacity for storage and manipulation.

This paper studies the black-box optimization task which aims to find the maxima of a black-box function using a static set of its observed input-output pairs. This is often achieved via learning and optimizing a surrogate function with that offline data. Alternatively, it can also be framed as an inverse modeling task that maps a desired performance to potential input candidates that achieve it. Both approaches are constrained by the limited amount of offline data. To mitigate this limitation, we introduce a new perspective that casts offline optimization as a distributional translation task. This is formulated as learning a probabilistic bridge transforming an implicit distribution of low-value inputs (i.e., offline data) into another distribution of high-value inputs (i.e., solution candidates). Such probabilistic bridge can be learned using low- and high-value inputs sampled from synthetic functions that resemble the target function. These synthetic functions are constructed as the mean posterior of multiple Gaussian processes fitted with different parameterizations on the offline data, alleviating the data bottleneck. The proposed approach is evaluated on an extensive benchmark comprising most recent methods, demonstrating significant improvement and establishing a new state-of-the-art performance. Our code is publicly available at https://github.com/cuong-dm/ROOT.

This paper puts forward an integrated microstructure design methodology that replaces the common existing design approaches: 1) reconstruction of microstructures, 2) analyzing and quantifying material properties, and 3) inverse design of materials using deep-learned generative and surrogate models. The long-standing issue of microstructure reconstruction is well addressed in this study using a new class of state-of-the-art generative model, the diffusion-based generative model (DGM). Moreover, the conditional formulation of DGM for guidance to the embedded desired material properties with a transformer-based attention mechanism enables the inverse design of multifunctional composites. A convolutional neural network (CNN)-based surrogate model is utilized to analyze the nonlinear material behavior to facilitate the prediction of material properties for building microstructure-property linkages. Combined, these generative and surrogate models enable large data processing and database construction that is often not affordable with resource-intensive finite element method (FEM)-based direct numerical simulation (DNS) and iterative reconstruction methods. An example case is presented to demonstrate the effectiveness of the proposed approach, which is designing mechanoluminescence (ML) particulate composites made of europium and dysprosium ions. The results show that the inversely-designed multiple ML microstructure candidates with the proposed generative and surrogate models meet the multiple design requirements (e.g., volume fraction, elastic constant, and light sensitivity). The evaluation of the generated samples' quality and the surrogate models' performance using appropriate metrics are also included. This assessment demonstrates that the proposed integrated methodology offers an end-to-end solution for practical material design applications.

State-of-the-art neural network training methods depend on the gradient of the network function. Therefore, they cannot be applied to networks whose activation functions do not have useful derivatives, such as binary and discrete-time spiking neural networks. To overcome this problem, the activation function's derivative is commonly substituted with a surrogate derivative, giving rise to surrogate gradient learning (SGL). This method works well in practice but lacks theoretical foundation. The neural tangent kernel (NTK) has proven successful in the analysis of gradient descent. Here, we provide a generalization of the NTK, which we call the surrogate gradient NTK, that enables the analysis of SGL. First, we study a naive extension of the NTK to activation functions with jumps, demonstrating that gradient descent for such activation functions is also ill-posed in the infinite-width limit. To address this problem, we generalize the NTK to gradient descent with surrogate derivatives, i.e., SGL. We carefully define this generalization and expand the existing key theorems on the NTK with mathematical rigor. Further, we illustrate our findings with numerical experiments. Finally, we numerically compare SGL in networks with sign activation function and finite width to kernel regression with the surrogate gradient NTK; the results confirm that the surrogate gradient NTK provides a good characterization of SGL.

Methane (CH_4) is the second most powerful greenhouse gas after carbon dioxide and plays a crucial role in climate change due to its high global warming potential. Accurately modeling CH_4 fluxes across the globe and at fine temporal scales is essential for understanding its spatial and temporal variability and developing effective mitigation strategies. In this work, we introduce the first-of-its-kind cross-scale global wetland methane benchmark dataset (X-MethaneWet), which synthesizes physics-based model simulation data from TEM-MDM and the real-world observation data from FLUXNET-CH_4. This dataset can offer opportunities for improving global wetland CH_4 modeling and science discovery with new AI algorithms. To set up AI model baselines for methane flux prediction, we evaluate the performance of various sequential deep learning models on X-MethaneWet. Furthermore, we explore four different transfer learning techniques to leverage simulated data from TEM-MDM to improve the generalization of deep learning models on real-world FLUXNET-CH_4 observations. Our extensive experiments demonstrate the effectiveness of these approaches, highlighting their potential for advancing methane emission modeling and contributing to the development of more accurate and scalable AI-driven climate models.

Deep generative models based on neural differential equations have quickly become the state-of-the-art for numerous generation tasks across many different applications. These models rely on ODE/SDE solvers which integrate from a prior distribution to the data distribution. In many applications it is highly desirable to then integrate in the other direction. The standard solvers, however, accumulate discretization errors which don't align with the forward trajectory, thereby prohibiting an exact inversion. In applications where the precision of the generative model is paramount this inaccuracy in inversion is often unacceptable. Current approaches to solving the inversion of these models results in significant downstream issues with poor stability and low-order of convergence; moreover, they are strictly limited to the ODE domain. In this work, we propose a new family of reversible exponential (stochastic) Runge-Kutta solvers which we refer to as Rex developed by an application of Lawson methods to convert any explicit (stochastic) Runge-Kutta scheme into a reversible one. In addition to a rigorous theoretical analysis of the proposed solvers, we also empirically demonstrate the utility of Rex on improving the sampling of Boltzmann distributions with flow models, and improving image generation and editing capabilities with diffusion models.

Uncertainty is almost ubiquitous in safety-critical autonomous systems due to dynamic environments and the integration of learning-based components. Quantifying this uncertainty--particularly for time-series predictions in multi-stage optimization--is essential for safe control and verification tasks. Conformal Prediction (CP) is a distribution-free uncertainty quantification tool with rigorous finite-sample guarantees, but its performance relies on the design of the nonconformity measure, which remains challenging for time-series data. Existing methods either overfit on small datasets, or are computationally intensive on long-time-horizon problems and/or large datasets. To overcome these issues, we propose a new parameterization of the score functions and formulate an optimization program to compute the associated parameters. The optimal parameters directly lead to norm-ball regions that constitute minimal-average-radius conformal sets. We then provide a reformulation of the underlying optimization program to enable faster computation. We provide theoretical proofs on both the validity and efficiency of predictors constructed based on the proposed approach. Numerical results on various case studies demonstrate that our method outperforms state-of-the-art methods in terms of efficiency, with much lower computational requirements.

We propose constrained causal Bayesian optimization (cCBO), an approach for finding interventions in a known causal graph that optimize a target variable under some constraints. cCBO first reduces the search space by exploiting the graph structure and, if available, an observational dataset; and then solves the restricted optimization problem by modelling target and constraint quantities using Gaussian processes and by sequentially selecting interventions via a constrained expected improvement acquisition function. We propose different surrogate models that enable to integrate observational and interventional data while capturing correlation among effects with increasing levels of sophistication. We evaluate cCBO on artificial and real-world causal graphs showing successful trade off between fast convergence and percentage of feasible interventions.

The ability to resolve complex physical phenomena with high fidelity and at low computational cost is central to addressing key challenges in modern engineering. A prime example lies in hypersonic flows, where the precise prediction of the full flowfield topology, in particular with respect to shock wave location and intensity, is critical. Yet supersonic and hypersonic flows continue to be a stumbling block for traditional reduced-order models and neural emulators that struggle to capture steep gradients in flow states with physical consistency in applications of industrial relevance. To that end, we introduce a fully GPU based workflow that integrates accelerated data generation with the training of neural emulators augmented by uncertainty quantification and physics-aware refinement. Our workflow is enabled by a differentiable high-fidelity solver (JAX-Fluids) which we employ for rapid dataset creation and residual-based improvement of the neural emulator to enhance physical consistency. Building on this framework, we first present a suite of model architectures and analyze their scaling behavior to expose their strengths and shortcomings. We then show that residual-based refinement enables training on cases where only mesh and input parameters are available, substantially reducing residuals and improving physical consistency. Together, differentiable simulation and residual-based refinement yield physics emulators that remain reliable beyond their training distribution, a key requirement for deploying surrogates in real-world engineering design loops.

The push for efficient text to image synthesis has moved the field toward one step sampling, yet existing methods still face a three way tradeoff among fidelity, inference speed, and training efficiency. Approaches that rely on external discriminators can sharpen one step performance, but they often introduce training instability, high GPU memory overhead, and slow convergence, which complicates scaling and parameter efficient tuning. In contrast, regression based distillation and consistency objectives are easier to optimize, but they typically lose fine details when constrained to a single step. We present APEX, built on a key theoretical insight: adversarial correction signals can be extracted endogenously from a flow model through condition shifting. Using a transformation creates a shifted condition branch whose velocity field serves as an independent estimator of the model's current generation distribution, yielding a gradient that is provably GAN aligned, replacing the sample dependent discriminator terms that cause gradient vanishing. This discriminator free design is architecture preserving, making APEX a plug and play framework compatible with both full parameter and LoRA based tuning. Empirically, our 0.6B model surpasses FLUX-Schnell 12B (20times more parameters) in one step quality. With LoRA tuning on Qwen-Image 20B, APEX reaches a GenEval score of 0.89 at NFE=1 in 6 hours, surpassing the original 50-step teacher (0.87) and providing a 15.33times inference speedup. Code is available https://github.com/LINs-lab/APEX.

How areas of land are allocated for different uses, such as forests, urban areas, and agriculture, has a large effect on the terrestrial carbon balance, and therefore climate change. Based on available historical data on land-use changes and a simulation of the associated carbon emissions and removals, a surrogate model can be learned that makes it possible to evaluate the different options available to decision-makers efficiently. An evolutionary search process can then be used to discover effective land-use policies for specific locations. Such a system was built on the Project Resilience platform and evaluated with the Land-Use Harmonization dataset LUH2 and the bookkeeping model BLUE. It generates Pareto fronts that trade off carbon impact and amount of land-use change customized to different locations, thus providing a proof-of-concept tool that is potentially useful for land-use planning.

Guidance of generative models is typically achieved by modifying the probability flow vector field through the addition of a guidance field. In this paper, we instead propose the Source-Guided Flow Matching (SGFM) framework, which modifies the source distribution directly while keeping the pre-trained vector field intact. This reduces the guidance problem to a well-defined problem of sampling from the source distribution. We theoretically show that SGFM recovers the desired target distribution exactly. Furthermore, we provide bounds on the Wasserstein error for the generated distribution when using an approximate sampler of the source distribution and an approximate vector field. The key benefit of our approach is that it allows the user to flexibly choose the sampling method depending on their specific problem. To illustrate this, we systematically compare different sampling methods and discuss conditions for asymptotically exact guidance. Moreover, our framework integrates well with optimal flow matching models since the straight transport map generated by the vector field is preserved. Experimental results on synthetic 2D benchmarks, physics-informed generative tasks, and imaging inverse problems demonstrate the effectiveness and flexibility of the proposed framework.

High-fidelity simulations and complex inverse problems, such as detector modeling and unfolding, are computationally intensive bottlenecks across subatomic physics, yet essential for accurate physical interpretation. While Conditional Flow Matching (CFM) offers a robust acceleration approach, we demonstrate its standard training loss is fundamentally misleading. Specifically, utilizing a Jefferson Lab Nuclear Physics (NP) kinematic dataset (γp to ρ^0 p to π^+π^- p), we expose that CFM loss plateaus prematurely, obscuring ongoing physical refinement. To verify this disconnect is a dataset-agnostic pathology, we introduce ScatterPrism, an efficient generative surrogate evaluated against both the NP data and synthetic stress tests modeling challenging 1D distribution topologies. Coupling these benchmarks, we establish that physics-informed metrics continue improving long after standard loss converges. Consequently, we propose a multi-metric diagnostic protocol to ensure true kinematic fidelity without data memorization. Driven by NP challenges relevant to the forthcoming Electron-Ion Collider (EIC), this unified machinery has strong potential to extend to High-Energy Physics (HEP) applications, such as jet modeling. Furthermore, the framework holds promise for broader domains requiring rigorous generative reliability, including medical imaging, astrophysics, and quantitative finance.

FSampler is a training free, sampler agnostic execution layer that accelerates diffusion sampling by reducing the number of function evaluations (NFE). FSampler maintains a short history of denoising signals (epsilon) from recent real model calls and extrapolates the next epsilon using finite difference predictors at second order, third order, or fourth order, falling back to lower order when history is insufficient. On selected steps the predicted epsilon substitutes the model call while keeping each sampler's update rule unchanged. Predicted epsilons are validated for finiteness and magnitude; a learning stabilizer rescales predictions on skipped steps to correct drift, and an optional gradient estimation stabilizer compensates local curvature. Protected windows, periodic anchors, and a cap on consecutive skips bound deviation over the trajectory. Operating at the sampler level, FSampler integrates with Euler/DDIM, DPM++ 2M/2S, LMS/AB2, and RES family exponential multistep methods and drops into standard workflows. FLUX.1 dev, Qwen Image, and Wan 2.2, FSampler reduces time by 8 to 22% and model calls by 15 to 25% at high fidelity (Structural Similarity Index (SSIM) 0.95 to 0.99), without altering sampler formulas. With an aggressive adaptive gate, reductions can reach 45 to 50% fewer model calls at lower fidelity (SSIM 0.73 to 0.74).

In recent years, applying deep learning to solve physics problems has attracted much attention. Data-driven deep learning methods produce fast numerical operators that can learn approximate solutions to the whole system of partial differential equations (i.e., surrogate modeling). Although these neural networks may have lower accuracy than traditional numerical methods, they, once trained, are orders of magnitude faster at inference. Hence, one crucial feature is that these operators can generalize to unseen PDE parameters without expensive re-training.In this paper, we construct CFDBench, a benchmark tailored for evaluating the generalization ability of neural operators after training in computational fluid dynamics (CFD) problems. It features four classic CFD problems: lid-driven cavity flow, laminar boundary layer flow in circular tubes, dam flows through the steps, and periodic Karman vortex street. The data contains a total of 302K frames of velocity and pressure fields, involving 739 cases with different operating condition parameters, generated with numerical methods. We evaluate the effectiveness of popular neural operators including feed-forward networks, DeepONet, FNO, U-Net, etc. on CFDBnech by predicting flows with non-periodic boundary conditions, fluid properties, and flow domain shapes that are not seen during training. Appropriate modifications were made to apply popular deep neural networks to CFDBench and enable the accommodation of more changing inputs. Empirical results on CFDBench show many baseline models have errors as high as 300% in some problems, and severe error accumulation when performing autoregressive inference. CFDBench facilitates a more comprehensive comparison between different neural operators for CFD compared to existing benchmarks.

Though Rectified Flows (ReFlows) with distillation offers a promising way for fast sampling, its fast inversion transforms images back to structured noise for recovery and following editing remains unsolved. This paper introduces FireFlow, a simple yet effective zero-shot approach that inherits the startling capacity of ReFlow-based models (such as FLUX) in generation while extending its capabilities to accurate inversion and editing in 8 steps. We first demonstrate that a carefully designed numerical solver is pivotal for ReFlow inversion, enabling accurate inversion and reconstruction with the precision of a second-order solver while maintaining the practical efficiency of a first-order Euler method. This solver achieves a 3times runtime speedup compared to state-of-the-art ReFlow inversion and editing techniques, while delivering smaller reconstruction errors and superior editing results in a training-free mode. The code is available at https://github.com/HolmesShuan/FireFlow{this URL}.

Developing accurate models for chemical reactors is often challenging due to the complexity of reaction kinetics and process dynamics. Traditional approaches require retraining models for each new system, limiting generalizability and efficiency. In this work, we take a step toward foundation models for chemical reactor modeling by introducing a neural network framework that generalizes across diverse reactor types and rapidly adapts to new chemical processes. Our approach leverages meta-learning to pretrain the model on a broad set of reactor dynamics, enabling efficient adaptation to unseen reactions with minimal data. To further enhance generalizability, we incorporate physics-informed fine-tuning, ensuring physically consistent adaptation to new reactor conditions. Our framework is evaluated across three integer-order fundamental reactor types - continuous stirred tank reactors, batch reactors, and plug flow reactors - demonstrating superior few-shot adaptation compared to conventional data-driven, physics-informed, and transfer learning approaches. By combining meta-learning with physics-informed adaptation, this work lays the foundation for a generalizable modeling framework, advancing the development of foundation models for chemical engineering applications. Source code is available at https://github.com/killingbear999/chemical-reactor-foundation-model.

Global solar photospheric magnetic maps play a critical role in solar and heliospheric physics research. Routine magnetograph measurements of the field occur only along the Sun-Earth line, leaving the far-side of the Sun unobserved. Surface Flux Transport (SFT) models attempt to mitigate this by modeling the surface evolution of the field. While such models have long been established in the community (with several releasing public full-Sun maps), none are open source. The Open Source Flux Transport (OFT) model seeks to fill this gap by providing an open and user-extensible SFT model that also builds on the knowledge of previous models with updated numerical and data acquisition/assimilation methods along with additional user-defined features. In this first of a series of papers on OFT, we introduce its computational core: the High-performance Flux Transport (HipFT) code (github.com/predsci/hipft). HipFT implements advection, diffusion, and data assimilation in a modular design that supports a variety of flow models and options. It can compute multiple realizations in a single run across model parameters to create ensembles of maps for uncertainty quantification and is high-performance through the use of multi-CPU and multi-GPU parallelism. HipFT is designed to enable users to easily write extensions, enhancing its flexibility and adaptability. We describe HipFT's model features, validations of its numerical methods, performance of its parallel and GPU-accelerated code implementation, analysis/post-processing options, and example use cases.

We present a novel approach to integrating scientific knowledge into generative models, enhancing their realism and consistency in image synthesis. First, we introduce Science-T2I, an expert-annotated adversarial dataset comprising adversarial 20k image pairs with 9k prompts, covering wide distinct scientific knowledge categories. Leveraging Science-T2I, we present SciScore, an end-to-end reward model that refines the assessment of generated images based on scientific knowledge, which is achieved by augmenting both the scientific comprehension and visual capabilities of pre-trained CLIP model. Additionally, based on SciScore, we propose a two-stage training framework, comprising a supervised fine-tuning phase and a masked online fine-tuning phase, to incorporate scientific knowledge into existing generative models. Through comprehensive experiments, we demonstrate the effectiveness of our framework in establishing new standards for evaluating the scientific realism of generated content. Specifically, SciScore attains performance comparable to human-level, demonstrating a 5% improvement similar to evaluations conducted by experienced human evaluators. Furthermore, by applying our proposed fine-tuning method to FLUX, we achieve a performance enhancement exceeding 50% on SciScore.

Temporal credit assignment in reinforcement learning is often approached by introducing value estimates at multiple discount factors. A natural next step is to let the actor dynamically route among these temporal heads, using either differentiable attention or heuristic uncertainty weights. This paper argues that such routing can create a numerical shortcut rather than a reliable temporal abstraction. We study this issue in a controlled PPO setting on LunarLander-v2, using the environment as a visual sandbox for diagnosing failure modes. First, we formalize Surrogate Objective Hacking: a differentiable softmax router exposed to the PPO surrogate receives a direct gradient toward advantage heads that are numerically favorable for the current update, even when this routing change does not correspond to improved physical control. Because unnormalized advantages at different discount factors have different effective scales, this creates a scale-discrepancy vulnerability. Second, we identify the Paradox of Temporal Uncertainty in gradient-free error-based routing: short-horizon heads can receive the largest routing share because their prediction targets are easier, even when they are less aligned with delayed task success. As a structural response, we study Target Decoupling: the critic may retain multi-timescale auxiliary heads, but the actor is updated only with the long-horizon advantage. Target Decoupling is not presented as a broad performance booster; in this run set it removes the exploitable actor-side routing pathway and improves the observed worst-seed return. Code is available at https://github.com/ben-dlwlrma/Representation-Over-Routing.

Aligning streaming autoregressive (AR) video generators with human preferences is challenging. Existing reinforcement learning methods predominantly rely on noise-based exploration and SDE-based surrogate policies that are mismatched to the deterministic ODE dynamics of distilled AR models, and tend to perturb low-level appearance rather than the high-level semantic storyline progression critical for long-horizon coherence. To address these limitations, we present KVPO, an ODE-native online Group Relative Policy Optimization (GRPO) framework for aligning streaming video generators. For diversity exploration, KVPO introduces a causal-semantic exploration paradigm that relocates the source of variation from stochastic noise to the historical KV cache. By stochastically routing historical KV entries, it constructs semantically diverse generation branches that remain strictly on the data manifold. For policy modeling, KVPO introduces a velocity-field surrogate policy based on Trajectory Velocity Energy (TVE), which quantifies branch likelihood in flow-matching velocity space and yields a reward-weighted contrastive objective fully consistent with the native ODE formulation. Experiments on multiple distilled AR video generators demonstrate consistent gains in visual quality, motion quality, and text-video alignment across both single-prompt short-video and multi-prompt long-video settings.

Diffusion models (DMs) excel in photorealism, image editing, and solving inverse problems, aided by classifier-free guidance and image inversion techniques. However, rectified flow models (RFMs) remain underexplored for these tasks. Existing DM-based methods often require additional training, lack generalization to pretrained latent models, underperform, and demand significant computational resources due to extensive backpropagation through ODE solvers and inversion processes. In this work, we first develop a theoretical and empirical understanding of the vector field dynamics of RFMs in efficiently guiding the denoising trajectory. Our findings reveal that we can navigate the vector field in a deterministic and gradient-free manner. Utilizing this property, we propose FlowChef, which leverages the vector field to steer the denoising trajectory for controlled image generation tasks, facilitated by gradient skipping. FlowChef is a unified framework for controlled image generation that, for the first time, simultaneously addresses classifier guidance, linear inverse problems, and image editing without the need for extra training, inversion, or intensive backpropagation. Finally, we perform extensive evaluations and show that FlowChef significantly outperforms baselines in terms of performance, memory, and time requirements, achieving new state-of-the-art results. Project Page: https://flowchef.github.io.

When training deep learning models, the performance depends largely on the selected hyperparameters. However, hyperparameter optimization (HPO) is often one of the most expensive parts of model design. Classical HPO methods treat this as a black-box optimization problem. However, gray-box HPO methods, which incorporate more information about the setup, have emerged as a promising direction for more efficient optimization. For example, using intermediate loss evaluations to terminate bad selections. In this work, we propose an HPO method for neural networks using logged checkpoints of the trained weights to guide future hyperparameter selections. Our method, Forecasting Model Search (FMS), embeds weights into a Gaussian process deep kernel surrogate model, using a permutation-invariant graph metanetwork to be data-efficient with the logged network weights. To facilitate reproducibility and further research, we open-source our code at https://github.com/NVlabs/forecasting-model-search.

Optimization analyses for cross-entropy training rely on local Taylor models of the loss to predict whether a proposed step will decrease the objective. These surrogates are reliable only inside the Taylor convergence radius of the true loss along the update direction. That radius is set not by real-line curvature alone but by the nearest complex singularity. For cross-entropy, the softmax partition function F=sum_j exp(z_j) has complex zeros -- ``ghosts of softmax'' -- that induce logarithmic singularities in the loss and cap this radius. To make this geometry usable, we derive closed-form expressions under logit linearization along the proposed update direction. In the binary case, the exact radius is ρ^*=δ^2+ π^2/Δ_a. In the multiclass case, we obtain the lower bound ρ_a=π/Δ_a, where Δ_a=max_k a_k-min_k a_k is the spread of directional logit derivatives a_k=nabla z_kcdot v. This bound costs one Jacobian-vector product and reveals what makes a step fragile: samples that are both near a decision flip and highly sensitive to the proposed direction tighten the radius. The normalized step size r=τ/ρ_a separates safe from dangerous updates. Across six tested architectures and multiple step directions, no model fails for r<1, yet collapse appears once rge 1. Temperature scaling confirms the mechanism: normalizing by ρ_a shrinks the onset-threshold spread from standard deviation 0.992 to 0.164. A controller that enforces τleρ_a survives learning-rate spikes up to 10{,} 000times in our tests, where gradient clipping still collapses. Together, these results identify a geometric constraint on cross-entropy optimization that operates through Taylor convergence rather than Hessian curvature.

When solving inverse problems, it is increasingly popular to use pre-trained diffusion models as plug-and-play priors. This framework can accommodate different forward models without re-training while preserving the generative capability of diffusion models. Despite their success in many imaging inverse problems, most existing methods rely on privileged information such as derivative, pseudo-inverse, or full knowledge about the forward model. This reliance poses a substantial limitation that restricts their use in a wide range of problems where such information is unavailable, such as in many scientific applications. To address this issue, we propose Ensemble Kalman Diffusion Guidance (EnKG) for diffusion models, a derivative-free approach that can solve inverse problems by only accessing forward model evaluations and a pre-trained diffusion model prior. We study the empirical effectiveness of our method across various inverse problems, including scientific settings such as inferring fluid flows and astronomical objects, which are highly non-linear inverse problems that often only permit black-box access to the forward model.

In computer-aided engineering design, the goal of a designer is to find an optimal design on a given requirement using the numerical simulator in loop with an optimization method. In this design optimization process, a good design optimization process is one that can reduce the time from inception to design. In this work, we take a class of design problem, that is computationally cheap to evaluate but has high dimensional design space. In such cases, traditional surrogate-based optimization does not offer any benefits. In this work, we propose an alternative way to use ML model to surrogate the design process that formulates the search problem as an inverse problem and can save time by finding the optimal design or at least a good initial seed design for optimization. By using this trained surrogate model with the traditional optimization method, we can get the best of both worlds. We call this as Surrogate Assisted Optimization (SAO)- a hybrid approach by mixing ML surrogate with the traditional optimization method. Empirical evaluations of propeller design problems show that a better efficient design can be found in fewer evaluations using SAO.

Data-driven surrogate models are an alternative to numerical homogenization of heterogeneous materials. In this contribution, a supervised learning approach is presented for predicting effective Lamé parameters of hyperelastic composites from low-dimensional microstructural descriptors. The data set is based on previously published numerical homogenization results for ensembles of two-phase stochastic microstructures generated by planar Boolean models, covering variations of inclusion shape, phase contrast, and area fraction; see Brändel, Brands, Maike, Rheinbach, Schröder, Schwarz and Stoyan (2022). A neural network is trained on combinations of scalar and curve-valued statistical descriptors, including the area fraction, a derived scalar shape descriptor τ, the two-point correlation function S_2(r), and the lineal-path function ell(z). Additional data representing limiting cases of the parameter space are incorporated to stabilize training and improve extrapolation behavior. The surrogate is evaluated by leave-one-grain-type-out cross-validation in order to assess generalization to unseen grain geometries. Numerical results demonstrate that additional descriptors can reduce relative errors. A predictor trained with τ and S_2(r) provides a compact representation with good quantitative accuracy and regular dense response behavior. Adding the lineal-path function ell(z) further reduces the error at the available data points, indicating that it is a promising additional descriptor; however, dense post-training response evaluations show that improved pointwise accuracy does not automatically guarantee physically admissible behavior between sampled parameter values. This motivates future work on physically constrained surrogate models, loss formulations, bounded output parametrizations, and a more systematic representation of curve-valued geometric descriptors.

Every call to an LLM classification endpoint produces a labeled input-output pair already retained in production logs. These pairs constitute a free, growing training set: a lightweight surrogate trained on them can absorb a significant portion of future traffic at near-zero marginal inference cost. The open questions are when the surrogate is reliable enough to deploy, what it handles versus defers, and how that boundary evolves as data accumulates. We introduce TRACER (Trace-based Adaptive Cost-Efficient Routing), an open-source system that trains ML surrogates on an LLM's own production traces and governs deployment through a parity gate: the surrogate is activated only when its agreement with the LLM exceeds a user-specified threshold α. To make the routing boundary transparent, TRACER generates interpretability artifacts describing which input regions the surrogate handles, where it plateaus, and why it defers. On a 77-class intent benchmark with a Sonnet 4.6 teacher, TRACER achieves 83-100% surrogate coverage depending on the quality target α; on a 150-class benchmark, the surrogate fully replaces the teacher. On a natural language inference task, the parity gate correctly refuses deployment because the embedding representation cannot support reliable separation. The system is available as open-source software.

We introduce a multi-fidelity estimator of covariance matrices that employs the log-Euclidean geometry of the symmetric positive-definite manifold. The estimator fuses samples from a hierarchy of data sources of differing fidelities and costs for variance reduction while guaranteeing definiteness, in contrast with previous approaches. The new estimator makes covariance estimation tractable in applications where simulation or data collection is expensive; to that end, we develop an optimal sample allocation scheme that minimizes the mean-squared error of the estimator given a fixed budget. Guaranteed definiteness is crucial to metric learning, data assimilation, and other downstream tasks. Evaluations of our approach using data from physical applications (heat conduction, fluid dynamics) demonstrate more accurate metric learning and speedups of more than one order of magnitude compared to benchmarks.

Accurate forecasting of electrical demand is essential for maintaining a stable and reliable power grid, optimizing the allocation of energy resources, and promoting efficient energy consumption practices. This study investigates the effectiveness of five hyperparameter optimization (HPO) algorithms -- Random Search, Covariance Matrix Adaptation Evolution Strategy (CMA--ES), Bayesian Optimization, Partial Swarm Optimization (PSO), and Nevergrad Optimizer (NGOpt) across univariate and multivariate Short-Term Load Forecasting (STLF) tasks. Using the Panama Electricity dataset (n=48,049), we evaluate HPO algorithms' performances on a surrogate forecasting algorithm, XGBoost, in terms of accuracy (i.e., MAPE, R^2) and runtime. Performance plots visualize these metrics across varying sample sizes from 1,000 to 20,000, and Kruskal--Wallis tests assess the statistical significance of the performance differences. Results reveal significant runtime advantages for HPO algorithms over Random Search. In univariate models, Bayesian optimization exhibited the lowest accuracy among the tested methods. This study provides valuable insights for optimizing XGBoost in the STLF context and identifies areas for future research.

Diffusion models have become the dominant tool for high-fidelity image and video generation, yet are critically bottlenecked by their inference speed due to the numerous iterative passes of Diffusion Transformers. To reduce the exhaustive compute, recent works resort to the feature caching and reusing scheme that skips network evaluations at selected diffusion steps by using cached features in previous steps. However, their preliminary design solely relies on local approximation, causing errors to grow rapidly with large skips and leading to degraded sample quality at high speedups. In this work, we propose spectral diffusion feature forecaster (Spectrum), a training-free approach that enables global, long-range feature reuse with tightly controlled error. In particular, we view the latent features of the denoiser as functions over time and approximate them with Chebyshev polynomials. Specifically, we fit the coefficient for each basis via ridge regression, which is then leveraged to forecast features at multiple future diffusion steps. We theoretically reveal that our approach admits more favorable long-horizon behavior and yields an error bound that does not compound with the step size. Extensive experiments on various state-of-the-art image and video diffusion models consistently verify the superiority of our approach. Notably, we achieve up to 4.79times speedup on FLUX.1 and 4.67times speedup on Wan2.1-14B, while maintaining much higher sample quality compared with the baselines.

Inverse design refers to the problem of optimizing the input of an objective function in order to enact a target outcome. For many real-world engineering problems, the objective function takes the form of a simulator that predicts how the system state will evolve over time, and the design challenge is to optimize the initial conditions that lead to a target outcome. Recent developments in learned simulation have shown that graph neural networks (GNNs) can be used for accurate, efficient, differentiable estimation of simulator dynamics, and support high-quality design optimization with gradient- or sampling-based optimization procedures. However, optimizing designs from scratch requires many expensive model queries, and these procedures exhibit basic failures on either non-convex or high-dimensional problems.In this work, we show how denoising diffusion models (DDMs) can be used to solve inverse design problems efficiently and propose a particle sampling algorithm for further improving their efficiency. We perform experiments on a number of fluid dynamics design challenges, and find that our approach substantially reduces the number of calls to the simulator compared to standard techniques.