shrew-ocr-preview-GPTQ-8bit

shrew-ocr-preview converts one document page image per request into a single JSON object containing document metadata, a summary, self-contained semantic chunks (sized for RAG ingestion, not raw OCR lines), and figures/tables with bounding boxes and HTML. A text modality accepts HTML/markdown/plain-text input and produces the same output schema.

GPTQ-8bit quantization of shrew-ocr-preview (fine-tuned from ibm-granite/granite-vision-4.1-4b). Only the language model is quantized (INT8, sym, group_size 32, desc_act=False); the vision tower and projectors remain bf16 — which matches the fine-tune exactly, since all adaptation lives in the language blocks. Quantized with GPTQModel 6.0.3 (FOEM error compensation, MSE-tuned, 176 calibration sequences half document-extraction / half general text, up to 8k tokens). Measured cost of quantization (v0.3): a 215-page product-path parity card against the bf16 model — first-pass clean 92.6 % vs 93.5 %, empty pages 6.5 % vs 5.6 % (two pages, inside the same-weights re-run noise), text similarity median 1.000 on pages both arms parsed, section_type agreement 0.986 — all pre-registered criteria met. v0.2 measured +0.25 % domain perplexity for the same recipe. Measured benefit: ~1.8× serving throughput and a 4.9 GB footprint that fits a 12 GB card (7.9 GB VRAM idle with --gpu-memory-utilization 0.85 --max-num-seqs 4).

Preview release. Works well on mainstream printed documents (papers, reports, filings, manuals). Known failure modes are listed under Limitations; measured results under Results. Weights are updated in place under this name — pin a commit (revision=) or the release tag (v0.3) for reproducibility.

Output schema

One request = one page. The model returns exactly one JSON object, five keys always present:

{
  "metadata":        {"title", "authors" (list), "organization", "year", "doc_type"} — null where unknown,
  "summary":         str | null,
  "semantic_chunks": [{"chunk_id", "title", "content",
                       "section_type" ∈ the 36-value taxonomy below}],
  "figures":         [{"bbox": [x0,y0,x1,y1] | null, "caption", "description"}],
  "tables":          [{"html": "<table>…", "bbox": [...] | null, "caption", "description"}]
}

Bounding boxes are xyxy on a 0–1000 normalized grid over the page image. In text modality, bboxes are null. section_type (v0.3) is one of 36 trained values — document structure (abstract, introduction, methodology, results, discussion, conclusion, appendix, technical_content), generic page text (body, table_text, list), newspaper/magazine regions (news_article, news_brief, news_analysis, feature_article, opinion, commentary, editorial, preview, preview_list, headline, header, masthead, title, footer, index, photo_caption, photo_feature, stat_box, sidebar, advertisement, legal_notice, official_document, obituary, weather_box) and the fallback other. Consumers that validate section_type must accept this set (v0.2 emitted only the first eight); shrew-server ≥ 0.3.14 does, and folds any stray label onto it instead of failing the page.

Usage

Recommended path: shrew-server (MIT, pin tag v0.3.14 or later — earlier servers reject this model's section_type labels), the reference server for this model. It implements the model's entire input contract server-side — glyph-routed bucket preprocessing, the structured_extraction request shape, tuned decoding with a schema-enforced retry tier, the streaming repetition guard, schema/coercion gates, and multi-page assembly. POST a PDF, receive structured JSON. It does not serve the model itself; point it at an OpenAI-compatible endpoint (vLLM, below — note the GPTQ-specific flags in the serving section):

vllm serve btbtyler09/shrew-ocr-preview-GPTQ-8bit --trust-remote-code --dtype half \
  --served-model-name shrew-ocr-preview \
  --max-model-len 32768 --limit-mm-per-prompt '{"image":1}' --no-enable-prefix-caching
VLM_URL=http://localhost:8000 VLM_MODEL=shrew-ocr-preview shrew serve
curl -X POST localhost:8080/v1/convert -F file=@doc.pdf -F pipeline_mode=structured

Full instructions, including a Docker Compose quickstart, are in the repo README under "Using with shrew-ocr-preview (recommended)".

For direct integration without shrew-server, the requirements below define the input contract. Deviating from any of these degrades output quality:

1. System prompt. Set the system prompt to the literal string structured_extraction. Do not send instruction text; the model was trained on this fixed prompt only.

2. Decoding. Set temperature to 0 and max_tokens to 20000. presence_penalty 0.3–0.6 is measured fidelity-neutral; 0.3 is the reference server's first-pass default. Do not set top_p or any other penalty parameter (measured basis under the repetition guard below). Serve with context length ≥ 32768; dense pages need room for both the image tokens and a long completion.

3. Input resolution ("buckets"). Resize each page image to one of three portrait tile grids, selected by the page's measured glyph height (target ~10 px after resize). Training used exactly this routing. Reference implementation:

import cv2, statistics
import numpy as np
from PIL import Image

BUCKETS = [("B1", (1152, 1536)), ("B2", (1536, 2304)), ("B3", (2304, 3072))]
SQUARE = ("B0", (1152, 1152))            # square-ish inputs only (e.g. table crops)

def glyph_height(img, max_side=2600):
    """Median connected-component height in native px — the routing signal."""
    W, H = img.size
    s = min(1.0, max_side / max(W, H))
    im = img.convert("L")
    if s < 1.0:
        im = im.resize((int(W * s), int(H * s)), Image.BOX)
    g = cv2.adaptiveThreshold(np.asarray(im), 255, cv2.ADAPTIVE_THRESH_GAUSSIAN_C,
                              cv2.THRESH_BINARY_INV, 31, 10)
    n, _, stats, _ = cv2.connectedComponentsWithStats(g, connectivity=8)
    hs = [stats[i][3] for i in range(1, n)
          if 2 <= stats[i][3] <= 60 and 1 <= stats[i][2] <= 60 and stats[i][4] >= 4
          and 0.08 <= stats[i][2] / max(stats[i][3], 1) <= 6.0]
    return statistics.median(hs) / max(s, 1e-6) if len(hs) >= 50 else None

def prepare_page(img, target=10.0):
    """Route to the smallest bucket that reaches ~10px effective glyph height, then enhance."""
    w, h = img.size
    if h and 0.9 <= w / h <= 1.15:
        bw, bh = SQUARE[1]
    else:
        g = glyph_height(img)
        bw, bh = BUCKETS[1][1]                       # default when unmeasurable
        if g:
            for _, (cw, ch) in BUCKETS:
                if g * min(cw / w, ch / h) >= target * 0.95:
                    bw, bh = cw, ch
                    break
            else:
                bw, bh = BUCKETS[-1][1]
    s = min(bw / w, bh / h)
    fit = img.resize((round(w * s), round(h * s)), Image.LANCZOS)
    gray = np.asarray(fit.convert("L"))
    e = cv2.createCLAHE(clipLimit=2.0, tileGridSize=(8, 8)).apply(gray)   # CLAHE
    blur = cv2.GaussianBlur(e, (0, 0), 1.2)
    e = cv2.addWeighted(e, 1.8, blur, -0.8, 0)                            # unsharp
    return Image.fromarray(e).convert("RGB")

The checkpoint's config.json and preprocessor_config.json carry the matching image_grid_pinpoints. Do not remove or modify them; the tile packing must match training.

Serving with vLLM

vllm serve /path/to/shrew-ocr-preview-GPTQ-8bit \
  --trust-remote-code --dtype half \
  --served-model-name shrew-ocr-preview \
  --max-model-len 32768 --limit-mm-per-prompt '{"image":1}' \
  --no-enable-prefix-caching

Use --dtype half, not bfloat16: the fast GPTQ kernel path is fp16-only, and fp16 was measured output-neutral for this model. vLLM detects the mixed-precision layout from the checkpoint automatically — the bf16 vision tower loads unquantized with no extra configuration. Requires a vLLM version whose GPTQ support covers multimodal models with partially-quantized checkpoints (v0.27+).

Scaling note: the model is small (2–5 GB weights). For batch serving on multi-GPU hosts, data-parallel replicas (--data-parallel-size N) outperform tensor parallelism substantially (+54% measured on a 4-GPU node) — prefer DP unless a single GPU cannot hold the weights. On memory-constrained GPUs keep --max-num-batched-tokens at 2048 or below: the vision encoder batches image tiles, and large prefill budgets can OOM the tower on high-tile pages.

Request shape (OpenAI-compatible):

{
  "model": "shrew-ocr-preview",
  "temperature": 0,
  "max_tokens": 20000,
  "messages": [
    {"role": "system", "content": "structured_extraction"},
    {"role": "user", "content": [
      {"type": "image_url", "image_url": {"url": "data:image/png;base64,<prepare_page output>"}},
      {"type": "text", "text": "Extract the structured representation of this document page."}]}
  ]
}

Recommended: streaming repetition guard. On hard pages the failure mode is degenerate repetition, not plausible-but-wrong output. Stream the completion, compute len(window)/len(zlib.compress(window)) over a trailing ~2,000-character window every ~800 characters, and abort after 2 consecutive windows above ~15. Clean pages measure ~2; looping output exceeds 25.

Penalty parameters (measured: 900 first-pass runs, 150 stratified pages × 6 decode arms on the production stack): presence_penalty 0.3 at first pass raised the first-pass success rate (valid JSON passing all schema and degeneration gates, no retry) 0.880→0.887 with extraction precision flat (0.949→0.949 median 10-gram precision vs ground truth), and is the reference server's first-pass default; 0.3–0.6 both measured fidelity-neutral on healthy pages. In a separate rescue experiment, a penalized retry (presence_penalty 0.6) recovered 12/12 sampled loop-failed Latin-script broadsheet pages with fidelity flat; dense non-Latin broadsheets did not recover at any penalty (see Limitations — that class is a training gap, not a decoding one). Do not use frequency or repetition penalties or no_repeat_ngram_size: ngram blocking suppresses JSON tokens that must repeat ("bbox": [); frequency penalties accumulate with each repeated occurrence, and repetition penalties apply to every previously-seen token — both degrade required schema tokens in long structured outputs. Do not use grammar-constrained (schema-enforced) decoding at first pass: it degrades table transcription severely (table one-shot 0.975→0.225), primarily by overrunning the token budget mid-table (grammar-constrained decoding transcribes exhaustively), with degraded table fidelity (0.483→0.280) on the pages that do finish; the reference server applies enforcement only on retry. Two caveats: the Results tables were measured with penalty-free greedy decoding (the presence-penalty recommendation comes from the separate decode matrix), and retry rescue was validated on Latin-script pages only — for pages whose text the vision tower cannot resolve, a penalized retry can convert a detectable loop into plausible hallucination (observed: a penalized retry on an unsupported-script page produced fluent output with zero n-gram overlap with the page), so validate retry output with the same window check and schema gates and mark it lower-confidence downstream.

Which borderline pages loop is sensitive to serving numerics (tensor- vs data-parallel layout, torch.compile, kernel changes); in our measurements loop-page identities changed across serve configs while the overall loop rate stayed constant. Compare deployments by loop rate over a fixed page set, not by which pages failed.

Text modality

The same model accepts born-digital text — HTML (emails, filings), markdown, source code, plain text — and returns the same 5-key output schema with figures[].bbox and tables[].bbox null. Do not route OCR output of scanned pages here; scanned pages go through the image modality.

Request shape: same envelope, with the raw content as a single text part in place of the image. Send the content as-is — no wrapper, no instructions, no cleaning:

{
  "model": "shrew-ocr-preview",
  "temperature": 0,
  "max_tokens": 12000,
  "messages": [
    {"role": "system", "content": "structured_extraction"},
    {"role": "user", "content": [{"type": "text", "text": "<raw HTML / markdown / plain text>"}]}
  ]
}

Input sizing: send 2,000–9,000 characters (~500–2,500 tokens) per request; treat 13,000 characters as the ceiling (training inputs never exceeded it). Split longer documents at structural boundaries (headings, sections) and send one request per section. Each request in the recommended range yields roughly 2–6 semantic chunks (median chunk ~820 characters).

Results — OHR-Bench document RAG

Measured on the OHR-Bench corpus (ICCV 2025): 1,261 PDFs / 8,561 pages across 7 domains (textbook, law, finance, newspaper, manual, academic, administration). Every page runs through our full production path (rasterize → bucket routing → model → schema gates → assembly); each system's structured output is chunked under the same budget, embedded with nvidia/llama-nemotron-embed-vl-1b-v2 ("nemotron-vl"), and scored as retrieval hit@5 / MRR@10 over OHR-Bench's ~8.5k human-verified Q&A pairs. These are our own retrieval-harness measurements, not official OHR-Bench generation (LCS/F1) numbers. gt is retrieval over OHR-Bench's human ground-truth structured data; MinerU and PaddleOCR outputs were run through the identical chunking and indexing.

Text retrieval, hit@5 / MRR@10 by evidence type — exact k-nearest-neighbour search over the embeddings (v0.2's table was read through an approximate HNSW index; the exact read is the reference from v0.3 on, so the rows are not directly comparable to the v0.2 card). Best per row in bold:

evidence type	gt (human)	MinerU	PaddleOCR	shrew v0.3 (bf16)
plain text	.976 / .896	.898 / .813	.956 / .878	.946 / .860
multi-evidence	.978 / .883	.956 / .873	.963 / .854	.956 / .850
table	.958 / .842	.927 / .795	.921 / .795	.902 / .782
formula	.969 / .886	.925 / .835	.933 / .858	.939 / .843
chart	.878 / .751	.659 / .540	.668 / .520	.748 / .616
vision	.794 / .580	.634 / .486	.744 / .583	.765 / .622
reading order†	.930 / .839	.942 / .866	.941 / .848	.098 / .090

Against the previous generation (v0.2, same harness, exact read): v0.3 is better overall (paired, p = 0.001) and on plain text (p < 0.001), with no evidence type worse; chart .722 → .748, vision .731 → .765, text .931 → .946, multi-evidence .941 → .956; table and formula within noise.

† Known failure. OHR-Bench draws reading-order queries almost entirely from dense broadsheet newspaper scans, which fall in this model's repetition-loop failure class (see Limitations); with those pages unparsed the attainable ceiling is ~0.14. Treat broadsheet reading order as unsupported in this release.

Figure/table localization vs our own frozen human-annotated gold subset — 551 corpus pages / 1,100 boxes, not an OHR-Bench artifact (greedy match at IoU ≥ 0.5):

arm	figure recall@0.5	figure mean IoU	table recall@0.5	table mean IoU	far false positives
v0.3 bf16	0.644	0.803	0.603	0.806	51
v0.2 bf16	0.617	0.801	0.601	0.805	156

Reliability (production path, 8,561 pages, measured with the v0.2-era server contract): 84.3 % of pages produced valid schema-complete JSON on the first pass, hard failures 2.53 % (v0.2: 84.6 % / 2.77 %), repetition-guard aborts 197 vs 230. Most of the remaining first-pass loss (13 % of pages) was the server rejecting the model's own section_type labels, not a model failure; with shrew-server ≥ 0.3.14 those pages pass the first pass (projected ~96 % first-pass, not yet re-measured corpus-wide). Hard failures are concentrated in the dense-broadsheet loop class and terminate as repetition-guard aborts rather than silent bad output.

INT8 parity (this repo, v0.3): 215 paired one-page inputs (all seven OHR domains plus extra newspaper and handwriting pages, half of them previously-failing) through the same production path on a single RTX 3060 (--dtype half, --gpu-memory-utilization 0.85 --max-num-seqs 4) vs the bf16 model: first-pass clean 92.6 % vs 93.5 %; coerced 0.9 % vs 0.9 %; repetition aborts 4.7 % vs 4.2 %; empty pages 6.5 % vs 5.6 %; on the 199 pages both arms parsed, text similarity median 1.000 with 93.5 % of pairs ≥ 0.90 and section_type agreement 0.986. Two re-runs of the same INT8 weights differ by the same margins (2 of 40 hard pages flip status between draws), so the residual gap is serving nondeterminism, not quantization. Corpus-wide INT8 retrieval tables are not re-measured for v0.3; the v0.2 card measured INT8 at or above bf16 on 5 of 7 evidence types with the same recipe.

Limitations

• Difficult documents. Dense broadsheet scans (historical newspapers), low-resolution scans of dense layouts, and pages whose text the vision tower cannot resolve can produce repetition loops instead of output. The streaming guard above converts these into fast, detectable failures. Work on this class is ongoing.
• CJK, Cyrillic, Arabic and handwriting are unsupported. The model is trained and evaluated on Latin-script print; non-Latin scripts loop or transcribe poorly. Multilingual coverage is planned.
• Bounding boxes are model-supervised. Figure/table geometry is trained from model-generated labels with automated repair; boxes are generally tight but can under- or over-shoot on unusual layouts. Pad boxes outward slightly when cropping; do not treat edges as pixel-exact.
• One page per request. The model has no cross-page state; feed multi-page documents page by page and assemble downstream.
• Reading order on dense broadsheets scores near the failure floor (see Results). Same failure class as the first bullet.

Versions

variant	precision	size	notes
shrew-ocr-preview	bf16	7.5 GB	reference quality (v0.3 / E6)
shrew-ocr-preview-GPTQ-8bit	INT8 LM / bf16 vision (this repo)	4.9 GB	~1.8× serving throughput; v0.3 parity card vs bf16 PASS; serve with --dtype half
shrew-ocr-preview-GGUF	Q8_0 or f16 LM / f16 vision	3.6–6.8 GB	llama.cpp; full context per slot required (-c = N × 32768)
shrew-ocr-preview-lora	LoRA adapter (r=256, bf16)	2.0 GB	for composition / continued training — serve the merged variants instead

Changelog

v0.3 (2026-09-14, tag v0.3) — generation E6. New LoRA (same r=256 recipe, 1 epoch / 1,343 steps, eval_loss 0.1408 vs 0.1421) trained on the up-weighted dense/broadsheet slices with the open section_type taxonomy; merged bf16, GPTQ-8bit, GGUF and adapter pushed in lockstep. Promoted on six pre-registered criteria (retrieval paired PASS, product gates PASS, regions PASS, parity TIE, contract screens PASS, image surface flat). Loops on OmniDocBench newspapers 66 % → 46 % in isolation; figure far-false-positives 156 → 51. The INT8 variant was gated by a 215-page product-path parity card against bf16 (all criteria met; text similarity median 1.000 on pages both arms parsed). Requires shrew-server ≥ 0.3.14 for the 36-value section_type contract. Buckets / pinpoints unchanged from v0.2. Retrieval tables are now the exact-kNN read.

v0.2 — glyph-routed tile buckets (E4); first GPTQ-8bit and GGUF releases.

This is a preview: weights update in place under these names as the model improves. Each weight push's commit message records the training and calibration generation — pin a commit (revision=) for reproducibility.

Base model: ibm-granite/granite-vision-4.1-4b (Apache 2.0). The vision tower is unchanged from the base; all fine-tuning lives in the language model.