id stringlengths 11 11 | images listlengths 1 4 | conversations listlengths 2 2 |
|---|---|---|
Shaft_03264 | [
"images/Shaft_03264.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 114.4 mm to allow machining a... |
Shaft_01016 | [
"images/Shaft_01016.png",
"detail_png/Shaft_01016_length.png",
"detail_png/Shaft_01016_diam.png",
"detail_png/Shaft_01016_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.5 mm and length at least 27... |
Shaft_02543 | [
"images/Shaft_02543.png",
"detail_png/Shaft_02543_length.png",
"detail_png/Shaft_02543_diam.png",
"detail_png/Shaft_02543_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.6 mm and lengt... |
Shaft_00243 | [
"images/Shaft_00243.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.4 mm and length at least 110.1 mm to allow machining a... |
Shaft_02676 | [
"images/Shaft_02676.png",
"detail_png/Shaft_02676_length.png",
"detail_png/Shaft_02676_diam.png",
"detail_png/Shaft_02676_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø57.7 mm and length at least 222.7 ... |
Shaft_02056 | [
"images/Shaft_02056.png",
"detail_png/Shaft_02056_length.png",
"detail_png/Shaft_02056_diam.png",
"detail_png/Shaft_02056_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø39.1 mm and length at least 88.6 m... |
Shaft_01030 | [
"images/Shaft_01030.png",
"detail_png/Shaft_01030_length.png",
"detail_png/Shaft_01030_diam.png",
"detail_png/Shaft_01030_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.8 mm and length at... |
Shaft_04723 | [
"images/Shaft_04723.png",
"detail_png/Shaft_04723_length.png",
"detail_png/Shaft_04723_diam.png",
"detail_png/Shaft_04723_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 25... |
Shaft_01421 | [
"images/Shaft_01421.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 313.2 mm to allow machining allow... |
Shaft_00991 | [
"images/Shaft_00991.png",
"detail_png/Shaft_00991_length.png",
"detail_png/Shaft_00991_diam.png",
"detail_png/Shaft_00991_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.1 mm and lengt... |
Shaft_01831 | [
"images/Shaft_01831.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.2 mm and length at least 203.9 mm to allow machining a... |
Shaft_02921 | [
"images/Shaft_02921.png",
"detail_png/Shaft_02921_length.png",
"detail_png/Shaft_02921_diam.png",
"detail_png/Shaft_02921_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.7 mm and length at... |
Shaft_02948 | [
"images/Shaft_02948.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø38.0 mm and length at least 255.7 mm to allow machining allow... |
Shaft_04710 | [
"images/Shaft_04710.png",
"detail_png/Shaft_04710_length.png",
"detail_png/Shaft_04710_diam.png",
"detail_png/Shaft_04710_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø64.0 mm and length at least 284.9 ... |
Shaft_03196 | [
"images/Shaft_03196.png",
"detail_png/Shaft_03196_length.png",
"detail_png/Shaft_03196_diam.png",
"detail_png/Shaft_03196_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.4 mm and lengt... |
Shaft_04246 | [
"images/Shaft_04246.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø46.8 mm and length at least 256.6 mm to allow machining allow... |
Shaft_02505 | [
"images/Shaft_02505.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.2 mm and length at least 76.2 mm to allow... |
Shaft_00031 | [
"images/Shaft_00031.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.3 mm and length at least 212.8 mm to allow machining a... |
Shaft_02252 | [
"images/Shaft_02252.png",
"detail_png/Shaft_02252_length.png",
"detail_png/Shaft_02252_diam.png",
"detail_png/Shaft_02252_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.6 mm and lengt... |
Shaft_03120 | [
"images/Shaft_03120.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 144.4 mm to allow machining a... |
Shaft_01077 | [
"images/Shaft_01077.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.3 mm and length at least 221.3 mm to allo... |
Shaft_03752 | [
"images/Shaft_03752.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.7 mm and length at least 145.7 mm to allow machining a... |
Shaft_01853 | [
"images/Shaft_01853.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.3 mm and length at least 232.3 mm to allo... |
Shaft_04921 | [
"images/Shaft_04921.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.9 mm and length at least 280.0 mm to allo... |
Shaft_02611 | [
"images/Shaft_02611.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø61.6 mm and length at least 89.7 mm to allow machining allowa... |
Shaft_02532 | [
"images/Shaft_02532.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø35.5 mm and length at least 284.2 mm to allow machining allow... |
Shaft_04318 | [
"images/Shaft_04318.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.7 mm and length at least 97.6 mm to allow mac... |
Shaft_02965 | [
"images/Shaft_02965.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.9 mm and length at least 281.4 mm to allow machining a... |
Shaft_04794 | [
"images/Shaft_04794.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.1 mm and length at least 208.9 mm to allow ma... |
Shaft_04507 | [
"images/Shaft_04507.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 92.2 mm to allow mac... |
Shaft_03612 | [
"images/Shaft_03612.png",
"detail_png/Shaft_03612_length.png",
"detail_png/Shaft_03612_diam.png",
"detail_png/Shaft_03612_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.4 mm and length at least 19... |
Shaft_03523 | [
"images/Shaft_03523.png",
"detail_png/Shaft_03523_length.png",
"detail_png/Shaft_03523_diam.png",
"detail_png/Shaft_03523_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.3 mm and length at... |
Shaft_02630 | [
"images/Shaft_02630.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.7 mm and length at least 308.2 mm to allow ma... |
Shaft_01297 | [
"images/Shaft_01297.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.3 mm and length at least 143.2 mm to allow machining a... |
Shaft_04321 | [
"images/Shaft_04321.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø59.8 mm and length at least 226.7 mm to allow machining allow... |
Shaft_01386 | [
"images/Shaft_01386.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.1 mm and length at least 192.1 mm to allo... |
Shaft_02500 | [
"images/Shaft_02500.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø57.9 mm and length at least 309.2 mm to allow machining allow... |
Shaft_02927 | [
"images/Shaft_02927.png",
"detail_png/Shaft_02927_length.png",
"detail_png/Shaft_02927_diam.png",
"detail_png/Shaft_02927_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.8 mm and length at... |
Shaft_03401 | [
"images/Shaft_03401.png",
"detail_png/Shaft_03401_length.png",
"detail_png/Shaft_03401_diam.png",
"detail_png/Shaft_03401_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.3 mm and length at least 27... |
Shaft_00552 | [
"images/Shaft_00552.png",
"detail_png/Shaft_00552_length.png",
"detail_png/Shaft_00552_diam.png",
"detail_png/Shaft_00552_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.9 mm and lengt... |
Shaft_01618 | [
"images/Shaft_01618.png",
"detail_png/Shaft_01618_length.png",
"detail_png/Shaft_01618_diam.png",
"detail_png/Shaft_01618_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.0 mm and length at least 16... |
Shaft_04271 | [
"images/Shaft_04271.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.5 mm and length at least 133.6 mm to allow machining a... |
Shaft_03016 | [
"images/Shaft_03016.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø46.7 mm and length at least 188.1 mm to allow machining allow... |
Shaft_03164 | [
"images/Shaft_03164.png",
"detail_png/Shaft_03164_length.png",
"detail_png/Shaft_03164_diam.png",
"detail_png/Shaft_03164_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.4 mm and lengt... |
Shaft_00538 | [
"images/Shaft_00538.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.4 mm and length at least 262.3 mm to allo... |
Shaft_01912 | [
"images/Shaft_01912.png",
"detail_png/Shaft_01912_length.png",
"detail_png/Shaft_01912_diam.png",
"detail_png/Shaft_01912_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.7 mm and lengt... |
Shaft_03387 | [
"images/Shaft_03387.png",
"detail_png/Shaft_03387_length.png",
"detail_png/Shaft_03387_diam.png",
"detail_png/Shaft_03387_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.2 mm and length at least 14... |
Shaft_03032 | [
"images/Shaft_03032.png",
"detail_png/Shaft_03032_length.png",
"detail_png/Shaft_03032_diam.png",
"detail_png/Shaft_03032_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.8 mm and lengt... |
Shaft_01454 | [
"images/Shaft_01454.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.3 mm and length at least 311.5 mm to allow machining a... |
Shaft_02081 | [
"images/Shaft_02081.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.5 mm and length at least 295.2 mm to allow machining a... |
Shaft_04748 | [
"images/Shaft_04748.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 215.6 mm to allo... |
Shaft_01738 | [
"images/Shaft_01738.png",
"detail_png/Shaft_01738_length.png",
"detail_png/Shaft_01738_diam.png",
"detail_png/Shaft_01738_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.8 mm and length at... |
Shaft_03521 | [
"images/Shaft_03521.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.6 mm and length at least 169.2 mm to allow ma... |
Shaft_01772 | [
"images/Shaft_01772.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.3 mm and length at least 211.6 mm to allow machining a... |
Shaft_01497 | [
"images/Shaft_01497.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.4 mm and length at least 206.4 mm to allow ma... |
Shaft_03316 | [
"images/Shaft_03316.png",
"detail_png/Shaft_03316_length.png",
"detail_png/Shaft_03316_diam.png",
"detail_png/Shaft_03316_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.7 mm and length at least 25... |
Shaft_00645 | [
"images/Shaft_00645.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 170.2 mm to allow machining allow... |
Shaft_00188 | [
"images/Shaft_00188.png",
"detail_png/Shaft_00188_length.png",
"detail_png/Shaft_00188_diam.png",
"detail_png/Shaft_00188_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.4 mm and length at least 14... |
Shaft_01969 | [
"images/Shaft_01969.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.4 mm and length at least 79.0 mm to allow machining al... |
Shaft_03759 | [
"images/Shaft_03759.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.9 mm and length at least 241.1 mm to allow ma... |
Shaft_04581 | [
"images/Shaft_04581.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø48.3 mm and length at least 313.6 mm to allow machining allow... |
Shaft_04248 | [
"images/Shaft_04248.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 259.7 mm to allow ma... |
Shaft_03907 | [
"images/Shaft_03907.png",
"detail_png/Shaft_03907_length.png",
"detail_png/Shaft_03907_diam.png",
"detail_png/Shaft_03907_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.7 mm and length at... |
Shaft_00067 | [
"images/Shaft_00067.png",
"detail_png/Shaft_00067_length.png",
"detail_png/Shaft_00067_diam.png",
"detail_png/Shaft_00067_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and lengt... |
Shaft_03588 | [
"images/Shaft_03588.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø34.2 mm and length at least 128.2 mm to allow machining allow... |
Shaft_02225 | [
"images/Shaft_02225.png",
"detail_png/Shaft_02225_length.png",
"detail_png/Shaft_02225_diam.png",
"detail_png/Shaft_02225_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.7 mm and length at least 28... |
Shaft_02832 | [
"images/Shaft_02832.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.9 mm and length at least 236.5 mm to allow machining a... |
Shaft_02990 | [
"images/Shaft_02990.png",
"detail_png/Shaft_02990_length.png",
"detail_png/Shaft_02990_diam.png",
"detail_png/Shaft_02990_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 30... |
Shaft_01082 | [
"images/Shaft_01082.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.0 mm and length at least 110.1 mm to allow machining a... |
Shaft_00232 | [
"images/Shaft_00232.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.3 mm and length at least 221.3 mm to allow machining a... |
Shaft_03055 | [
"images/Shaft_03055.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.7 mm and length at least 233.1 mm to allo... |
Shaft_04782 | [
"images/Shaft_04782.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø42.3 mm and length at least 232.7 mm to allow machining allow... |
Shaft_03317 | [
"images/Shaft_03317.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.7 mm and length at least 65.4 mm to allow... |
Shaft_03584 | [
"images/Shaft_03584.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.3 mm and length at least 86.3 mm to allow... |
Shaft_04673 | [
"images/Shaft_04673.png",
"detail_png/Shaft_04673_length.png",
"detail_png/Shaft_04673_diam.png",
"detail_png/Shaft_04673_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.9 mm and lengt... |
Shaft_03322 | [
"images/Shaft_03322.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.5 mm and length at least 74.1 mm to allow mac... |
Shaft_03979 | [
"images/Shaft_03979.png",
"detail_png/Shaft_03979_length.png",
"detail_png/Shaft_03979_diam.png",
"detail_png/Shaft_03979_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.5 mm and length at least 26... |
Shaft_02800 | [
"images/Shaft_02800.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.1 mm and length at least 230.0 mm to allow ma... |
Shaft_04114 | [
"images/Shaft_04114.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.1 mm and length at least 191.6 mm to allo... |
Shaft_04877 | [
"images/Shaft_04877.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.3 mm and length at least 293.8 mm to allow machining a... |
Shaft_01467 | [
"images/Shaft_01467.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.9 mm and length at least 237.2 mm to allow machining a... |
Shaft_03394 | [
"images/Shaft_03394.png",
"detail_png/Shaft_03394_length.png",
"detail_png/Shaft_03394_diam.png",
"detail_png/Shaft_03394_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.1 mm and lengt... |
Shaft_02631 | [
"images/Shaft_02631.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.0 mm and length at least 291.1 mm to allow ma... |
Shaft_01499 | [
"images/Shaft_01499.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.9 mm and length at least 213.8 mm to allo... |
Shaft_03438 | [
"images/Shaft_03438.png",
"detail_png/Shaft_03438_length.png",
"detail_png/Shaft_03438_diam.png",
"detail_png/Shaft_03438_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø41.4 mm and length at least 170.4 ... |
Shaft_02285 | [
"images/Shaft_02285.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.0 mm and length at least 133.1 mm to allo... |
Shaft_01531 | [
"images/Shaft_01531.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 311.9 mm to allow machining a... |
Shaft_00747 | [
"images/Shaft_00747.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.6 mm and length at least 152.7 mm to allow machining a... |
Shaft_03360 | [
"images/Shaft_03360.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.8 mm and length at least 214.5 mm to allow machining a... |
Shaft_04618 | [
"images/Shaft_04618.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.0 mm and length at least 316.6 mm to allow machining a... |
Shaft_02705 | [
"images/Shaft_02705.png",
"detail_png/Shaft_02705_length.png",
"detail_png/Shaft_02705_diam.png",
"detail_png/Shaft_02705_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.7 mm and length at least 93... |
Shaft_04216 | [
"images/Shaft_04216.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.3 mm and length at least 91.5 mm to allow mac... |
Shaft_03452 | [
"images/Shaft_03452.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.7 mm and length at least 295.3 mm to allow machining a... |
Shaft_01471 | [
"images/Shaft_01471.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.3 mm and length at least 69.6 mm to allow machining al... |
Shaft_03334 | [
"images/Shaft_03334.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.7 mm and length at least 195.0 mm to allo... |
Shaft_04090 | [
"images/Shaft_04090.png",
"detail_png/Shaft_04090_length.png",
"detail_png/Shaft_04090_diam.png",
"detail_png/Shaft_04090_title.png"
] | [
{
"from": "user",
"value": "<image>\n<image>\n<image>\n<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.5 mm and length at least 15... |
Shaft_00916 | [
"images/Shaft_00916.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø68.6 mm and length at least 315.6 mm to allow machining allow... |
Shaft_04879 | [
"images/Shaft_04879.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material C45) with diameter at least Ø38.6 mm and length at least 221.1 mm to allow machining allow... |
Shaft_04123 | [
"images/Shaft_04123.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 206.3 mm to allow machining a... |
Shaft_00994 | [
"images/Shaft_00994.png"
] | [
{
"from": "user",
"value": "<image>\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."
},
{
"from": "assistant",
"value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.2 mm and length at least 257.8 mm to allow machining a... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.